Go Back  Quiltingboard Forums >
  • Main
  • Client Quilt  - Unwashed Flannel >
  • Client Quilt - Unwashed Flannel

  • Client Quilt - Unwashed Flannel

    Thread Tools
     
    Old 11-02-2017, 08:11 AM
      #1  
    Super Member
    Thread Starter
     
    MaryKatherine's Avatar
     
    Join Date: Sep 2010
    Location: Guelph, On. -
    Posts: 2,021
    Default Client Quilt - Unwashed Flannel

    Queen sized, flannel top and bottom. I'm figuring I need to Pin Pin Pin.
    Any other suggestions?
    Sigh!

    Last edited by QuiltnNan; 11-02-2017 at 08:31 AM. Reason: remove shouting/ all CAPS
    MaryKatherine is offline  
    Old 11-02-2017, 01:44 PM
      #2  
    Power Poster
     
    nativetexan's Avatar
     
    Join Date: Feb 2009
    Location: home again, after 27 yrs!
    Posts: 19,388
    Default

    other? well i would think the flannel would shrink. I've not used it unwashed. have you? perhaps pinning a ton would suffice, don't know.
    nativetexan is offline  
    Old 11-02-2017, 02:50 PM
      #3  
    Super Member
     
    Join Date: Jun 2011
    Location: Illinois
    Posts: 9,018
    Default

    Are you going to be quilting it? Is that why you have it......I'm sorry but I don't understand your concern about it being unwashed....I must be missing something. Second thought- are you 'making" the quilt from beginning to end and the client has provided the fabric. Is client aware of the shrinkage that will occur when washed?......if she/he is, then just do it, but do not wash before returning it......
    Geri B is offline  
    Old 11-02-2017, 02:56 PM
      #4  
    Senior Member
     
    Join Date: Jun 2011
    Posts: 981
    Default

    I am with Geri. What are you going to be doing? Inquiring minds want to know, lol.
    pewa88 is offline  
    Old 11-02-2017, 07:08 PM
      #5  
    Banned
     
    Join Date: Aug 2014
    Location: Victorian Sweatshop Forum
    Posts: 4,096
    Default

    I think the editing by the moderator removed all context of the post. It makes no sense now.

    Cari
    Cari-in-Oly is offline  
    Old 11-02-2017, 07:42 PM
      #6  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    Are you quilting it on a frame? Honestly, I don't think it would require any unusual handling. Just make sure it stays square to the frame as you roll. And don't stretch the backing too tight; you don't want it to spring back when you take it off the frame. (That is assuming you are using side tensioners on the backing.)

    If necessary, you can use a little basting spray underneath the quilt top to keep it parts of it flat to the batting. It is easier to do this if you float the top because you can get all the way across the portion you are quilting. However, I have used it on rolled tops along the edges to help keep them in place.

    The batting you use will control the amount of shrinkage when the quilt is washed. Polyester batting would provide the least amount of shrinkage. With cotton batting you can expect up to 5% shrinkage when the quilt is washed. (This is assuming quilting lines are no more than 3" or 4" apart at most. Close quilting locks the top and backing to the batting, which is much stronger than the other two layers.) As long as the amount of quilting is even across the quilt, the quilt should shrink evenly.

    I would probably pin the sides.

    Also, once the quilt is loaded and the side tensioners are on (and, if the top is floated, the top is secured to a rail), I would probably mist the quilt top several times with spray starch, letting the starch dry in-between mistings. A hair dryer speeds the drying process. Even that small amount of starch will help stabilize the top while you quilt. The backing should be sufficiently stabilized by the side tensioners.

    Hope all this is clearer than mud!

    Edit: Sharon Schamber has a Youtube video showing how she spray starches her backings when loading a quilt. I would consider doing this as well. Here is a link to her video (starching starts about 3 minutes in):
    https://www.youtube.com/watch?v=AlZxLvwOvrE

    Last edited by Prism99; 11-02-2017 at 07:46 PM.
    Prism99 is offline  
    Old 11-02-2017, 07:46 PM
      #7  
    Super Member
     
    Join Date: Aug 2011
    Location: kansas
    Posts: 6,407
    Default

    MaryKatherine--have you talked with your client about your concerns? I'm wondering if she did not pre-wash the top, having her pre-wash the back won't make any difference in the long run. So guess I'd go ahead and quilt and tell her to expect it to do lots of crinkling when she washes due to nature of flannel, maybe suggest that when she does wash, that she lays flat to dry since air drying won't shrink as much as dryer heat.
    As far as quilting--i'm thinking that a less dense quilting will cause less stretching as you quilt. I'd be most concerned about the back stetching and getting puckers. Maybe before you put the bat and top on the frame, you could spray the back with water to get some shrinkage and avoid the puckers??
    quiltingshorttimer is offline  
    Old 11-03-2017, 03:26 AM
      #8  
    Senior Member
     
    cindi's Avatar
     
    Join Date: May 2011
    Location: Central Ohio
    Posts: 989
    Default

    Unwashed flannel? My flannel backing shrinks up at LEAST 4-5“ both ways when I pre-wash it, no matter the quality. If she didn’t pre-wash the flannels for the top, it’ll probably shrink up pretty evenly. It’s her quilt to have done as she wishes, but I’d give her warning. I wouldn’t quilt it densely. Simple quilting would be my suggestion....
    cindi is offline  
    Old 11-03-2017, 06:55 AM
      #9  
    Senior Member
     
    Join Date: Nov 2010
    Posts: 894
    Default

    I have a king sized flannel quilt that I made prior to washing the fabric. I love it. All of the fabric is from a quilt shop. It washes beautifully, although it is heavy. When I work with flannel from JoAnn's, I wash it because the quality and thread count varies a lot. I find that flannel is very easy to work with. It doesn't slip or slide. It kind of sticks to the other pieces of flannel. I don't understand your concern about pinning.
    momsbusy is offline  
    Old 11-03-2017, 07:38 AM
      #10  
    Senior Member
     
    Join Date: Nov 2010
    Posts: 894
    Default

    I forgot to mention that my much loved flannel quilt has a large stipple over the entire quilt.
    momsbusy is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Holice
    Main
    12
    09-05-2013 09:33 PM
    AnnaF
    Pictures
    113
    01-30-2012 05:08 PM
    Iamquilter
    Pictures
    3
    11-17-2011 05:49 PM
    armaynes
    Main
    27
    12-13-2009 10:28 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter