Kenmroe 120-491

Old 10-03-2021, 12:28 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Apr 2020
Location: South of St Louis
Posts: 438
Default Kenmroe 120-491

I was given this machine a couple of weeks ago, and is it an odd one. There is a detailed thread on it over here

https://www.quiltingboard.com/vintag...e-t189987.html

So I won't add extra pictures, but the other thread is worth a look. The drive wheel had the worst flat spot I've ever seen, I should have taken a picture of it, and with the case the way it is covering the motor there's no way to lift the drive wheel off the hand wheel when not in use. I cut off the old one and covered it with a rubber tube, it works OK. It came with the dreaded (to me) CC1221 needle in place, which are very difficult to find. It also came with a couple of 15x1 needles loose in the table. Based on the needle eye/hook timing the CC1221 looked to be the proper needle, but I tried the 15x1 anyway, and it sewed just fine, in fact the stitches looked a little better than with the CC1221, so I've left the 15x1 in place.

It is noisy noisy noisy, and now I have to find some chain lube for my maintenance items!!
Attached Thumbnails 20211003_145139.jpg   20211003_145507.jpg  
JoeJr is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter


SEO by vBSEO ©2011, Crawlability, Inc.