Go Back  Quiltingboard Forums >
  • Main
  • Free Motion Slider >
  • Free Motion Slider

  • Free Motion Slider

    Thread Tools
     
    Old 11-09-2010, 07:17 AM
      #91  
    Super Member
    Thread Starter
     
    featherweight's Avatar
     
    Join Date: Aug 2010
    Location: Westminster, Co
    Posts: 2,675
    Default

    Originally Posted by janb
    Originally Posted by featherweight
    I made myself a FM slider. Went to Bed Bath & Beyond and purchased a "Chef'splanet Non-stick Ovenliner" It measures 23" x 25", twice as long as purchased sliders.This could be cut in two and either share with a friend or keep as spare. I kept mine large as I have a machine table that lowers my machine. If I find that is is to large I will split in two. I then put the rubberized shelf line on the outside of the slider and around the needle hole, on the bottom side of slider to keep from moving. I have a lap quilt almost ready to FMQ, so I am excited to use it. The price was $19.99, and I had a $5.00 off coupon. The Supreme slider sells for around $30.00 plus shipping. The SewSlip sells for about $27.00 plus shipping and they are half the size.
    Just a day earlier and I could have saved enough to buy some more material....darn it!!!
    Oh shoot! I should have thought of it a day eariler, huh??
    featherweight is offline  
    Old 11-09-2010, 08:01 AM
      #92  
    Super Member
     
    Join Date: May 2010
    Location: Ontario, Canada
    Posts: 1,779
    Default

    I haven't found any in the stores close by but I might be able to go to a Christmas Tree shop next week to find one :) I'm excited to try it!!!
    costumegirl is offline  
    Old 11-09-2010, 08:06 AM
      #93  
    Senior Member
     
    dgrindey's Avatar
     
    Join Date: Jun 2010
    Location: Palmdale, California
    Posts: 657
    Default

    Originally Posted by featherweight
    Originally Posted by dgrindey
    Originally Posted by featherweight
    Originally Posted by dgrindey
    Originally Posted by featherweight
    Originally Posted by BellaBoo
    The Slider is super slick. I haven't found anything that slicky to use for a substitute that didn't cost the same or more.
    This is very slick too!! and twice as big.
    Sorry and I hate to sound stupid but I've not heard of the slider before and that may be because I've not done my own quilting. However, am going to try to do my own because it's too expensive to send the quilts out. Anyway, I don't quite understand how you are using this---does it go under the quilt to help slide it along or what? Can you explain for me. Thanks much
    Donna
    Yes, It goes on the bed of the machine. The slick surface helps when you move the quilt while you are FMQ. I injured my hand again so I have not been able to use it. Hopefully soon.
    Thanks for the explanation--now I've got it. Oh my! I hope you didn't injur your hand badly. Take care.
    Thank you, I had surgery on hand in May . It takes a little over a year to heal and I fell on it a couple of weeks ago and now I am in a splint again until it is better. Darn. Always something!!
    Feel better and take care of your hand----
    dgrindey is offline  
    Old 11-11-2010, 08:19 PM
      #94  
    Member
     
    Join Date: Oct 2010
    Location: Westminster, Colorado
    Posts: 4
    Default

    Hey...could you PM me about this??
    Dianne120 is offline  
    Old 11-11-2010, 08:35 PM
      #95  
    Super Member
    Thread Starter
     
    featherweight's Avatar
     
    Join Date: Aug 2010
    Location: Westminster, Co
    Posts: 2,675
    Default

    Originally Posted by Dianne120
    Hey...could you PM me about this??
    What ya need??
    featherweight is offline  
    Old 11-11-2010, 08:36 PM
      #96  
    Super Member
    Thread Starter
     
    featherweight's Avatar
     
    Join Date: Aug 2010
    Location: Westminster, Co
    Posts: 2,675
    Default

    Originally Posted by featherweight
    Originally Posted by Dianne120
    Hey...could you PM me about this??
    What ya need??
    Sorry I will PM
    featherweight is offline  
    Old 11-12-2010, 07:03 AM
      #97  
    Senior Member
     
    Join Date: Mar 2010
    Location: Northeast Colorado
    Posts: 422
    Default

    I tried all day yesterday to free motion - every time I adjusted the tension, my underside (bobbin thread) got all jammed up. What am I doing wrong...I am very distressed..
    need help, I have watched the tutes on free motion and they look so easy, but I get all messed up. Anyone have a solution?
    janb is offline  
    Old 11-12-2010, 11:14 AM
      #98  
    Kas
    Super Member
     
    Kas's Avatar
     
    Join Date: Jun 2010
    Location: Renton, WA
    Posts: 2,045
    Default

    Originally Posted by janb
    I tried all day yesterday to free motion - every time I adjusted the tension, my underside (bobbin thread) got all jammed up. What am I doing wrong...I am very distressed..
    need help, I have watched the tutes on free motion and they look so easy, but I get all messed up. Anyone have a solution?
    Maybe you are stitching too long in one place. Try moving the fabric faster with less speed on the needle. Let us know!
    Kas is offline  
    Old 11-12-2010, 11:49 AM
      #99  
    Super Member
     
    patdesign's Avatar
     
    Join Date: Mar 2010
    Location: So. Fla now, Va orig
    Posts: 1,565
    Default

    Originally Posted by Kas
    Originally Posted by janb
    I tried all day yesterday to free motion - every time I adjusted the tension, my underside (bobbin thread) got all jammed up. What am I doing wrong...I am very distressed..
    need help, I have watched the tutes on free motion and they look so easy, but I get all messed up. Anyone have a solution?
    Maybe you are stitching too long in one place. Try moving the fabric faster with less speed on the needle. Let us know!
    You may need to tighten the upper tension, other than that its a combination of moving the quilt and the speed you are running the machine. You have to strike a balance. The free motion slider does help the quilt move more easily on the bed of the machine, but mostly its just finding the right combination of machine speed and your movements. :-)
    patdesign is offline  
    Old 11-12-2010, 12:01 PM
      #100  
    Super Member
    Thread Starter
     
    featherweight's Avatar
     
    Join Date: Aug 2010
    Location: Westminster, Co
    Posts: 2,675
    Default

    Originally Posted by patdesign
    Originally Posted by Kas
    Originally Posted by janb
    I tried all day yesterday to free motion - every time I adjusted the tension, my underside (bobbin thread) got all jammed up. What am I doing wrong...I am very distressed..
    need help, I have watched the tutes on free motion and they look so easy, but I get all messed up. Anyone have a solution?
    Maybe you are stitching too long in one place. Try moving the fabric faster with less speed on the needle. Let us know!
    You may need to tighten the upper tension, other than that its a combination of moving the quilt and the speed you are running the machine. You have to strike a balance. The free motion slider does help the quilt move more easily on the bed of the machine, but mostly its just finding the right combination of machine speed and your movements. :-)
    You are so right about helping you FMQ, What it is intended for is to let you move the quilt a little easier.
    featherweight is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    quiltingeileen
    Main
    22
    10-08-2015 03:00 PM
    sewsewquilter
    Main
    15
    11-02-2012 07:34 PM
    Dee Dee
    Main
    9
    12-01-2010 05:20 AM
    Esther Grass
    Main
    7
    11-14-2010 11:39 PM
    barnbum
    Main
    13
    05-26-2008 10:42 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter