Go Back  Quiltingboard Forums >
  • Main
  • Please help me.. I have absolutely no idea! >
  • Please help me.. I have absolutely no idea!

  • Please help me.. I have absolutely no idea!

    Thread Tools
     
    Old 12-30-2016, 08:51 PM
      #21  
    Super Member
     
    Join Date: Nov 2010
    Location: Florida
    Posts: 1,611
    Default

    The only silly question is the unasked question. You asked about something that is very important to you and you want to learn. I'm not sure, but maybe the bobbin thread has been wound too loosely or the tension is not tight enough. My Pfaff has the automatic threader and at first, I couldn't get it to work. Then I noticed there is a tiny hook on it that the thread has to go behind. Once the thread is hooked there you just let the lever go and it threads the needle. My machine might be different from yours. I think mine is an older model I purchased in 1997. I hope someone here can give you the information you need and then you can have fun sewing.
    Tropical is offline  
    Old 12-30-2016, 09:03 PM
      #22  
    Super Member
     
    Join Date: Aug 2013
    Posts: 9,299
    Default

    Don't be embarrassed. Not all machines are threaded the exact same way. I would have to look up the Pfaff way if I had inherited one. I'm sorry for your loss. (((hugs))))
    zozee is offline  
    Old 12-30-2016, 09:03 PM
      #23  
    Super Member
     
    Join Date: Aug 2010
    Location: Tampa Bay Area, Florida
    Posts: 2,229
    Default

    You've received some really great help on your machine. I would like to suggest you use pieces of lined notebook paper to practice sewing a straight line. No thread in the machine at all just let the needle punch the paper along the lines. This helps you get comfortable, figure out the speed, adjust to the foot pedal etc then move onto scrap fabric like old sheets. (You can pick them up cheap at thrift, second hand stores, Salvation Army etc) So sorry about your Mom. I feel close to my Mom & Grandma when I sew. My Grandma's been gone many years, my Mom just a few years ago. Sewing brings back all kinds of good memories. {{Big Internet hug!}}

    Last edited by Cybrarian; 12-30-2016 at 09:09 PM.
    Cybrarian is offline  
    Old 12-30-2016, 11:30 PM
      #24  
    Kas
    Super Member
     
    Kas's Avatar
     
    Join Date: Jun 2010
    Location: Renton, WA
    Posts: 2,045
    Default

    FlyingFeathers, I have the 2030. It sounds to me like the presser foot was not raised when you threaded the machine. So do that first and pull about three or four inches (more might be better) of thread out so when you raise the bobbin thread it won't pull out of your hand. Also, the bobbin case might not be seated all the way. I sometimes have this problem. You want to hold the little lever on the bobbin case out while you are putting it into the machine. Then let go and push. It should make a click sound when it seats. See page 25 of the manual and page 28. Also, check to see if the feed dogs are up or down. See page 28 for that. There is a button that slides to the left or the right on the front bottom of the machine. It's the only button on that plain. Make sure it is all the way to the right.
    Kas is offline  
    Old 12-31-2016, 03:14 AM
      #25  
    Senior Member
     
    Join Date: Oct 2011
    Posts: 568
    Default

    Good morning,
    Sorry to hear about your mom. Regardless of how long ago she passed away, there's always a special place for her in your heart. I'm sure she would love it if you picked up her love of sewing.

    I have the same Pfaff machine and I love it, so don't give up. :-). I would see if you can find a repair shop and have it checked out. Threading the bobbin and machine correctly are really important so you want to make sure that's being done correctly.

    Sometimes there are pieces of thread that get caught underneath that can cause problems. Make sure there aren't any extra threads in the bobbin area.

    I've not had any problems with losing the threads when I start sewing. In fact, that's one thing I like about the machine. It seems to start without a lot of fuss.

    It may just need a good cleaning or a few adjustments. Hope you're able to get it worked out.

    Happy New Year.
    bneuen is offline  
    Old 12-31-2016, 05:41 AM
      #26  
    Super Member
     
    Join Date: Mar 2011
    Location: in the sticks of PA
    Posts: 2,309
    Default

    I just wanted to say my deepest condolences for the loss of your mom, but also welcome to the board I hope you stick around there is a lot of knowledge to be had here!
    Ariannaquilts is offline  
    Old 12-31-2016, 06:07 AM
      #27  
    Super Member
     
    Join Date: May 2012
    Location: Central Wisconsin
    Posts: 4,391
    Default

    Originally Posted by Onebyone
    If the needle hole is left to right not front to back you may be putting the thread in the needle the wrong direction. Check in your area for a sew group or guild you can visit. They will be happy to help you figure out your machine.
    This was my thought also. The thread goes into the needle from the side on which you find the last thread guide.
    A lot of people don't realize that needles are threaded from left to right on some machines and from right to left on others.

    Hope you can make this work.
    maviskw is offline  
    Old 12-31-2016, 07:52 AM
      #28  
    Super Member
     
    Join Date: Jul 2010
    Posts: 6,430
    Default

    Hello! NO question is silly. How else do we learn. You have a machine from a company with a good reputation. Very likely there is nothing wrong with the machine; you aren't used to it. If you are a church-goer, someone there might be willing to help you and a lot of churches have quilting groups. If so, someone might be willing to "get you started." I wish you the best of luck in your new endeavors. I have sewn for over 70 years and have made everything on my workhorse machine, including sofa covers, car seat covers, suits for me and my husband, dance dresses, etc., and enjoyed every minute of my quilting. Please check back in and let us know of your progress.
    carolynjo is offline  
    Old 12-31-2016, 02:11 PM
      #29  
    Junior Member
     
    starr511's Avatar
     
    Join Date: Sep 2012
    Posts: 122
    Default

    Sorry I can't give any advise on your sewing machine but I was excited when I read you had greyhounds! We have 4 ex racers! Have fun with learning to sew. In no time you will be making martingale collars! Cheers!
    starr511 is offline  
    Old 12-31-2016, 03:43 PM
      #30  
    Junior Member
     
    lmc8's Avatar
     
    Join Date: Jan 2011
    Location: Mesa, AZ
    Posts: 268
    Default

    You should be able to class at a local Pfaff sewing center on proper use and maintenance of your machine.
    lmc8 is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    patty48
    Pictures
    67
    10-31-2012 12:25 PM
    LMB
    Introduce Yourself
    60
    02-05-2011 03:52 PM
    Quilt4u
    Main
    55
    04-15-2010 07:06 AM
    thequilteddove
    Main
    1
    11-26-2009 01:19 PM
    mamatobugboo
    General Chit-Chat (non-quilting talk)
    5
    05-09-2009 06:55 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter