|
Originally Posted by vintagemotif
(Post 5543302)
Miriam, It takes a lot of time to compile that information. First you have to google and hunt for what looks good, easy to follow, and then you have to spend the time linking or uploading to this site.
And if you make your own tutorial that also take a lot of time, but well worth it! It is nice to be able to share what we discover or learn to the QB. Not everyone finds the same information; so, this type of sharing can benefit many. My best suggestion is to first google and search, and then if you can't figure it out ask. One would be surprised at what one learns from googling and researching. |
Originally Posted by Jen C
(Post 5543825)
I didn't originally want the table that came with the machine. It is a big one and I am limited on sewing machine space. I only took the table because I didn't know if I would be able to get the part (shelf) that goes on the free arm.
Thank you Cathy, I will call you if I can make it your way soon! Nancy |
Originally Posted by miriam
(Post 5543951)
Yup it did take a lot of time and so does answering every little question - especially when the questions repeat on a weekly basis.
Everyone on here has the same vintage sewing machine bug - we love the old machines. Nancy |
Originally Posted by Bennett
(Post 5536268)
Didn't find much in the way of sewing stuff on my weekend in the big city, just a 66 that stayed where it was. A little too rich for my blood at the thrift store. But, I did get a picture because it was a blackside machine. Someone had stripped off the motor, and the case had been painted over or something. I did pick up a couple of queen sized bedskirts cheap (yay!) and went a little crazy at Quilter's Stash in Hurst. Nice guy taking care of the store, chatty and friendly atmosphere.
Oh...and whatever you do don't mention the people next door to them. Apparently they hate each other lol! MAJOR rivalry...i'm not a fan of their neighbor either, even though they're the local dealer for my new modern machines. |
Originally Posted by vintagemotif
(Post 5542374)
On one of my machines, I have a rubber band in the spoke wheel groove to help prevent slipping. That may work too for you.
|
Originally Posted by vintagemotif
(Post 5542374)
On one of my machines, I have a rubber band in the spoke wheel groove to help prevent slipping. That may work too for you.
Skip |
Originally Posted by Glenn
(Post 5545417)
Thanks Vintagemotif for the rubber band idea. I tried it and it works great to limit slipping. Thanks again. My two spool is almost ready to have her picture taken.
Skip |
Well, today was a banner day for sewing machines, and accessories.
First I picked up a used simple cabinet that should fit a wide base Singer such as the 401 or similar. It will need some fixing and refinishing, but that's not a problem. I got lots of glue. Second, I picked up a 15-91, allotment date of 12-29-36. It's complete but roughish, a wee bit of rust and the wiring is a disaster, but it turns freely, so it's a viable machine. I got it cheep so now I have a patient to do a potted motor rewire with. It's been rewired in the 50s with the horrid latex covered aluminum wire. Oh how I hate that crap! The bobbin case is an original Singer case with "Simanco" and the part number on the inside. Never seen one like that before. So this one will be a fun machine to play with. Third, :D :D :D :D ..... :) I got me a 66-1, allotment date of 6-12-13, with the back clamp feet. It's a red eye of course and it's missing it's slide plate ... of course, but it's free and spins easily. So I'll have it sewing tonight .... well maybe tomorrow. I've been looking for one of these to go with the set of back clamp attachments I got some time back from my LSMG. Also got a good solid machine case for free. It was wrapped around the 66-1. I'll have pics of all this later. Joe |
Originally Posted by J Miller
(Post 5545507)
Well, today was a banner day for sewing machines, and accessories.
First I picked up a used simple cabinet that should fit a wide base Singer such as the 401 or similar. It will need some fixing and refinishing, but that's not a problem. I got lots of glue. Second, I picked up a 15-91, allotment date of 12-29-36. It's complete but roughish, a wee bit of rust and the wiring is a disaster, but it turns freely, so it's a viable machine. I got it cheep so now I have a patient to do a potted motor rewire with. It's been rewired in the 50s with the horrid latex covered aluminum wire. Oh how I hate that crap! The bobbin case is an original Singer case with "Simanco" and the part number on the inside. Never seen one like that before. So this one will be a fun machine to play with. Third, :D :D :D :D ..... :) I got me a 66-1, allotment date of 6-12-13, with the back clamp feet. It's a red eye of course and it's missing it's slide plate ... of course, but it's free and spins easily. So I'll have it sewing tonight .... well maybe tomorrow. I've been looking for one of these to go with the set of back clamp attachments I got some time back from my LSMG. Also got a good solid machine case for free. It was wrapped around the 66-1. I'll have pics of all this later. Joe Skip |
So Jen you are not talking about the shelf/extension that goes over the free arm - you are talking about an actual table/cabinet? |
| All times are GMT -8. The time now is 10:14 AM. |