Go Back  Quiltingboard Forums >
  • Main
  • Need help from my Southern and Southwestern Quilting Sisters >
  • Need help from my Southern and Southwestern Quilting Sisters

  • Need help from my Southern and Southwestern Quilting Sisters

    Thread Tools
     
    Old 05-03-2011, 05:30 PM
      #81  
    Senior Member
     
    Join Date: Sep 2010
    Location: NM
    Posts: 989
    Default

    We got a Halcyon Fujitsu mini-split room air conditioner wall mounted type/heat and cool. Our room faces West with a whole wall of windows. It would get over 100 degrees in the summer. I found the company on the internet and started looking for a local dealer. It mounts on the interior wall and a 3" hole is drilled for the air-conditioner that stays outside on the ground. It is the best thing we could of done for that hot room. Look it up on the internet. It is pricey, but the cool room is worth the cost.
    Pat M. is offline  
    Old 05-03-2011, 08:47 PM
      #82  
    Senior Member
     
    Join Date: Nov 2010
    Location: Merritt Island, FL
    Posts: 672
    Default

    A fan can be put into the a/c ductwork to propel the cooled air to your studio. An air return in the room might also help. Good Luck from an also hot Florida quilter.
    blueheavenfla is offline  
    Old 05-03-2011, 09:09 PM
      #83  
    Senior Member
     
    Grambi's Avatar
     
    Join Date: Mar 2011
    Location: Spring Branch, Texas
    Posts: 981
    Default

    Originally Posted by Pat M.
    We got a Halcyon Fujitsu mini-split room air conditioner wall mounted type/heat and cool. Our room faces West with a whole wall of windows. It would get over 100 degrees in the summer. I found the company on the internet and started looking for a local dealer. It mounts on the interior wall and a 3" hole is drilled for the air-conditioner that stays outside on the ground. It is the best thing we could of done for that hot room. Look it up on the internet. It is pricey, but the cool room is worth the cost.
    I replied earlier because we also did a mini-split with heating capabilities. You don't have to get the heat pump feature if you don't need heat and I'm sure the a/c alone is less expensive. Actually, I'm not "sure" but it stand to reason.
    Grambi is offline  
    Old 05-04-2011, 03:24 AM
      #84  
    Super Member
     
    Rainbow's Avatar
     
    Join Date: Dec 2006
    Location: Fayetteville, NC
    Posts: 1,321
    Default

    My sewing room was always hot...would never be on level with the AC temperature....I turned the DIRECTION of the center fan...and the difference is AMAZING. Beside the fan casing is a black button that goes up or down....just reverse the direction of the button - and see.
    Rainbow is offline  
    Old 05-04-2011, 04:30 AM
      #85  
    Super Member
     
    pollyjvan9's Avatar
     
    Join Date: Mar 2010
    Location: Oklahoma City, OK
    Posts: 3,025
    Default

    A friend of mine years ago had this problem for an upstair room and she and her husband decided to have a room a/c permanently installed in the wall. It didn't look bad, could be turned off when she was out of that room, and cooled up quickly when she wanted to work in the room. Said it didn't seem to add a lot to the electric bill. Oh, her problem was that the room wasn't hooked up to the central air and the ac unit wasn't large enough to add duct work to that room.
    pollyjvan9 is offline  
    Old 05-04-2011, 04:52 AM
      #86  
    Super Member
     
    greenini's Avatar
     
    Join Date: Dec 2010
    Location: Atlanta, Ga
    Posts: 1,516
    Default

    Your solution sounds like it will work, but you might also check with your local utility company on rebates and stuff like that. A lot of times they are running special promotions and you can get some money back anyway to help.

    And Teacherbailey is quite right all an AC unit puts out is hot air! It's a sealed system and keeps the coolant inside. Since light isn't an issue with you, blocking the window off will probably give you the most bang for the buck. In the South they tell you to keep the blinds closed during the hot part of the day and not to open up until it cools off. Still couldn't live here without AC, as far as I am concerned.
    greenini is offline  
    Old 05-04-2011, 11:56 AM
      #87  
    Senior Member
     
    Join Date: Dec 2010
    Location: st. cloud,florida
    Posts: 310
    Default

    try putting window tint on them,you buy at home depot,walmart.My daughter did it to her front windows and it works.
    skeet is offline  
    Old 05-04-2011, 03:59 PM
      #88  
    Senior Member
     
    Join Date: Mar 2010
    Location: Middle Tennessee
    Posts: 702
    Default

    Could you cut a hole in the wall facing the garage attic and put a window/wall unit in that? You would have to figure out how to drain the water that comes off the back of the unit, but you wouldn't be replacing windows.
    ctack2 is offline  
    Old 05-05-2011, 12:57 AM
      #89  
    Super Member
     
    Annya's Avatar
     
    Join Date: Jun 2010
    Location: Queensland Australia
    Posts: 1,388
    Default

    Originally Posted by ruck9085
    Me, I use a small window unit. We have the side by side windows, too, but DH opened one of the windows, set the unit in the window, then places plywood over the rest of the opening and used insulation to block any cracks. The unit works really well. I turn it on about thirty minutes before I start and by the time I go in, the room is comfortably cool. Give it shot. Oh, and the small unit only raised our light bill by about twenty bucks, well worth it, if you ask me.
    That is what I did in my sewing room and bedroom. I bought one and my DH paid for the bedroom one. I am glad to have them. We have a big one in the lounge room since both the bedroom and lounge are on the west ( hottest side in Summertime.
    Annya is offline  
    Old 05-06-2011, 01:56 PM
      #90  
    Member
     
    Join Date: Dec 2010
    Location: Waxahachie
    Posts: 15
    Default

    We just put in a "motel" type combo heat and AC unit in my sewing room by cutting a hole in outside wall, building wall box, framing and reconnecting existing electricity. Cost about $1200 and works like a champ. I have windows like yours but didn't want my views blocked. The portable units have to be vented via window (accessory kit).
    Teensy is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Halfsquare
    Offline Events, Announcements, Discussions
    8
    09-30-2011 06:08 PM
    Parrothead
    Pictures
    14
    05-09-2011 03:45 PM
    nursie76
    Main
    11
    04-30-2011 06:40 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter