Go Back  Quiltingboard Forums >
  • Main
  • Pinmoors or not >
  • Pinmoors or not

  • Pinmoors or not

    Thread Tools
     
    Old 03-22-2016, 07:30 AM
      #11  
    Member
     
    Join Date: Jan 2014
    Location: suburbs of Dallas, TX
    Posts: 64
    Default

    I bought some Pinmoors, but found that I didn't care for them. I bought the Kwik Klip tool for closing safety pins and like it much better.
    colorfulom is offline  
    Old 03-22-2016, 08:44 AM
      #12  
    Super Member
     
    EasyPeezy's Avatar
     
    Join Date: Mar 2010
    Location: Canada
    Posts: 3,458
    Default

    Originally Posted by Chasing Hawk
    A can of quilt basting spray runs about 12 dollars. A gallon of Elmer's washable glue is around 17 dollars last time I bought it. I made my own Pinmoors out of those foam ear plugs I cut each one into 3 pieces. I used them for a while before discovering the joys of glue basting.
    And you can baste tons of quilts with a gallon of Elmer's. I bought a litre because
    that's all they had here and I basted several quilts and I still have lots left. I pour some in the 4oz container and have more than enough to baste a large quilt. The
    glue is diluted to where I like it...not too liquid and not too thick. In other words,
    a little goes a long way.
    EasyPeezy is offline  
    Old 03-22-2016, 10:02 AM
      #13  
    Super Member
     
    Join Date: Dec 2010
    Location: Chula Vista CA
    Posts: 7,364
    Default

    For basting I prefer the spray adhesive, when matching seams my choice is the washable stick glue and the Clover clips, but sometime I need to use the straight pins and that is when I use the Pinmoors. (I got just one package of them, it was enough.) Once in a while I will use safety pins to baste a quilt, but prefer not to do that.
    quiltingcandy is offline  
    Old 03-22-2016, 11:39 AM
      #14  
    Super Member
     
    AliKat's Avatar
     
    Join Date: Apr 2007
    Location: Phoenix, AZ
    Posts: 2,943
    Default

    I've been told it is cheaper and just as good to buy a quantity of ear plugs.
    I'm not into pinning.
    AliKat is offline  
    Old 03-22-2016, 03:24 PM
      #15  
    Power Poster
     
    Join Date: Jan 2011
    Location: Southern USA
    Posts: 16,074
    Default

    Originally Posted by AliKat
    I've been told it is cheaper and just as good to buy a quantity of ear plugs.
    I'm not into pinning.
    Cheaper but not as good. The pinmoors are made with high quality silicone, self healing. The same as baby pacifiers are made from. A pacifier is not inexpensive, about $4, $15 for a Wubanub, in case you haven't bought one recently. The pin glides into it with no pushing and stays put. You have to use a good quality sharp thin pin. I use to use earring backs before using the pinmoors.
    Onebyone is offline  
    Old 03-22-2016, 05:26 PM
      #16  
    Super Member
    Thread Starter
     
    Join Date: Jun 2009
    Location: Bluebell
    Posts: 4,291
    Default

    thanks for the information everyone. I learned a lot and I think I will continue using what I have.
    deedum is offline  
    Old 03-22-2016, 05:27 PM
      #17  
    Super Member
    Thread Starter
     
    Join Date: Jun 2009
    Location: Bluebell
    Posts: 4,291
    Default

    thanks for the response. I think I might look at the Kwik Klip tool now
    deedum is offline  
    Old 03-22-2016, 05:32 PM
      #18  
    Super Member
    Thread Starter
     
    Join Date: Jun 2009
    Location: Bluebell
    Posts: 4,291
    Default

    Originally Posted by Jingle
    I only use large safety pins. They work for me. Seems anything else I use doesn't work for me like it does for others.
    I have decided to stick with the tried and true.
    I think after reading all the responses, I agree with you.
    deedum is offline  
    Old 03-22-2016, 10:34 PM
      #19  
    Super Member
     
    Join Date: Jun 2010
    Location: England Alton Towers
    Posts: 6,673
    Default

    A pinmoors are small plastic roll which go on the end of straight pins. I have used them with some success I have also cut my own from earplugs again they were successful. I found it quicker to use the bent safety pins than put pinmoors on so kept to quickest. I have also spray glued with good success rate. It was the elmers glue I had no success with as it created lage blobs which although it washed out the quilting wasn't as smooth as I would have liked.
    DOTTYMO is offline  
    Old 03-23-2016, 04:42 AM
      #20  
    Super Member
     
    weezie's Avatar
     
    Join Date: Dec 2007
    Location: Douglas County, GA
    Posts: 1,722
    Default

    I use pinmoors only for small spaces, such as a practice block or quilting one block at a time once I've secured a large quilt with SID. I've tried all kinds of basting of large quilts and always come back to the quilter small safety pins, for a variety of reasons. I can tell you that the Kwik Klip is one of my best sewing room investments ... I did without one for years and just used my fingers. Soooo much better with the tool.

    Last edited by weezie; 03-23-2016 at 04:45 AM.
    weezie is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    EagarBeez
    Main
    14
    03-15-2011 07:33 AM
    MarthaVA
    Links and Resources
    19
    02-15-2011 06:07 PM
    Raggiemom
    Main
    12
    01-19-2011 12:41 PM
    AlwaysQuilting
    Main
    29
    01-03-2011 09:05 AM
    BellaBoo
    Links and Resources
    16
    09-25-2010 08:44 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter