Left Homing Needle Position
#1
Super Member
Thread Starter
Join Date: Aug 2010
Location: Kansas City, Missouri
Posts: 1,040
Left Homing Needle Position
I have some left homing needle position machines. At first I didn't like them much but I have come to tolerate them. However, I still always seem to prefer to use the center needle. I was just wondering what was the reasoning behind the left homing needle position? The machines I have are White and Brother so did Singer ever make a left homing needle position machine?
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
I have no idea what their line of reason was to make a left homing machine.
Unless it was to make it easier to manufacture. The left homers seem to be a simple spring loaded system to pull the needle to the left unless it's moved to the ZZ position. But, I do have one that is a left homer when the straight stitch needle plate is installed, and can also be set to center position homing when the ZZ plate is installed.
I don't "think" Singer ever made a left homing machine. I've never seen or read of one or heard of anyone mentioning one.
Joe
Unless it was to make it easier to manufacture. The left homers seem to be a simple spring loaded system to pull the needle to the left unless it's moved to the ZZ position. But, I do have one that is a left homer when the straight stitch needle plate is installed, and can also be set to center position homing when the ZZ plate is installed.
I don't "think" Singer ever made a left homing machine. I've never seen or read of one or heard of anyone mentioning one.
Joe
#3
I am not a fan of left homing machines. No idea why they would make them like that unless it was easier or cheaper to do it that way. I had one here but it drove me crazy from the start, so I sold it. I haven't seen one in any of my Singers.
#5
Senior Member
Join Date: Apr 2012
Location: Illinois...near St. Louis
Posts: 392
I had a Kenmore from the 90's that DIDN'T come with a straight stitch plate but DID have L,C,& R needle positions. The manual said to use the left needle position for straight stitching on light weight knits, silky fabrics....any fabric that might have "flagging" issues. Since you were only using the far left side of the zigzag plate, there was more support under your fabric. So maybe there was a reason other than cost. I've always heard they were cheaper to manufacture, too......
#7
Senior Member
Join Date: Apr 2012
Location: Illinois...near St. Louis
Posts: 392
Flagging is when the fabric pushes down into the hole in the needle plate causing skipped stitches. Either because it's clinging to the needle like knits w/lycra will do. Or because it's very thin, lightweight like a lot of silky type fabrics, chiffon, etc.
So, according to the manual, using the far left side of your all-purpose/zigzag foot and the far left side of the plate the fabric has more support....can't pull up with the needle or push down into the hole as easily. Closer to the effect you'd get with a straight stitch foot & straight stitch needle plate.
So, according to the manual, using the far left side of your all-purpose/zigzag foot and the far left side of the plate the fabric has more support....can't pull up with the needle or push down into the hole as easily. Closer to the effect you'd get with a straight stitch foot & straight stitch needle plate.
#8
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
It wasn't necessarily a cheaper way but was supposed to be a simpler way in the mechanics of zig zag. It's been explained to me but my brain just fogged up because I didn't really understand what was being said.
Cari
Cari
#9
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Many times they only came with the zig zag plate, so they were cheaper to manufacture.
#10
Super Member
Join Date: Feb 2012
Posts: 8,091
Flagging is when the fabric pushes down into the hole in the needle plate causing skipped stitches. Either because it's clinging to the needle like knits w/lycra will do. Or because it's very thin, lightweight like a lot of silky type fabrics, chiffon, etc.
So, according to the manual, using the far left side of your all-purpose/zigzag foot and the far left side of the plate the fabric has more support....can't pull up with the needle or push down into the hole as easily. Closer to the effect you'd get with a straight stitch foot & straight stitch needle plate.
So, according to the manual, using the far left side of your all-purpose/zigzag foot and the far left side of the plate the fabric has more support....can't pull up with the needle or push down into the hole as easily. Closer to the effect you'd get with a straight stitch foot & straight stitch needle plate.
Thanks. That makes sense to me.
Joe
Thread
Thread Starter
Forum
Replies
Last Post
quilt938
For Vintage & Antique Machine Enthusiasts
28
08-01-2019 07:22 PM
quiltedsunshine
For Vintage & Antique Machine Enthusiasts
9
12-26-2015 06:06 PM