Looking for a Stitch Regulator for Juki TL2010Q
#1
Member
Thread Starter
Join Date: May 2016
Posts: 3
Looking for a Stitch Regulator for Juki TL2010Q
Hello,
I set my Juki on a Gracie wooden frame. I am looking for a stitch regulator to use instead of the foot pedal. Does anybody have a suggestion on where to buy a used regulator? I live in Canada, but am able to buy in the USA also.
I set my Juki on a Gracie wooden frame. I am looking for a stitch regulator to use instead of the foot pedal. Does anybody have a suggestion on where to buy a used regulator? I live in Canada, but am able to buy in the USA also.
#4
Senior Member
Join Date: Jan 2013
Posts: 990
Your better bet is to contact the Grace Company. Juki dealers won't know if a third party stitch regulator will work with a machine. The manufacturer of the stitch regulator should know.
#6
Super Member
Join Date: Feb 2014
Location: Davenport, Iowa
Posts: 3,885
The Grace company sells two types of stitch regulators. You have to know if your machine has a two or three prong plug in before ordering. Grace regulators only fit certain Juki machines. Best to call Grace and talk to them before spending between $300 and $600 for a part you may not be able to use.
#7
Member
Join Date: Feb 2014
Posts: 39
I bought a Grace Sure Stitch regulator for my Juki TL-2010Q, which is also on a Grace frame - though a metal one. The foot petal was too short to allow the sewing machine to move on the frame and the electronics means the cord can't be lengthened. The stitch regulator is specific to the sewing machine model and worked like a charm, until it didn't. I worked with a technician at Grace - and the regulator was replaced. The new one is working just fine. (The Juki also needed work while under warranty). I love the set-up and quilted 3 quilts in the last 2 weeks.