Better lighting
#13
Super Member
Join Date: Jan 2013
Location: Florida
Posts: 3,832
Not only light but movement of air and the noise of the wind in the trees makes me feel more open.
Daylight bulbs and ones that don't put off much heat. Daylight is a cool white, not warm white. So for the walls, I'd suggest very light taupe, rather than cream.
The ambient light is important: this is general lighting reflecting off the ceiling (it must be light to reflect light). Then there's task lighting which would be over the work stations. Sounds like you have task lighting. Maybe you need more general lighting.
Daylight bulbs and ones that don't put off much heat. Daylight is a cool white, not warm white. So for the walls, I'd suggest very light taupe, rather than cream.
The ambient light is important: this is general lighting reflecting off the ceiling (it must be light to reflect light). Then there's task lighting which would be over the work stations. Sounds like you have task lighting. Maybe you need more general lighting.
#15
I redid the whole thing down stairs . I called and electrician and went with his advise of cannon lights and special lighting. We used bulbs that was nature lighting. I divided the switches to work in half on 1 circuit and the next half on the another switch. Then brought in a drywaller to do the walls. Then the floating floor was put down.
#16
I have taken the funnel shaped shop clip on lights and hung them on a free standing coat rack. I can move them around as needed. You can get the daylight bulbs to put in them. I also have a good desk lamp with a goose neck, on my cutting/sewing table that I move around as needed. I find that them older I get, the more light I need.
#17
Senior Member
Join Date: Nov 2010
Location: Merritt Island, FL
Posts: 672
I also sew in a semi underground area (one small window that doesn't open). We recently replaced the 2 fluorescent tubes in the light above my sewing machine with 2 tubes that contain LED lights and oh my, are they ever bright. I still have the fluorescents above my cutting table, iron and under the shelving above my counter space. You wouldn't believe the difference...cooler, cheaper to use, long life, BUT $$$$
My sewing room is in the basement and does not have good lighting. My DH put flourescent lights in the ceiling, one over my sewing table, on over the ironing board, and one over the table where I do my cutting. It still feels dark to me - I think I crave natural light!. I've tried painting the walls a bright color. Anyone have some suggestions for more natural lighting?
#18
One thing to consider when buying fluorescent lights is the lumens...the higher the number, the more light it gives off. I had wondered for years what the difference was in fluorescent lights so finally thought to google it. I always go for the higher number.
#19
I'd move a bedroom to the basement and take over the bedroom. When someone is asleep it doesn't matter if the room is dark. As I told my kids when I took over the den for my sewing room and they didn't like it at all, it's your home but it is my house. They never got the den back.
#20
Power Poster
Join Date: Jan 2008
Location: Florida
Posts: 17,636
Thread
Thread Starter
Forum
Replies
Last Post
barnbum
Pictures
16
03-11-2008 07:30 AM