Please Help with a simple question about a Bernina
#1
Junior Member
Thread Starter
Join Date: Jan 2010
Location: Prosper, Texas
Posts: 157
Please Help with a simple question about a Bernina
I have a Bernina 640 Artista & I am hoping someone that also has one can tell me. Is this normal? The lever used to raise and lower the sewing foot wiggles from side to side. It only moves about 3/8 inch back and forth & doesn't seem to be causing any trouble. It sews fine and raises the foot up and down fine but I'm afraid to keep sewing for concern that if something is working its way loose inside it may cause more trouble to ignore it. I also don't want to make the 100 mile round trip to my dealer only to have him tell me that it is normal for it to wiggle like that. Maybe it it normal & has always been loose like that & I just never noticed? I'm hoping someone on here can tell me cause I really don't have the time (much less the gas) to drag my "Bea" all that way if not needed.
Thank you in advance for any help you can give me.
Thank you in advance for any help you can give me.
#4
Junior Member
Thread Starter
Join Date: Jan 2010
Location: Prosper, Texas
Posts: 157
Thank you guys for your help. I think I will have to take it in based on the fact that yours Joset doesn't move. I will call first Marilyn just in case he can give me a way to fix it without bringing it in. Thanks again.
#6
Super Member
Join Date: Aug 2010
Location: North Central, NC
Posts: 2,741
Quilting D, I have a Bernina 153 QE and I just checked the lever. It wiggles!!! Whether it is in the up position or the down position, it wiggles back and forth (horizontally) a bit. If you ever find out if this is normal or not, please post your findings so the rest of us (or at least me) will know.
PS: I just checked my older Pfaff too and it's lever wiggles also! Maybe I am too rough when putting the lever up and down? Hmmmmmmm.
PS: I just checked my older Pfaff too and it's lever wiggles also! Maybe I am too rough when putting the lever up and down? Hmmmmmmm.
#7
Senior Member
Join Date: Jan 2013
Posts: 333
I have an Artista 730e and an old 930. Both of them wiggle slightly. I have my machines serviced yearly. I have my Mom's Memory Craft 6500 pro and two smaller Janomes I take to sewing ministry and all of them wiggle. The Memory Craft wiggles a full inch. I think it is normal.
#8
Moderator
Join Date: Jun 2008
Location: Camarillo, California
Posts: 35,242
I have a 630 and I can wiggle my lever from side to side a little. It does not wiggle up or down at all but can side to side.
__________________
My newest Grandson, Caleb Austin, was born May 29th. I am now Grandma to 4 precious babies. I am so blessed!!!!
My newest Grandson, Caleb Austin, was born May 29th. I am now Grandma to 4 precious babies. I am so blessed!!!!
#9
Are you talking about the lever attached to the machine behind the needle or are you talking about the knee lift lever? I have the Artista and the lever on the machine is tight, however the knee lift wiggles as you describe and it drives me mad, because eventually it wiggles itself out and falls on the floor. I didn't even think there might be a fix for it.
Thread
Thread Starter
Forum
Replies
Last Post