Quilting a king size on a 10 feet frame
#1
Senior Member
Thread Starter
Join Date: Jul 2013
Location: Montreal, Quebec, Canada
Posts: 459
Hi there,
Could anyone share a tip about how to quilt a king size quilt (118 inches) on a 10 feet quilting frame? My leaders are only 108 inches.
It would be a very simple all over quilting design, nothing fancy that need markings or rulers work.
Thanks!
Annie
Could anyone share a tip about how to quilt a king size quilt (118 inches) on a 10 feet quilting frame? My leaders are only 108 inches.
It would be a very simple all over quilting design, nothing fancy that need markings or rulers work.
Thanks!
Annie
#2
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Is the top assembled? I also have a 10' frame. I didn't add the side borders to the quilt, quilted the middle, then quilted the borders separately then joined using a QAYG method.
I know others have different techniques, and I will also be curious!
I know others have different techniques, and I will also be curious!
#3
Junior Member
Join Date: Feb 2017
Location: St. Louis area
Posts: 212
I've only done one. Ask me if I'll do another! Since the length was too long also I folded one side about 12" over on itself, attached to frame as usual and quilted with a design that could be continued where stopped. Once quilted, removed from frame and reattached with unquilted edge opened out and the quilted edge folded over about 12". Now I don't need to tell you that now that end on the frame is twice as thick as the rest of the sandwich. But it didn't matter because it was at the farthest end of the frame from where I was working. I picked up the design, a pantograph, and finished that edge as usual. I think the worse part for me was reattaching the quilt. It is doable, but I'll never make it a regular practice. I forgot to add this is on a 10' LA frame.
Last edited by Jaiade; 02-10-2018 at 02:48 PM.
#4
I've only done one. Ask me if I'll do another! Since the length was too long also I folded one side about 12" over on itself, attached to frame as usual and quilted with a design that could be continued where stopped. Once quilted, removed from frame and reattached with unquilted edge opened out and the quilted edge folded over about 12". Now I don't need to tell you that now that end on the frame is twice as thick as the rest of the sandwich. But it didn't matter because it was at the farthest end of the frame from where I was working. I picked up the design, a pantograph, and finished that edge as usual. I think the worse part for me was reattaching the quilt. It is doable, but I'll never make it a regular practice. I forgot to add this is on a 10' LA frame.
#5
Power Poster
Join Date: Jul 2010
Location: Eastern Washington
Posts: 29,595
I hope you find a solution that works for you. I'm currently doing up a 118" quilt for our new bed, and will not be using my LA with 10' frame. I'm having someone else do it with a bigger set up. That's the ocd kicking in~~~
#8
Senior Member
Thread Starter
Join Date: Jul 2013
Location: Montreal, Quebec, Canada
Posts: 459
There is no borders in this quilt, it's a pieced design that I would not be able to split easily for any kind of QAYG method. I was thinking of doing something like Jaiade suggested, so I'm happy she can confirm it may work.
I would happily rent some time on a larger set up if I could, be alas there is none closer than 3h drive :-( I'm not doing king size very often. It's for a friend. I start a quilt for her, she waited forever for it, and now she is changing her bed to a king size. Would love to be able to accomodate her need.
I would happily rent some time on a larger set up if I could, be alas there is none closer than 3h drive :-( I'm not doing king size very often. It's for a friend. I start a quilt for her, she waited forever for it, and now she is changing her bed to a king size. Would love to be able to accomodate her need.
Thread
Thread Starter
Forum
Replies
Last Post
dolores
Main
6
11-08-2010 01:16 PM


