kenmore 158904
#1
Member
Thread Starter
Join Date: Jun 2010
Posts: 76
kenmore 158904
new to me probably paid too much. all cleaned up and lubed worked when gave it little test drive before purchase then sewed for more than a few and smoke O NO unplug check it out motor hot but is it possible that it is too tight for the belt?
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
Yes, it is possible the belt is too tight. It needs to be just tight enough to not slip, no more. At that point it will seem to be way loose, but it's not.
The motor could also be dirty inside, or have been oiled too much.
Check the belt tension, then run the machine again.
Joe
The motor could also be dirty inside, or have been oiled too much.
Check the belt tension, then run the machine again.
Joe
#4
Super Member
Join Date: Feb 2012
Posts: 8,091
beauford,
Does this machine have a V belt on it or a rubber band belt? Rubber band belts are bad for stretching then needing to be tightened. I've removed some that have burned, some that have left much deposits on the pulleys and some that have gummed up on the pulleys.
If your machine has a rubber band belt get rid of it and put a proper V belt on. It will make a heck of difference.
Also clean the hand wheel and motor pulley grove to remove any old belt residue. That will help prevent slipping.
Joe
Does this machine have a V belt on it or a rubber band belt? Rubber band belts are bad for stretching then needing to be tightened. I've removed some that have burned, some that have left much deposits on the pulleys and some that have gummed up on the pulleys.
If your machine has a rubber band belt get rid of it and put a proper V belt on. It will make a heck of difference.
Also clean the hand wheel and motor pulley grove to remove any old belt residue. That will help prevent slipping.
Joe
#5
Getting off the subject here, J Miller, but it is great to see you back visiting/helping us. I have been in Texas teaching a bunch of Gen Xers to sew and quilt, today is only my second day back reading and catching up on what's going on in the quilting world....
Thread
Thread Starter
Forum
Replies
Last Post