Vintage Sewing Machine Shop.....Come on in and sit a spell
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Maybe I will get lucky and the back of the machine picture will come up.
[ATTACH=CONFIG]373735[/ATTACH]
Cam stack moves - reader stays put.
[ATTACH=CONFIG]373735[/ATTACH]
Cam stack moves - reader stays put.
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
The under side.
[ATTACH=CONFIG]373736[/ATTACH]
[ATTACH=CONFIG]373736[/ATTACH]
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I haven't figured out everything yet - I think there maybe some more tricks to the bobbin than I have figured out. When I stitch it loops big time bobbin side of the fabric. I adjusted the tension and it feels right but still big loops. I'm thinking there maybe some thing I didn't catch on the bobbin. I'll have to get to it later.
Super Member
Join Date: Jan 2011
Location: Sierra Vista, AZ
Posts: 3,992
Ah Miriam. Your Phoenix pics posted here instead of on the Phoenix thread. Yeah, I spend too much time here. I am wondering if the Phoenix wants a very tight bobbin tension? Sort of like the Necchi Lydia I am fighting with. I have the same problem with Naughty Lydia, beautiful top stitch with big loopys and the bobbin side. She is currently in "time out" under the sewing table till I figure out how to correct her tension issues.
Wow, look at that drive belt underneath. Yep, those girls are "iron maidens" for sure.
Wow, look at that drive belt underneath. Yep, those girls are "iron maidens" for sure.
Super Member
Join Date: Feb 2012
Posts: 8,091
Miriam,
The bobbin is similar to the one on my Wilcox and Gibbs industrial lock stitch machine. It has a weird convoluted method of threading it. Is it possible you've missed a step or a hole in threading this one?
My wife says the cams should just slide over the knurled knob over the other cams. I think the knurled knob should unscrew to switch the cams. We're just guessing.
Joe
The bobbin is similar to the one on my Wilcox and Gibbs industrial lock stitch machine. It has a weird convoluted method of threading it. Is it possible you've missed a step or a hole in threading this one?
My wife says the cams should just slide over the knurled knob over the other cams. I think the knurled knob should unscrew to switch the cams. We're just guessing.
Joe
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Miriam,
The bobbin is similar to the one on my Wilcox and Gibbs industrial lock stitch machine. It has a weird convoluted method of threading it. Is it possible you've missed a step or a hole in threading this one?
My wife says the cams should just slide over the knurled knob over the other cams. I think the knurled knob should unscrew to switch the cams. We're just guessing.
Joe
The bobbin is similar to the one on my Wilcox and Gibbs industrial lock stitch machine. It has a weird convoluted method of threading it. Is it possible you've missed a step or a hole in threading this one?
My wife says the cams should just slide over the knurled knob over the other cams. I think the knurled knob should unscrew to switch the cams. We're just guessing.
Joe
As far as the bobbin goes - There is a slit - got that then it clicks in - in one of the pics there is a little loop - I'm wondering if I missed that loop.
[ATTACH=CONFIG]373744[/ATTACH]
Last edited by miriam; 10-31-2012 at 04:49 PM.
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
The bobbin area has a door that latches. Finger is on the latch. The bobbin goes in the bobbin case and thread goes through then that whole thing just sets there then close the latch. I'm sure there is more to this... I don't have a manual. The bobbin thread makes magnificent loops - wow... probably how chenille bed spreads got invented or something... another pic of the bobbin case.[ATTACH=CONFIG]373745[/ATTACH]
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
The bobbin case from the bobbin side
[ATTACH=CONFIG]373746[/ATTACH]
[ATTACH=CONFIG]373746[/ATTACH]
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
The empty bobbin case:
[ATTACH=CONFIG]373747[/ATTACH]
[ATTACH=CONFIG]373747[/ATTACH]
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
sure is one dirty bobbin area...
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM