Go Back  Quiltingboard Forums >
  • Main
  • starch method of applique >
  • starch method of applique

  • starch method of applique

    Thread Tools
     
    Old 10-22-2013, 09:40 AM
      #1  
    Junior Member
    Thread Starter
     
    Join Date: May 2011
    Location: Snelleville,Ga
    Posts: 176
    Default starch method of applique

    what is the starch method of applique? I have never heard of this term before. It sounds interesting as my next project is applique.
    donnai is offline  
    Old 10-22-2013, 10:00 AM
      #2  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    I'm sure others will describe it better, and there are undoubtedly other ways of doing it too. This is the way I tried out the technique.

    Basically you cut a template out of heat-resistant plastic, cut the fabric larger than the template and clip any inner curves, place the fabric under the template on a piece of aluminum foil, use a small paintbrush to saturate the edges of the fabric, fold up the aluminum foil around the edges, then iron on top of the foil on both sides and allow to dry thoroughly. Can re-use template and foil.

    This was an extremely slow and tedious method of applique for me, so I only tested it out and then went back to my usual freezer paper method of doing machine applique. This is the method Harriet Hargrave explains in her books, although I prefer to use paper paste instead of glue sticks.
    Prism99 is offline  
    Old 10-22-2013, 10:05 AM
      #3  
    Super Member
     
    Join Date: Oct 2011
    Location: Missouri
    Posts: 4,061
    Default

    Lynn, the Alamosa Quilter, has a tutorial on her blog:
    http://alamosaquilter.blogspot.com/2...que-photo.html

    I haven't done this yet ..... let us know how it goes if you use her tutorial.
    MaryMo is offline  
    Old 10-22-2013, 10:08 AM
      #4  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    I tried something similar to the method in the linked tutorial too. The problem I had with that method was always burning my fingers! I'm fairly clumsy, so others with better coordination may fare better than I did.

    Last edited by Prism99; 10-22-2013 at 10:10 AM.
    Prism99 is offline  
    Old 10-22-2013, 10:08 AM
      #5  
    Junior Member
    Thread Starter
     
    Join Date: May 2011
    Location: Snelleville,Ga
    Posts: 176
    Default

    thank you, not sure I will use that method
    donnai is offline  
    Old 10-22-2013, 10:26 AM
      #6  
    Power Poster
     
    dunster's Avatar
     
    Join Date: Mar 2009
    Location: Lake Elsinore, CA
    Posts: 15,163
    Default

    This article also shows some ways to use starch in turned edge applique. http://www.connectingthreads.com/tut...Prep__D48.html As with most things in quilting, there's more than one way to skin a cat.
    dunster is offline  
    Old 10-22-2013, 10:35 AM
      #7  
    Senior Member
     
    quiltin-nannie's Avatar
     
    Join Date: Jan 2013
    Location: NW PA
    Posts: 843
    Default

    Originally Posted by Prism99
    I'm sure others will describe it better, and there are undoubtedly other ways of doing it too. This is the way I tried out the technique.

    Basically you cut a template out of heat-resistant plastic, cut the fabric larger than the template and clip any inner curves, place the fabric under the template on a piece of aluminum foil, use a small paintbrush to saturate the edges of the fabric, fold up the aluminum foil around the edges, then iron on top of the foil on both sides and allow to dry thoroughly. Can re-use template and foil.

    This was an extremely slow and tedious method of applique for me, so I only tested it out and then went back to my usual freezer paper method of doing machine applique. This is the method Harriet Hargrave explains in her books, although I prefer to use paper paste instead of glue sticks.
    This how I do it, but don't use the foil. After you do it awhile, you learn how not to burn your fingers!
    quiltin-nannie is offline  
    Old 10-22-2013, 10:49 AM
      #8  
    Super Member
     
    Join Date: May 2011
    Location: Pacific NW
    Posts: 9,444
    Default

    Originally Posted by Prism99
    Basically you cut a template out of heat-resistant plastic, cut the fabric larger than the template and clip any inner curves, place the fabric under the template on a piece of aluminum foil, use a small paintbrush to saturate the edges of the fabric, fold up the aluminum foil around the edges, then iron on top of the foil on both sides and allow to dry thoroughly. Can re-use template and foil.
    This is sort of how I do it, too, although not with the foil. I'm not sure what the reason is for using foil...?

    Here is a very clearly illustrated and well-written step-by-step demonstration. I basically learned how to prepare my appliques from this post.

    http://erinrussek.typepad.com/one-pi...ng-shapes.html
    Peckish is offline  
    Old 10-22-2013, 10:49 AM
      #9  
    Power Poster
     
    QuiltnNan's Avatar
     
    Join Date: Mar 2011
    Location: western NY formerly MN, FL, NC, SC
    Posts: 51,430
    Default

    when doing my dear jane blocks, there are many small melons required. i cut freezer paper melons and iron them to the fabric, cut them allowing a scant 1/4" seam allowance. then i paint the edges with half staflo and half water mixture. then i iron the starch dry and remove the freezer paper. now they are ready to applique to the background. to me, it works great.
    QuiltnNan is offline  
    Old 10-22-2013, 12:25 PM
      #10  
    Super Member
     
    woody's Avatar
     
    Join Date: Aug 2009
    Location: Canberra, Australia
    Posts: 2,135
    Default

    Originally Posted by MaryMo
    Lynn, the Alamosa Quilter, has a tutorial on her blog:
    http://alamosaquilter.blogspot.com/2...que-photo.html

    I haven't done this yet ..... let us know how it goes if you use her tutorial.
    I have been using this method for my Affairs of the Heart Quilt. Although it takes some time, I found it great. I use a clover mini iron, otherwise I burn my fingers I have used only Batiks in my quilt so I haven't found the need to clip my curves, they sit nicely. Also if your pattern has a lot of circles I highly recommend getting a set of Perfect Circles http://www.connectingthreads.com/too...y__d81770.html as I could never cut a perfect circle.
    I stitch down my applique with silk thread which just disappears into the fabric and is lovely to use.
    woody is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    RJLinkletter
    Main
    19
    02-26-2019 01:48 AM
    slbram17
    Links and Resources
    6
    08-03-2016 05:22 AM
    Jackietellijohn60
    Main
    12
    04-28-2013 08:43 AM
    Threadbanger
    Main
    11
    02-02-2012 01:06 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter