Go Back  Quiltingboard Forums >
  • Main
  • SCANT 1/4 INCH IS MAKING ME CRAZY >
  • SCANT 1/4 INCH IS MAKING ME CRAZY

  • SCANT 1/4 INCH IS MAKING ME CRAZY

    Thread Tools
     
    Old 10-21-2010, 02:30 PM
      #1  
    Member
    Thread Starter
     
    happy_lady's Avatar
     
    Join Date: Apr 2010
    Location: Beaufort SC
    Posts: 20
    Default

    I've been quilting for almost ten years and continue to find sewing a scant 1/4 inch very frustrating. Is there such a thing as a quilting foot that measures this elusive 1/4 inch? If there is, I would love to own one. or is this just another one of my pipedreams.
    happy_lady is offline  
    Old 10-21-2010, 02:33 PM
      #2  
    Power Poster
     
    amma's Avatar
     
    Join Date: Jul 2007
    Location: Out searching for some sunshine :-)
    Posts: 58,856
    Default

    I wish they would make a scant 1/4" foot!
    I use my 1/4" foot and move the needle one click to the right :D:D:D
    amma is offline  
    Old 10-21-2010, 02:35 PM
      #3  
    Junior Member
     
    Join Date: Apr 2010
    Location: Ontario
    Posts: 296
    Default

    There is a quarter inch sewing foot. I use mine all the time. Can't piece without it. lol You should be able to purchase one that works with your machine.
    M. Wills is offline  
    Old 10-21-2010, 02:36 PM
      #4  
    Super Member
     
    maine ladybug's Avatar
     
    Join Date: Jun 2010
    Location: Maine
    Posts: 2,944
    Default

    I know. this new "scant 1/4 inch" is enough to drive you crazy. I've come across it and my question is...."Why not just give us the correct measurements to cut the fabric, so then we can just sew the normal 1/4 inch? "
    maine ladybug is offline  
    Old 10-21-2010, 02:39 PM
      #5  
    Power Poster
     
    BellaBoo's Avatar
     
    Join Date: Jan 2009
    Location: Front row
    Posts: 14,646
    Default

    I would not piece without my 1/4 foot with attached guide. Without the guide it's useless to me. I have one for all my machines from Featherweight to Janome. they are easy to find on Ebay and most machine shops online.
    The directions would say cut strips to 1/32" if the scant 1/4" was factored in. Most would freak at that measurement. LOL
    BellaBoo is offline  
    Old 10-21-2010, 02:48 PM
      #6  
    Super Member
     
    sewcrafty's Avatar
     
    Join Date: Feb 2010
    Location: New Hampshire
    Posts: 3,877
    Default

    Originally Posted by BellaBoo
    I would not piece without my 1/4 foot with attached guide. Without the guide it's useless to me. I have one for all my machines from Featherweight to Janome. they are easy to find on Ebay and most machine shops online.
    The directions would say cut strips to 1/32" if the scant 1/4" was factored in. Most would freak at that measurement. LOL
    A lot of feet will sew the 1/4", but the scant is to compensate for the thread used for the piecing. If you have a thinner thread, then probably no need for adjustment. If thicker weight thread, that's when the adjusting is going to come into play.

    I have a Janome 6600 and I adjust the needle position by 2 clicks to the right to compensate.
    sewcrafty is offline  
    Old 10-21-2010, 02:51 PM
      #7  
    Power Poster
     
    Join Date: Mar 2009
    Posts: 15,639
    Default

    I use the standard sewing foot and move the needle to be in the right position (1/4" or scant 1/4") It is a pain!
    MadQuilter is offline  
    Old 10-21-2010, 02:58 PM
      #8  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    I don't rely on a foot. I use a strip of heavyweight moleskin and butt my fabric up against that as I sew. My seams turn out much more even that way.

    To measure the scant 1/4" for moleskin placement, I place my favorite cutting ruler under the presser foot, make sure it is positioned fairly straight front-to-back, move my needle position one place to the right (with my older Bernina I have to do this in order for the moleskin to clear the feeddogs), lower the needle so that it touches the ruler just to the right of the 1/4" line, and lower the presser foot to hold the ruler in place. I have already cut the moleskin into strips using a ruler and rotary cutter, so I just remove the paper from the back of the moleskin and carefully position it so it is butted up against my ruler edge.

    Although I often use just a 2" or 3" long strip of moleskin, my preference if I am going to be sewing long strips together is to make the moleskin strip even longer, so it is guiding the fabric long before the fabric actually gets to the needle.

    Anyway, with this method I don't have to force my eyes to constantly look at the marking on a foot; as long as the fabric is butting up against the moleskin as it feeds, I am going to get a good seamline.

    As someone else mentioned, thread thickness can affect seam width. Once you have the moleskin positioned, it's a good idea to do a test of 3 2-1/2" strips sewn together so that, when ironed, you are sure the finished measurement is exactly what it should be.

    Moleskin is available in the foot section of pharmacies. It is a cushioning product sold for placing on heels, etc., to prevent blisters or protect a blister from rubbing.
    Prism99 is offline  
    Old 10-21-2010, 03:00 PM
      #9  
    Super Member
     
    Join Date: Jan 2010
    Location: Outer Space
    Posts: 9,319
    Default

    The 1/4" foot is NOT the issue and typically it's not the pattern either. You will have to move the needle position based on fabric and thread thickness as mentioned before. I have to move my needle when working with flannels(thicker) and the different brands and weights also affect the seam allowance. It's always best to do a test run of the fabrics you're using with the thread and move your needle over if need be. Usually I don't have to move my needle at all if I'm using LQS fabric with Aurifil 50 wt. thread. But, if I change any of those, I do a sample.
    Candace is offline  
    Old 10-21-2010, 03:08 PM
      #10  
    Super Member
     
    Join Date: Oct 2009
    Posts: 5,453
    Default

    Originally Posted by sewcrafty
    Originally Posted by BellaBoo
    I would not piece without my 1/4 foot with attached guide. Without the guide it's useless to me. I have one for all my machines from Featherweight to Janome. they are easy to find on Ebay and most machine shops online.
    The directions would say cut strips to 1/32" if the scant 1/4" was factored in. Most would freak at that measurement. LOL
    A lot of feet will sew the 1/4", but the scant is to compensate for the thread used for the piecing. If you have a thinner thread, then probably no need for adjustment. If thicker weight thread, that's when the adjusting is going to come into play.

    I have a Janome 6600 and I adjust the needle position by 2 clicks to the right to compensate.
    this is why the cutting of the dreaded 7/8" for HST's is a waste, i just round up. if i was cutting one strip, i may cut that, but when you are cutting alot of them, in a row..i just cut the whole number up..
    and i also have the 6600 and the 1 or 2 clicks for me..are good.
    (depends on what thread i am using.)
    watterstide is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    okie2tx
    Main
    8
    04-29-2013 10:02 AM
    Peckish
    Main
    12
    10-20-2011 07:45 AM
    ShirlR
    Main
    18
    09-07-2010 07:52 AM
    ProquiltLongarmARTQUILTER
    Main
    25
    02-20-2008 07:09 AM
    ArtquilterNEWWAYtoQUILT
    Main
    16
    12-11-2007 04:00 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter