Stitch and Flip Corner Methods
#1
Super Member
Thread Starter
Join Date: Jun 2017
Posts: 1,386
Stitch and Flip Corner Methods
I'm planning on making a large quilt made up of 5" x 9" rectangle blocks with stitch and flip (or folded) corners - similar to flying geese but done on both ends of the rectangle. There was a recent thread ISO an older Tula Pink pattern called Pancakes and while searching for it I fell in love with a picture of one made in all teal/aqua - so here I go!
My question: Which method and/or ruler do you prefer for adding the folded corners? And why?
I'm familiar with several methods and rulers but it's been awhile since I've had to make 250-300 of these blocks. I'm thinking either the exact cut squares (which produce the wasted tip) or triangles (should have less waste). With the triangles I can cut over-sized and trim down if I need to.
I'm a stickler when cutting fabric and sewing a scant 1/4" seam but my folded corners never seem to come out accurate or I lose my point. I don't have an AccuQuilt but recently picked-up the Stripology XL ruler which I think will help.
I'm curious what method you all prefer - thanks for the input!
My question: Which method and/or ruler do you prefer for adding the folded corners? And why?
I'm familiar with several methods and rulers but it's been awhile since I've had to make 250-300 of these blocks. I'm thinking either the exact cut squares (which produce the wasted tip) or triangles (should have less waste). With the triangles I can cut over-sized and trim down if I need to.
I'm a stickler when cutting fabric and sewing a scant 1/4" seam but my folded corners never seem to come out accurate or I lose my point. I don't have an AccuQuilt but recently picked-up the Stripology XL ruler which I think will help.
I'm curious what method you all prefer - thanks for the input!
Last edited by TheMerkleFamily; 07-30-2022 at 09:46 AM.
#2
Of all the methods I prefer doing folded corners with my Creative Grids folded corner clipper, no wasted fabric and far more accurate IMHO.
https://youtu.be/cpSZ6lqvc34
https://youtu.be/cpSZ6lqvc34
#3
Super Member
Join Date: Jan 2015
Posts: 2,867
I prefer the square sewn to the corner and the excess cut off. I know it wastes fabric, but it comes out so exact that way. I fold and press my diagonal rather than draw a line. I sew two threads off the fold toward the corner. That allows the fold to use up a little space.
#5
#6
Member
Join Date: Sep 2017
Posts: 35
Julie at The Crafty Quilter just did a review on 3 stitch and flip tools. See it here: The Stitch and Flip Quilting Method using specialty rulers
#7
Super Member
Thread Starter
Join Date: Jun 2017
Posts: 1,386
Thanks for the feedback everyone.
I had watched Julie at the Crafty Quilter's review earlier and I happen to own all three of those tools but only have the Creative Grids Folded Corner Clipper on hand (the others are boxed up and in storage).
The blocks I'm making are rather large and the seams must all meet up properly to create the intended design. I will make a few test blocks with the CG's tool but do wish I had the Deb Tucker Corner Pop tool with me because it's larger/longer with extended guide lines that line-up along the edge of the tall base block. For this size block I think that would be helpful (along with accurate measuring/cutting of the fabric).
In the end, I agree with Judy at The Crafty Quilter - I like all three of the tools for different reasons.
I had watched Julie at the Crafty Quilter's review earlier and I happen to own all three of those tools but only have the Creative Grids Folded Corner Clipper on hand (the others are boxed up and in storage).
The blocks I'm making are rather large and the seams must all meet up properly to create the intended design. I will make a few test blocks with the CG's tool but do wish I had the Deb Tucker Corner Pop tool with me because it's larger/longer with extended guide lines that line-up along the edge of the tall base block. For this size block I think that would be helpful (along with accurate measuring/cutting of the fabric).
In the end, I agree with Judy at The Crafty Quilter - I like all three of the tools for different reasons.
#8
Member
Join Date: Dec 2011
Location: VA/tidewater area
Posts: 74
Stitch & Flip corner methods
Of all the methods I prefer doing folded corners with my Creative Grids folded corner clipper, no wasted fabric and far more accurate IMHO.
https://youtu.be/cpSZ6lqvc34
https://youtu.be/cpSZ6lqvc34
#10
Member
Join Date: Jun 2019
Posts: 31
I just finished a quilt top (Tula Pink's Pining for you) that has snowballed corners, with great success. I tried the CG ruler and was not satisfied. Instead I drew my diagonal sew lines on the back of the large focus fabric, not on the little patches that can easily shift. This way I know exactly were the corners will touch. I have also taken to using this method for flying geese. No more wobbly geese for me.