Need help with Singer knee controller.
#1
Junior Member
Thread Starter
Join Date: Mar 2018
Location: Central Kentucky
Posts: 132
Need help with Singer knee controller.
Does any one know how remove this knee controller from the cabinet? It's a singer cabinet from the 1920's. I was expecting a button style peddle, this is what I found. It all appears to be hard wired. No connectors anywhere.
#3
Senior Member
Join Date: Apr 2020
Location: South of St Louis
Posts: 836
I just took one of those out of a table, the actual controller was attached to a large plate, along with the knee lever. I took out the whole plate, lever, etc.
i know at least the black cover comes of because a few years ago i removed the cover to rewire the machine in the table. My recollection is the controller stayed attached to the pkate.
i know at least the black cover comes of because a few years ago i removed the cover to rewire the machine in the table. My recollection is the controller stayed attached to the pkate.
#4
Junior Member
Thread Starter
Join Date: Mar 2018
Location: Central Kentucky
Posts: 132
Thanks Joe. Guess I'll have to take the bracket out. In the mean time I've taken the wires off of the three pin connector and taken the machine out. It's a Singer 101 in a beautiful cabinet.
#5
Senior Member
Join Date: Apr 2020
Location: South of St Louis
Posts: 836
I just dug out the parts, there is a screw on the back side of the black cover over the controller, if you can get to that without taking off the whole thing the black cover slides down over the controller and you can get to the terminals.
My table with this was a fire mahogany split down the middle, a beautiful table. It came to me with a White Model 65 in it and was the set up which started me with vintage machines.
My table with this was a fire mahogany split down the middle, a beautiful table. It came to me with a White Model 65 in it and was the set up which started me with vintage machines.