Replacing drive shaft gear

Old 05-13-2022, 01:32 PM
Thread Starter
Join Date: May 2022
Posts: 2
Default Replacing drive shaft gear

Hi all, Iím knew yo this site and would appreciate any advice. The slide hook drive shaft is wonít disengage from the hook drive gear in spite of the set screws being loosened, removed along with the retaining ring. What am I missing?
Iíve included a picture just in case.
thanks in advance,
LMG52 is offline  
Old 05-13-2022, 02:06 PM
Thread Starter
Join Date: May 2022
Posts: 2

Whoops, the machine is a Singer model # 6235.
LMG52 is offline  
Old 05-15-2022, 10:04 AM
Senior Member
Join Date: Apr 2020
Location: South of St Louis
Posts: 822

I would think to get that gear off you would have to remove the belt, at the right in your picture, and slide the shaft from left right which hopefully would let that gear at the left end drop out. All the gears likely have two set screws; you mentioned removing a screw on the left end gear, look for another if you removed only one.
JoeJr is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

FREE Quilting Newsletter