Go Back  Quiltingboard Forums >
  • Main
  • 1/4" Foot for left needle position (Vintage Machine) question >
  • 1/4" Foot for left needle position (Vintage Machine) question

  • 1/4" Foot for left needle position (Vintage Machine) question

    Thread Tools
     
    Old 06-19-2011, 01:48 PM
      #1  
    Super Member
    Thread Starter
     
    Join Date: Jan 2010
    Location: Outer Space
    Posts: 9,319
    Default

    I bought a new vintage machine today http://www.quiltingboard.com/t-131663-1.htm and it's one of the few (I think) machines that has the needle off-center. It's standard sewing position is to the left. So...this means any of the typical 1/4" feet I have won't work with this machine. The needle would hit the foot. And of course, because it's vintage I can't move the needle position to center.

    Does anyone know if 1/4" feet are made for these off-center machines? I've googled and only found the common center position feet. Although I like the stitch quality I'm thinking the lack of a good 1/4" will be a pain...
    Candace is offline  
    Old 06-19-2011, 04:31 PM
      #2  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    I don't like using the 1/4" feet. I get better accuracy by making my own 1/4" guide out of moleskin. Here's what I do.

    Moleskin is available in the foot section of any pharmacy (Target, Walmart, etc.). I use my rotary cutter to cut strips from it. To measure accurately from the needle, I place a trusted ruler under the presser foot and lower the needle until it touches a scant 1/4" on the ruler. I lower he presser foot to keep the ruler in position. Then I check to make sure that the ruler is straight going from front to back. Once I am satisfied with the placement of the ruler, I peel the backing paper off a strip of moleskin and use the ruler edge as a guide for sticking the moleskin to the bed of the machine. Once the guide is in place, I sew three 2.5-inch strips of fabric together, press, and measure to make sure that the finished width is 6.5 inches. If I am off, I re-do the process.

    My only question about your machine is whether 1/4" from the needle clears the feed dogs. If it falls on top of the feed dogs, then you need to modify my process so that you have a moleskin guide strip in front of the feed dogs and another behind the feed dogs.

    To sew, all I do is butt my fabric edges against the moleskin. Having that physical guide for my fabric means I do not have to stare at the edge of the foot. I can sew very fast and still get accurate seams.

    My only caveat for this approach is that if you have a vintage machine with the old black finish on it, then the adhesive on the moleskin may eventually dull the finish. This would not affect how the machine works, but would affect cosmetic appearance down the line. Most of my thrift shop machines are pretty beat up, so I wouldn't mind using moleskin on them. However, if you have a pristine black finish and want to keep it that way, adhesive is not the way to go. In that case you may want to look for a metal guide accessory; many of the vintage machines allowed a metal guide to be screwed into the base to act in much the same way that my moleskin does.

    If you post the brand and model # of the vintage machine, there may be someone here who has a solution specific to that machine.
    Prism99 is offline  
    Old 06-19-2011, 05:04 PM
      #3  
    Super Member
    Thread Starter
     
    Join Date: Jan 2010
    Location: Outer Space
    Posts: 9,319
    Default

    That's a very good alternative to finding a 1/4" foot for this machine. I've used painter's tape in the past, but the moleskin would be better. Yes, the 1/4" would be on the feed dogs since the needle is in the left position. Thanks for the suggestion, that may work. I don't plan on using this machine for piecing, but would like the option;> The finish on this machine isn't pristine, so no worries there...
    Candace is offline  
    Old 06-21-2011, 03:50 PM
      #4  
    Super Member
    Thread Starter
     
    Join Date: Jan 2010
    Location: Outer Space
    Posts: 9,319
    Default

    I was able to play with the machine today and found out how to move the needle to the center. Yippee. It wasn't in the manual for some reason. At least I can find some feet for it now.
    Candace is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    J Miller
    For Vintage & Antique Machine Enthusiasts
    27
    03-12-2024 05:24 AM
    Watson
    Main
    9
    03-14-2018 02:14 PM
    margaret53
    Main
    7
    05-18-2016 05:18 AM
    Blackberry
    For Vintage & Antique Machine Enthusiasts
    11
    09-23-2014 01:06 PM
    Hockeyrabbit
    Main
    9
    01-27-2013 05:46 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter