|
Donja just love these old girls. My Sarah, 1941 15-30, started making a noise when I first stepped on the gas. Whizzrrr as if the belt was slipping. Well, new belt when I get a little cash. Except some thread accidently wound around the small wheel. And the noise stopped. Guess the thread helps the old belt get traction. They even repair themselves.
|
Originally Posted by redmadder
(Post 4873699)
Donja just love these old girls. My Sarah, 1941 15-30. . . They even repair themselves.
|
Originally Posted by sew wishful
(Post 4871564)
I've been working on the New Home and can not get it to sew well. I have the tension fixed (it was bent),have it now threaded right, and it sewed a couple inches well, then I began messing with the stitch length setting, and now it isn't sewing at all....gobs of thread on the under side, thread breaking...GRRRRR!!!! I have to quit for awhile. :(
Nancy |
Randa,
Thread gobs on the underside are almost always due to a tension problem before the needle. After threading the needle pull on the thread as it exits the needle. You should see the needle deflect slightly in the direction that you are pulling. Try this and get back to us. Cathy |
Quote Originally Posted by miriam View Post
I just had to do that on 2 machines and my 319 needs it. There is a set screw somewhere - I don't have a 301 but it is likely to the right in the body of the head. You can turn loose and then move the tension. I found helpful info here - nice to have expert help to refer to.... http://www.tfsr.org/publications/tec...achine_manual/ then look at tension mechanism. There are only a few ways those can go... You may have info in your user's manual... http://www.ismacs.net/singer_sewing_...ine-manual.pdf but it is only the owners manual... Miriam, it has taken all this time to have the confidence to do this!! You were right. It was an easy fix but I was afraid I would mess up the stitching some how. This machine has a beautiful and perfect stitch. It still does after I made the adjustment. Thank you so very much! |
Originally Posted by BoJangles
(Post 4875110)
Randa, I'd say you need to 'mess with the stitch length setting' again and get it back to where you were when it was stitching! Remember, all the trouble I had when I started using my Davis Vertical Feed? It took me two months and I was ready to throw that machine out the window, when I finally got it right! It was the stitch regulator knob all the time, I just kept moving it ever so slightly until it finally stitched! I think Glenn went through the same thing with his Davis? I know you are working with a New Home, but don't give up. Maybe, Cathy will have some words of wisdom for you. My words of wisdom are, keep trying! You'll get it right eventually - sometimes these old machines just need some encouragement and patience!
Nancy Nancy is right on the stitch regulator, I had the same problem but after hours of messing with with the regulator I got it right. I got the regulator to work properly but now that it is stitching good about 10 to 12 per inch I leave it alone. |
Looks like my old Singer's are worth more than I thought:
http://www.ebay.com/itm/VERY-RARE-Vi...#ht_627wt_1163 |
Originally Posted by jlhmnj
(Post 4877081)
Looks like my old Singer's are worth more than I thought:
http://www.ebay.com/itm/VERY-RARE-Vi...#ht_627wt_1163 |
I may have to think about selling some of mine at this price. I did not realize I had a gold mine in Singer sewing machines.:D
|
Originally Posted by Mizkaki
(Post 4875212)
Randa,
Thread gobs on the underside are almost always due to a tension problem before the needle. After threading the needle pull on the thread as it exits the needle. You should see the needle deflect slightly in the direction that you are pulling. Try this and get back to us. Cathy |
| All times are GMT -8. The time now is 01:50 PM. |