FMQ Question
#1
Now that I have a machine that will do FMQ (thank you Santa!) I want to learn how to do FMQ. So far, the only machine quilting I have really done is straight line, in the ditch. My question is do you do a couple of backstitches at the start and end of your FMQ lines? If not, how do you secure the stitching and keep it from unravelling?
#3
I just start sewing, but don't move the fabric for a few stitches, then start the free motion. That probably is not the correct way to do it, so will be interested in what the real free motion quilters say.
#4
You pull the bobbin thread up from the bottom, either set your stitch length to 0 if you are doing straight stitch or stitch in the ditch, make a few stitches, then set your stitch length to normal or if you are FMQ just stitch in place for a few stitches then start moving.
#5
If you are sewing your binding on by machine, start in the very edge of the quilt, the stitches will be secure and you can FMQ in and out of the seamline. If you are binding by hand, start with 3 or 4 very small stitches and end the same way, staying out of the seam line.
It was just discussed that when you hand sew the binding, your stitches may show due to the quilting in the seam lines. :D:D:D
It was just discussed that when you hand sew the binding, your stitches may show due to the quilting in the seam lines. :D:D:D
#7
If you do a few tiny stitches before you get going, it will hold. Pulling the bobbin thread up when starting took me a while to get the hang of, but I finally did. If you can take a class at a local quilt shop, it will probably be helpful. There are also many videos on You Tube you can check out. It takes practice, and patience. Make up a bunch of "sandwiches" and practice. I also tested several different kinds of thread and marked them on the sandwich. There were some that didn't do well with my machine. That way, I can keep track of what's best to use. Have fun practicing! :)
#8
Power Poster
Join Date: Nov 2007
Location: SW Iowa
Posts: 32,855
Originally Posted by Barb_MO
I just start sewing, but don't move the fabric for a few stitches, then start the free motion. That probably is not the correct way to do it, so will be interested in what the real free motion quilters say.
#9
Originally Posted by cjc
You pull the bobbin thread up from the bottom, either set your stitch length to 0 if you are doing straight stitch or stitch in the ditch, make a few stitches, then set your stitch length to normal or if you are FMQ just stitch in place for a few stitches then start moving.
Thread
Thread Starter
Forum
Replies
Last Post
mjpEncinitas
For Vintage & Antique Machine Enthusiasts
6
12-12-2019 05:19 PM