Go Back  Quiltingboard Forums >
  • Main
  • USING DRIER SHEETS IN QUILTING >
  • USING DRIER SHEETS IN QUILTING

  • USING DRIER SHEETS IN QUILTING

    Thread Tools
     
    Old 01-27-2011, 11:54 AM
      #61  
    Super Member
     
    bluteddi's Avatar
     
    Join Date: Sep 2010
    Location: MN
    Posts: 2,411
    Default

    Originally Posted by Bill'sBonBon
    Originally Posted by QultingaddictUK
    Duh I know I must sound stupid but why and how do you use dryer sheets in quilting? The only use I know of them is how great they are for keeping your Iron clean :!:
    I have used dryer sheets and the experiments are interesting,I will continue to use them. I wash with detergent, bleach and put them in a net bag wash twice before I use them.
    Now to ans. your question Quiltingaddict for myself :-D only :!: They are already there,recyclable and really do a good job of stablizing(,except for Tee's) My own experiment. Also,If you are on a set income,retired as I am there sometimes just not enough of money to go around for expensive stuff as Tear away,bonding commerical stuff.
    BillsBonBon
    I understand recycing and keeping costs down. I haven't used the dryer sheets or coffee filters... but in a pinch... I would. I currently use some " wedding aisle runner" for stabilizer... it works great !! I found a huge roll of it at Goodwill for under $2.00!!!!!! U have to get inventive and creative in these tough economic times....!
    bluteddi is offline  
    Old 01-27-2011, 12:17 PM
      #62  
    Super Member
     
    patdesign's Avatar
     
    Join Date: Mar 2010
    Location: So. Fla now, Va orig
    Posts: 1,565
    Default

    Originally Posted by misseva
    Originally Posted by stitchofclass2
    Originally Posted by oma66
    I just did a test in my kitchen with dryer sheet, poly-cotton, fusible interfacing and 100% cotton. They all burned the same - quickly. The poly-cotton curled up in flame, the cotton burned the fastest and with much more flame, the fusible burned very quickly and the dryer sheet burned quickly, but not any quicker than the other three. As someone said, put a match to anything and it will burn. I used dryer sheets in quilting and was very alarmed when I read the post this morning, so I did the experiment myself. If you recently saw the damage a candle did to a quilters quilt in progress, you would see just how quickly a quilt will burn without a dryer sheet involved.

    I am always thankful for new information and warnings. I am glad I saw the post so I could see for myself as PatG suggested. Thank you PatG for the suggestion and warning. However, since they all burned the same, I am not afraid of using the dryer sheets.
    Oma! Sorry I am a bit dense. Do you only use USED dryer sheets or do you use NEW dryer sheets? I stopped using dryer sheets in my dryer when I realized that the residue blocked my filter screen. Thanks for the help.
    I don't use dryer sheets any more because I get what looks like grease spots on my dark clothes - sooo I tried using a New ONE - everything looked good UNTIL I pressed my block - bummer - spots. Then I took my block to the sink & washed with detergent - still spots. Maybe they would work if I did like another poster and put them in a mesh bag and run them thru the wash cycle one or two times. Never thought of that. I wanted to use them in strip quilts. I hate cutting foundation pieces and the quilt top would be lighter if I could use dryer sheets.
    Bounty are terrible for leaving grease spots, my dil used snuggle and they work fine. No greasy spots, only kind I use now. :-D
    patdesign is offline  
    Old 01-27-2011, 12:24 PM
      #63  
    Junior Member
     
    Join Date: Jul 2010
    Location: Belfast
    Posts: 289
    Default

    What is a dryer sheet? Is this a bed sheet?
    Mar_ie is offline  
    Old 01-27-2011, 12:34 PM
      #64  
    Senior Member
     
    Join Date: Aug 2010
    Location: Phenix City, Alabama
    Posts: 881
    Default

    Originally Posted by oma66
    I just did a test in my kitchen with dryer sheet, poly-cotton, fusible interfacing and 100% cotton. They all burned the same - quickly. The poly-cotton curled up in flame, the cotton burned the fastest and with much more flame, the fusible burned very quickly and the dryer sheet burned quickly, but not any quicker than the other three. As someone said, put a match to anything and it will burn. I used dryer sheets in quilting and was very alarmed when I read the post this morning, so I did the experiment myself. If you recently saw the damage a candle did to a quilters quilt in progress, you would see just how quickly a quilt will burn without a dryer sheet involved.

    I am always thankful for new information and warnings. I am glad I saw the post so I could see for myself as PatG suggested. Thank you PatG for the suggestion and warning. However, since they all burned the same, I am not afraid of using the dryer sheets.
    burning strips of fabric is one test a textile plant does. it times how long it takes to burn, flame retardent fabrics take longer, but do burn. if a flame reatardent fabric is washed, then the retarder is gone. same with stain resistant. but fabric burns well.
    ann31039 is offline  
    Old 01-27-2011, 12:42 PM
      #65  
    Super Member
     
    misseva's Avatar
     
    Join Date: Jul 2010
    Location: East Arkansas
    Posts: 2,534
    Default

    Originally Posted by Mar_ie
    What is a dryer sheet? Is this a bed sheet?
    It's little sheets of non-woven fabric about the size of a facial tissue that has been treated with fabric softner. Used in the dryer.
    misseva is offline  
    Old 01-27-2011, 03:02 PM
      #66  
    Super Member
     
    Bill'sBonBon's Avatar
     
    Join Date: Jan 2008
    Location: Okeechobee, Florida
    Posts: 1,076
    Default

    Originally Posted by misseva
    Originally Posted by stitchofclass2
    Originally Posted by oma66
    I just did a test in my kitchen with dryer sheet, poly-cotton, fusible interfacing and 100% cotton. They all burned the same - quickly. The poly-cotton curled up in flame, the cotton burned the fastest and with much more flame, the fusible burned very quickly and the dryer sheet burned quickly, but not any quicker than the other three. As someone said, put a match to anything and it will burn. I used dryer sheets in quilting and was very alarmed when I read the post this morning, so I did the experiment myself. If you recently saw the damage a candle did to a quilters quilt in progress, you would see just how quickly a quilt will burn without a dryer sheet involved.

    I am always thankful for new information and warnings. I am glad I saw the post so I could see for myself as PatG suggested. Thank you PatG for the suggestion and warning. However, since they all burned the same, I am not afraid of using the dryer sheets.
    Oma! Sorry I am a bit dense. Do you only use USED dryer sheets or do you use NEW dryer sheets? I stopped using dryer sheets in my dryer when I realized that the residue blocked my filter screen. Thanks for the help.
    I don't use dryer sheets any more because I get what looks like grease spots on my dark clothes - sooo I tried using a New ONE - everything looked good UNTIL I pressed my block - bummer - spots. Then I took my block to the sink & washed with detergent - still spots. Maybe they would work if I did like another poster and put them in a mesh bag and run them thru the wash cycle one or two times. Never thought of that. I wanted to use them in strip quilts. I hate cutting foundation pieces and the quilt top would be lighter if I could use dryer sheets.
    You can make liquid softener by putting your dryer sheets into hot water and letting them soak for a few hours. It is the Wet Clothes and Heat that release the softener . That is the reason I use only used dryer sheets and then with Detergent,bleach wash twice with them in a net mesh bag. you will not have the stains if you do it this way and they are nice and white. BillsBonBon
    Bill'sBonBon is offline  
    Old 01-27-2011, 05:57 PM
      #67  
    Super Member
     
    Join Date: May 2007
    Location: Illinois
    Posts: 3,474
    Default

    thank you for letting eveyone know , i dont use them except to clean my iron off , but others are greatful to know this
    penski is offline  
    Old 01-27-2011, 07:14 PM
      #68  
    Dee
    Super Member
     
    Dee's Avatar
     
    Join Date: Nov 2006
    Location: Pa.
    Posts: 3,612
    Default

    Thanks for sharing the valuable info. Appreciate it.
    Dee is offline  
    Old 01-27-2011, 09:05 PM
      #69  
    Super Member
     
    Join Date: Jan 2011
    Location: USA
    Posts: 1,329
    Default

    Wow, thanks for the info on the dryer sheets.
    IDquilter is offline  
    Old 01-27-2011, 09:51 PM
      #70  
    Super Member
     
    kitsykeel's Avatar
     
    Join Date: Sep 2010
    Location: Salisbury, North Carolina
    Posts: 1,046
    Default

    Help. What are you talking about using dryer sheets in your quilting. Where does it go, is it for applique or what? Am very confused.
    kitsykeel is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    rvsfan
    Main
    5
    12-05-2017 07:54 AM
    carolaug
    Main
    34
    05-24-2014 05:24 AM
    grugirl
    Main
    12
    02-24-2011 03:34 AM
    EagarBeez
    Main
    15
    07-06-2010 04:03 PM
    NewsletterBot
    Main
    6
    07-31-2007 11:33 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter