FMQ vs. Stitch in the Ditch
08-13-2016, 10:09 AM
#1
Super Member
Thread Starter
Join Date: Aug 2013
Location: Sunny Florida, USA
Posts: 1,047
FMQ vs. Stitch in the Ditch
When you do an overall design in FMQ, do you still stitch in the ditch on the quilt? Sometimes I find that when I stitch in the ditch, the design is distorted somewhat even using the even feed foot. Thanks for your responses.
08-13-2016, 10:32 AM
#2
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,481
If the quilt is blocks with sashing, I usually SITD the sashing first to keep it straight, I then do FMQ in the blocks and on the sashing. If however I plan to do an all over pattern, I do not SITD. FMQ will distort the top some especially if you are doing a lot of stitching on the fabric bias.
08-13-2016, 01:05 PM
#5
Super Member
Join Date: May 2013
Location: Ballwin, MO
Posts: 4,230
I haven't done SITD when using an allover design. It seems like it would ruin the effect of the allover FMQ design on the quilt back.
08-13-2016, 01:11 PM
#6
Super Member
Join Date: Oct 2010
Location: Nebraska
Posts: 3,253
I usually STID at least a couple of rows the length and width of the quilt before I do an all over design. On some quilts I've done STID around all blocks before FMQ. Since I do my quilting on my DSM I want to be sure it is stable since it can take a fair amount of pushing, pulling and re-adjusting with a larger quilt. I do pin basting and so far so good
08-13-2016, 01:51 PM
#8
Senior Member
Join Date: Oct 2012
Location: Minneapolis, Minnesota
Posts: 988
I never stitch-in-the-ditch before I do an all over pattern. However, I glue baste, and nothing ever shifts because the Elmer's School Glue holds it firmly, no matter how much twisting and pulling I do. If I had to pin baste, I don't think I would ever do FMQ. Glue basting is the best idea I've ever borrowed.
08-13-2016, 04:12 PM
#9
Super Member
Join Date: Nov 2010
Location: Milton DE
Posts: 3,189
I never stitch-in-the-ditch before I do an all over pattern. However, I glue baste, and nothing ever shifts because the Elmer's School Glue holds it firmly, no matter how much twisting and pulling I do. If I had to pin baste, I don't think I would ever do FMQ. Glue basting is the best idea I've ever borrowed.
08-13-2016, 06:23 PM
#10
Super Member
Join Date: Jul 2014
Location: Illinois
Posts: 2,140
The purpose of SID is to prevent any distortion. SID is a type of foundation quilting that should prevent your quilt from shifting while you FMQ. If your fabric is shifting & getting distorted from the SID, see if you can adjust the tension on your presser foot to lessen it. Also, with high loft batting (not sure if that's what you're using), certain feet can drag on the fabric. I have to use an open toe with my walking foot (I don't have even feed) because the other 2 options drag too much (one is a regular-type foot, the other is a ditch guide foot).
If you are referring to the thread overlapping your design, I use water soluble thread for my SID work so that I get the advantage of the foundation without creating a permanent interruption in my chose FMQ design.
If you are referring to the thread overlapping your design, I use water soluble thread for my SID work so that I get the advantage of the foundation without creating a permanent interruption in my chose FMQ design.
Thread
Thread Starter
Forum
Replies
Last Post
AngelinaMaria
Main
26
12-06-2012 12:02 PM
