Go Back  Quiltingboard Forums >
  • Main
  • Not sure what to do >
  • Not sure what to do

  • Not sure what to do

    Thread Tools
     
    Old 05-28-2012, 04:35 PM
      #1  
    Junior Member
    Thread Starter
     
    hsweany's Avatar
     
    Join Date: Jun 2011
    Location: Indiana
    Posts: 195
    Default Not sure what to do

    I just took my crib size quilt from the washer and everywhere I had joined triangles is ripped open. I made the triangles by sewing two seams close to the diagonal center and then cutting. I guess I must have cut too close to the seam???? What can I do to fix this? Thanks for your help.
    hsweany is offline  
    Old 05-28-2012, 04:41 PM
      #2  
    Super Member
     
    Deb watkins's Avatar
     
    Join Date: Apr 2009
    Location: Horseheads, NY 14845
    Posts: 4,025
    Default

    I have not had this problem at all. Being accurate in cutting, sewing and trimming is key.
    Deb watkins is offline  
    Old 05-28-2012, 04:44 PM
      #3  
    Power Poster
     
    joyce888's Avatar
     
    Join Date: Oct 2010
    Location: Georgia
    Posts: 11,189
    Default

    Could you post a pic? Not knowing what the top looks like I have some ideas but don't want to speak without seeing the problem and knowing the style of quilt.
    joyce888 is offline  
    Old 05-28-2012, 05:07 PM
      #4  
    Power Poster
     
    nativetexan's Avatar
     
    Join Date: Feb 2009
    Location: home again, after 27 yrs!
    Posts: 19,388
    Default

    well it's a baby quilt, perhaps you could mend all the seams by doing a zig zag over them. or a double line of zig zags to be certain to catch both sides of the fabrics in the seam area. Good luck!!
    nativetexan is offline  
    Old 05-28-2012, 05:09 PM
      #5  
    Super Member
     
    hopetoquilt's Avatar
     
    Join Date: Aug 2010
    Location: New Jersey
    Posts: 2,860
    Default

    You should draw a line diagonally and then sew 1/4 inch away from either side of the line. then cut down the line. i am not sure why your seams came apart. I am sorry that happened after all the time you put into the quilt. If you can post a picture or describe in greater detail, perhaps we can help more.
    hopetoquilt is offline  
    Old 05-28-2012, 05:14 PM
      #6  
    Super Member
     
    #1piecemaker's Avatar
     
    Join Date: Oct 2007
    Location: Ashdown, AR
    Posts: 9,238
    Default

    You might could put a little wonder under on it and iron it down. But, I've never had this problem before. You might even try a little blind whip stitch by hand.
    #1piecemaker is offline  
    Old 05-28-2012, 05:22 PM
      #7  
    Super Member
     
    Join Date: Oct 2008
    Location: chicago, IL
    Posts: 9,589
    Default

    Did you use a longer stitch when sewing these seams? Diagonal seams need a tighter stitch length. They may be able to be mended by adding some trim along the bad seam.
    Tink's Mom is offline  
    Old 05-28-2012, 06:21 PM
      #8  
    Super Member
     
    Join Date: Jun 2011
    Location: Michigan. . .FINALLY!!!!
    Posts: 6,726
    Default

    I had this happen once on a pinwheel quilt. And thankfully it only happened in one seam!!! I wound up taking out the damaged triangle and handsewing in a replacement. I'm pretty sure it happened because when I cut my squares apart, I must have cut less than 1/4" for this particular block. It is the only thing I can think of because this quilt was alot of HST and I only had one seam fail.

    The first picture is the blown seam and the the third picture is the same block after my repair
    Attached Thumbnails 102_3057.jpg   102_3064.jpg   102_3073.jpg  

    Last edited by auntpiggylpn; 05-28-2012 at 06:24 PM.
    auntpiggylpn is offline  
    Old 05-28-2012, 06:26 PM
      #9  
    Super Member
     
    LynnVT's Avatar
     
    Join Date: Jan 2012
    Location: Vermont, USA
    Posts: 1,346
    Default

    Good that it happened when you washed it, and not afterward when you gave it to the mom. She'd probably be embarrased to tell you, and you'd feel bad if you found out about it. I agree, best to use smaller stitch for diagonals especially. Could be just that particular fabric was loosly woven, and seam allowance was a bit small. Sure is a cheery quilt, though.
    LynnVT is offline  
    Old 05-28-2012, 06:38 PM
      #10  
    Super Member
     
    Join Date: Apr 2011
    Location: Bosque County, Texas
    Posts: 2,709
    Default

    You need to show a picture. I think (without seeing it) that you have but 2 choices of repair types. Remove the fabric with the bad seams and replace, or mend the seams from the top. If the pattern is such that you can applique something on top of the seams - even strips of seam binding tape or narrow sashing- in a color that will enhance your color scheme I would probably select that repair from the top method and sew through the whole quilt. It would in effect quilt the quilt while stitching the new fabric down. Since it is a child's quilt, might it be possible to select applique

    shapes appropriate to childhood to cover the seams? Maybe a bad suggestion since I can't see the number or size of the frayed seams.
    TanyaL is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    isewman
    Pictures
    24
    02-21-2017 05:35 PM
    deedum
    For Vintage & Antique Machine Enthusiasts
    27
    02-04-2012 06:28 PM
    AngieS
    For Vintage & Antique Machine Enthusiasts
    0
    11-06-2011 02:25 PM
    AUQuilter
    Links and Resources
    3
    10-28-2011 04:29 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter