Originally Posted by SteveH
(Post 5701214)
Well, this has been quite a week. I just got a good review and a raise, and I got an opportunity to buy a Singer 241-12 working for $100. Timing is everything.
|
Originally Posted by jennb
(Post 5700304)
My little toy machine I picked up this weekend. I may see about doing a full restoration on this one. She appears to be in working order.
[ATTACH=CONFIG]380303[/ATTACH] Nancy |
Originally Posted by SteveH
(Post 5697078)
ok, getting the thread back on track.. (my bad)
here is a pic of my favorite desktop singer. [ATTACH=CONFIG]379909[/ATTACH] and a video https://dl.dropbox.com/u/18576541/model20electric.mp4 if the link fails let me know. it's a 15.8mb file or https://skydrive.live.com/?cid=10c9d...4&action=Share If nothing else, this one lets you download it. Nancy |
Originally Posted by purplefiend
(Post 5698857)
Hi everyone,
Sorry its been so long since I posted last, been ill with MRSA; its all cleared up now. Yippee!!! Today I finally found more bobbins for my Pfaff 60 treadle. It takes a class 15 bobbin, but it has to have a slit in the bottom of the bobbin so that the pin on the bobbin winder will engage properly. I thought that part was broken, until today I got a good look at the only bobbin that came with it. I'd been using Singer class 15 or old Bernina bobbins and they work fine to sew with, but not to wind a new bobbin. My local Pfaff dealer worked with me and gave me several bobbins to try out. Currently making Bonnie Hunter's latest mystery quilt with the Pfaff treadle, "Easy Street". No more triangle points being gobbled by the greedy Pfaff 1222E electric zig zag. SteveH, Congrats on being a Grandpa. I love the White Rotary too! treadling happily in central Texas, Sharon W. Nancy |
Originally Posted by makitmama
(Post 5698569)
please, please.
1. We are talking about the little cast metal "dogbone" looking thing that some early electrified machines use which allows the motor to swing from "in use" mode where a wheel on the motor shaft is in contact with the handwheel to "in storage" mode where it swings into the space under the arm. 2. The only one I have currently is cracked into two pieces. one half is currently "fused" to the motor side. I am PB Blaster'ing the screw that holds it. 3. Does anyone have one that is removable? a. If so can I get a series of photos of it with a ruler next to it? b. could I borrow one from someone to make a mold and at cast a resin model |
Originally Posted by BoJangles
(Post 5701535)
Steve, I don't think I have ever seen a model 20 with a motor? I have 2 of them, did you add the motor? Your model 20 needs to be posted in the TSM shop also, along with the video! So cool!
Nancy According to page 3 of the "Adjusters manual for Model 20's" it says Model 20-1 and 20-10 are hand crank, Model 20-2 is an Electric. She ALWAYS gets "oohhhh's and Ahhhh's when I hit the switch, even from other Guys. The line is invariably "Ok, so THAT is cute..." What amazed me is that fact that the original plug and cord are in incredible shape. The cord feels like fresh rubber. It feels like it came out of a time machine. The ONE negative is that it is currently using a rubber o-ring as a drive belt. I have seen an OLD photo and it looked like the original belt was a square profile. NO idea what material, I assume rubber. |
Steve,
If I'm understanding you, I have this piece on a machine. Are you coming to the TOGA on saturday? If so, you can check it out then. Cathy
Originally Posted by SteveH
(Post 5702060)
OK, So I really want to start the process to make this part, I would also really like to ask for some assistance here.
1. We are talking about the little cast metal "dogbone" looking thing that some early electrified machines use which allows the motor to swing from "in use" mode where a wheel on the motor shaft is in contact with the handwheel to "in storage" mode where it swings into the space under the arm. 2. The only one I have currently is cracked into two pieces. one half is currently "fused" to the motor side. I am PB Blaster'ing the screw that holds it. 3. Does anyone have one that is removable? a. If so can I get a series of photos of it with a ruler next to it? b. could I borrow one from someone to make a mold and at cast a resin model |
Originally Posted by Mizkaki
(Post 5702300)
Steve,
If I'm understanding you, I have this piece on a machine. Are you coming to the TOGA on saturday? If so, you can check it out then. Cathy Saturday I will be (hopefully) driving into SF to buy a Singer 241-12 and then going to my company's holiday party. |
1 Attachment(s)
Originally Posted by Mizkaki
(Post 5702300)
Steve,
If I'm understanding you, I have this piece on a machine. Are you coming to the TOGA on saturday? If so, you can check it out then. Cathy Saturday I will be (hopefully) driving into SF to buy a Singer 241-12 and then going to my company's holiday party. [ATTACH=CONFIG]380516[/ATTACH] |
Originally Posted by SteveH
(Post 5702060)
OK, So I really want to start the process to make this part, I would also really like to ask for some assistance here.
1. We are talking about the little cast metal "dogbone" looking thing that some early electrified machines use which allows the motor to swing from "in use" mode where a wheel on the motor shaft is in contact with the handwheel to "in storage" mode where it swings into the space under the arm. 2. The only one I have currently is cracked into two pieces. one half is currently "fused" to the motor side. I am PB Blaster'ing the screw that holds it. 3. Does anyone have one that is removable? a. If so can I get a series of photos of it with a ruler next to it? b. could I borrow one from someone to make a mold and at cast a resin model Jon |
All times are GMT -8. The time now is 06:24 PM. |