Thread Cutter
07-27-2011, 02:20 PM
#1
Super Member
Thread Starter
Join Date: Oct 2008
Location: Van. Island, BC
Posts: 1,420
Anyone mess with or replace the thread cutter on your sewing machine. My now always cuts the bobbin threadonly. Once in a while it will also cut both threads if I very slowly push the button. Ant ideas. I'm getting ready to go in. LOL.
07-27-2011, 02:24 PM
#4
Senior Member
Join Date: Aug 2009
Location: Some place where the wheat grows.
Posts: 996
Originally Posted by true4uca
Anyone mess with or replace the thread cutter on your sewing machine. My now always cuts the bobbin threadonly. Once in a while it will also cut both threads if I very slowly push the button. Ant ideas. I'm getting ready to go in. LOL.
07-27-2011, 02:32 PM
#6
Super Member
Join Date: Jul 2010
Posts: 2,500
I have never had any problem with either my Janome or Babylock auto thread cutters. As to the needle threader on the Janome, I bought the part and installed it on myself when I broke it by insisting that it would thread a #60 needle - guess what? - it wouldn't!
If your machine is under warranty, the thread cutter should be covered under it.
If your machine is under warranty, the thread cutter should be covered under it.
07-27-2011, 02:41 PM
#7
Senior Member
Join Date: Feb 2008
Location: Bakersfield, CA
Posts: 333
I used only my thread cutter (never scissors) for over a year on my Babylock. (And I sew almost everyday.) It's still working fine, and the machine is over 6 years old.
The only time it didn't is when I was in a hurry and moved the fabric before it's finshed swiping the thread.
The only time it didn't is when I was in a hurry and moved the fabric before it's finshed swiping the thread.
07-27-2011, 02:51 PM
#9
Super Member
Thread Starter
Join Date: Oct 2008
Location: Van. Island, BC
Posts: 1,420
My Brother is 5 yrs. old, so no warranty. This started about 4 months ago. Now I'm doing some STD with a lot of stopping & starting. The thread cutter would be so helpful right now. I'm really thinking I need a new machine. Any suggestions for an affordable machine. My must haves--larger throat space, auto threader & auto thread cutter. Oh and needle in right place for 1/4 inch.
07-27-2011, 02:53 PM
#10
Super Member
Join Date: Jul 2010
Location: Canon City, Colorado
Posts: 2,419
My Babylock only has the thread cutter,but i haven't used it that long.I have had my Pfaff over 20 years and I'm still using the same needle threader.You might check that little hook that goes in the needle,it might be bent.
If your thread cutter cuts slow i would think it would cut the thread fast.But maybe it's missing the mark inside going fast.To bad you can't see inside when you are pushing the button.Just one more thing to go wrong with these machines.Connie in CO
If your thread cutter cuts slow i would think it would cut the thread fast.But maybe it's missing the mark inside going fast.To bad you can't see inside when you are pushing the button.Just one more thing to go wrong with these machines.Connie in CO
Thread
Thread Starter
Forum
Replies
Last Post
