Maureen NJ

I have a Bernina 830 and when I use the embroidery module, it keeps showing I have a problem with the bobbin. Actually, the bobbin is fine as is the embroidery work. No thread buildup. I push the button and resume stitching until the next time. It happened about 40-50 times in a 4x4 embroidery piece. It is so frustrating. I have had the Bernina 830 for almost 5 years and the first year or so, I had constant thread breakage. I must have taken it into the dealer 10 times. Finally, they changed the hook and that resolved, for the most part, the thread breakage but this problem with the bobbin has never been resolved. It happens sometimes when quilting but not often. I clean the bobbin area frequently so it is not that. Any help would be appreciated. I am taking it soon to my dealer. Cost for servicing is $175! I keep wondering if it should be sent back to Bernina for their servicing. I did not use the machine much in the past as it was so frustrating but now I am retired and sewing and quilting a lot. I would like to use the embroidery part of the machine as I have a lot invested in it to have it just sit. Please offer any suggestions. I would really appreciate it!

DOTTYMO

I should send a message to bernina with a list of all the times it has gone in for repairs and try to add up how much you have spent on them. Don't send in again until they reply.
Sounds like a Friday machine with many faults which they would not like other to hear about. My bernina and my friends are all fantastic.

Tartan

​Sounds like a lemon. I would contact the company not the dealer.

Zinda

I have a 200e Bernina that did the same thing. Several trips back to the dealer. Several circuit boards - problems. I finally gave up and went with an 830. I made the mistake of not contacting Bernina directly, always went through the dealer. I would highly recommend contacting Bernina directly. At least you'd have peace of mind that someone other than the deal might address the problems. By the way, I recently heard that Bernina's don't usually like variegated thread and you might have a high incident of thread breakage. The correct needle made a huge difference, too. I was changing needles, but putting the same type in.

Doggramma

I have an 820 and was having problems with the bobbin. It kept showing a problem. I switched to a different bobbin, one where the silver marks were newer. My machine didn't like the more rubbed off marks. Could it possibly be that? (I'm sure you've probably tried that, but just thought I'd mention it)

ManiacQuilter2

I had problem with another Bernina model and went directly to Bernina of America. They were able to resolve the problem quickly. Good Luck !!

sandyfullmer

Try a new bobbin. The machine reads those little silver marks and if they are worn in places it causes the problem you are having. Found that out with my 820.

QuiltE

Agree ... if it wears out ... you need to replace the bobbins.
There is nothing wrong with your machine ... in fact, it is your machine (and the sensors) doing the job they are meant to do.



About the variegated thread comment .... I've run miles of it thru my 820, with no problems.

I don't think you could categorize a machine as not liking variegated threads ... whereas less success with a specific type/brand (variegated or plain) might be more realistic.

Nammie to 7

Be sure you are using the correct bobbin thread and the correct top thread. My 830 is very particular about the thread I use. If I feed him correctly he works just fine. It was interesting to hear about the silver marks and bobbin issues. I will file that information away! Thanks for that hint!

quiltedsunshine

You can go into your service panel and turn off the thread sensor. If it's going off that much, and the stitching is looking alright, why not?