Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   For Vintage & Antique Machine Enthusiasts (https://www.quiltingboard.com/vintage-antique-machine-enthusiasts-f22/)
-   -   Vintage Sewing Machine Shop.....Come on in and sit a spell (https://www.quiltingboard.com/vintage-antique-machine-enthusiasts-f22/vintage-sewing-machine-shop-come-sit-spell-t43881.html)

vintagemotif 12-21-2011 08:48 AM


Originally Posted by Phyllis nm (Post 4799034)
I only use 505 spray or maderia basting with no problems.

This was the June Taylor spray that I picked up a JoAnn's. I washed the fabrics once and the batting three times after pulling them apart. There are still sections that have this spray on them. So, when they say it washes out, it doesn't. Not a good thing to use on baby quilts either. I can still smell this junk.

While hand basting last night, I noticed the areas that still had the spray on them; the needle wouldn't glide through easily.

I have used the 505 spray, but that was back before using vintage machines, and I do recall having sections of the quilting with this similar problem. Back then, I considered it to be my error. Now, I'm thinking it wasn't. I googled loops and skip stitching from spray basting and read that it has happened to others.

I have been wanting to do one quilt again that was hand quilted, been over 23 years since I hand quilted. This may be my quilt that now gets hand quilted since there are too many sections left with the spray. And I don't feel like machine quilting and then ripping out the sections that have the loops, if they do occur again.

This could be fun hand quilting it and adding some hand embroidery to the project. So, I'm starting my next year's Christmas project today...and maybe I'll get it done in time.

jljack 12-21-2011 09:10 AM


Originally Posted by Bennett (Post 4797850)
I've been playing the last few days. I didn't really mean to, but it started with trying out some Bar Keeper's Friend on the slide plates. Then I figured I needed something to polish up while watching TV, so off came all the little bits for cleaning. Then I couldn't just put her shiny jewelry in a drawer, so she had to be cleaned up. I've never used a shuttle and long bobbin before, but she sews a nice stitch and it wasn't too hard to do. It will be a while before I get her in the treadle to really try her out.

Singer 27, dated to 1898.

[ATTACH=CONFIG]296695[/ATTACH]

[ATTACH=CONFIG]296696[/ATTACH]

Very nice, Bennett!!! That Barkeepers Friend works great....I decided to try it when I was cleaning my Davis, as my hubby and I had used it on the chrome and other metal on our '62 T-Bird and it worked great. I like how it cleans without scratching anything.

jljack 12-21-2011 09:21 AM

Monica, I have really never liked the idea of spray basting...so I have never done it. I got one small quilt from another quilter to be quilted, and she had spray basted it. I had to pull it apart and rinse it out. Not all the spray stuff came out, and I ended up putting fresh batting in it. It just reinforced my decision not to use it. I of course don't need it for quilting on my short arm frame, but for free motion I won't use it.

Grannyh67 12-21-2011 09:35 AM


Originally Posted by vintagemotif (Post 4800117)
This was the June Taylor spray that I picked up a JoAnn's. I washed the fabrics once and the batting three times after pulling them apart. There are still sections that have this spray on them. So, when they say it washes out, it doesn't. Not a good thing to use on baby quilts either. I can still smell this junk.

While hand basting last night, I noticed the areas that still had the spray on them; the needle wouldn't glide through easily.

I have used the 505 spray, but that was back before using vintage machines, and I do recall having sections of the quilting with this similar problem. Back then, I considered it to be my error. Now, I'm thinking it wasn't. I googled loops and skip stitching from spray basting and read that it has happened to others.

I have been wanting to do one quilt again that was hand quilted, been over 23 years since I hand quilted. This may be my quilt that now gets hand quilted since there are too many sections left with the spray. And I don't feel like machine quilting and then ripping out the sections that have the loops, if they do occur again.

This could be fun hand quilting it and adding some hand embroidery to the project. So, I'm starting my next year's Christmas project today...and maybe I'll get it done in time.

I use it on occasion for my machine embroidery and I don't like it at all. I don't hink I would ever use it to Quilt. I think it messes up your machine.

vintagemotif 12-21-2011 09:37 AM


Originally Posted by jljack (Post 4800193)
Monica, I have really never liked the idea of spray basting...so I have never done it. I got one small quilt from another quilter to be quilted, and she had spray basted it. I had to pull it apart and rinse it out. Not all the spray stuff came out, and I ended up putting fresh batting in it. It just reinforced my decision not to use it. I of course don't need it for quilting on my short arm frame, but for free motion I won't use it.

I thought it would wash out since they state it does, but it doesn't. There are sections still tacky...what a mess.
I hate to throw away the batting since I'm into recycling; so, I'll work with it. Hopefully this smell goes away soon.
My husband thinks that in a couple of days the glue will dry and the smell will dissipate.

I doubt this stuff is healthy...and it should never be used on a baby quilt...I'm still coughing from this junk.
It's hand basting or pin basting from here on.

Quilter7x 12-21-2011 10:06 AM


Originally Posted by jljack (Post 4800193)
Monica, I have really never liked the idea of spray basting...so I have never done it. I got one small quilt from another quilter to be quilted, and she had spray basted it. I had to pull it apart and rinse it out. Not all the spray stuff came out, and I ended up putting fresh batting in it. It just reinforced my decision not to use it. I of course don't need it for quilting on my short arm frame, but for free motion I won't use it.

I like the 505 spray, but not any of the other brands. I have never had a problem with 505 spray but have heard lots of problems with other brand sprays, especially the June Tailor brand.

I hope everyone at least tries the 505 spray for a small project. There is a difference and this is a great spray baste.

miriam 12-21-2011 10:28 AM


Originally Posted by vintagemotif (Post 4800117)
This was the June Taylor spray that I picked up a JoAnn's. I washed the fabrics once and the batting three times after pulling them apart. There are still sections that have this spray on them. So, when they say it washes out, it doesn't. Not a good thing to use on baby quilts either. I can still smell this junk.

While hand basting last night, I noticed the areas that still had the spray on them; the needle wouldn't glide through easily.

I have used the 505 spray, but that was back before using vintage machines, and I do recall having sections of the quilting with this similar problem. Back then, I considered it to be my error. Now, I'm thinking it wasn't. I googled loops and skip stitching from spray basting and read that it has happened to others.

I have been wanting to do one quilt again that was hand quilted, been over 23 years since I hand quilted. This may be my quilt that now gets hand quilted since there are too many sections left with the spray. And I don't feel like machine quilting and then ripping out the sections that have the loops, if they do occur again.

This could be fun hand quilting it and adding some hand embroidery to the project. So, I'm starting my next year's Christmas project today...and maybe I'll get it done in time.

Use a fluffy batting and just tie the quilt

vintagemotif 12-21-2011 11:14 AM


Originally Posted by miriam (Post 4800341)
Use a fluffy batting and just tie the quilt

Miriam, Too Cute!

I'm researching hand quilting, crazy quilts, and embroidery work on quilts. I'm noticing numerous folks are doing combinations of machine and hand quilting, and most of the projects are nicely done.

Quilter7x 12-21-2011 11:20 AM

Really? I like the idea of combining hand and machine quilting but didn't think anyone did it. I always thought it needed to be one or the other. Nice!

vintagemotif 12-21-2011 11:31 AM


Originally Posted by Quilter7x (Post 4800459)
Really? I like the idea of combining hand and machine quilting but didn't think anyone did it. I always thought it needed to be one or the other. Nice!

Yes, Seems the modern quilters and some younger quilters are doing this technique. Anything goes! I'm studying and telling myself to think outside the box. This quilt will have to be all hand quilted, but the next one I make will have to be done with a combination.


All times are GMT -8. The time now is 12:54 PM.