When Binding by machine....
08-06-2018, 06:45 AM
#41
Junior Member
Join Date: Dec 2010
Location: Northern IL
Posts: 117
I use 2 1/4" binding too but I put it on differently. I stitch it to the back of the quilt first with about a 3/8" seam. Then flip it over to the front and sew it with an adjustable zipper foot. I hold 2-3" inches in place, with the edge just a hair over the seam line and sew the few inches, stop and place the next few inches, sew, etc. It tends to go fast when you get going, I'm always finished sooner than I thought I'd be. and I don't have all that extra binding outside of the seam.
Cari
Cari
08-06-2018, 07:07 AM
#42
Super Member
Join Date: Sep 2010
Location: California, USA
Posts: 1,318
How do you do the corners of the quilt binding? Do you cut the thread and then restart the sewing after you fold over the mitered corner?
08-06-2018, 07:50 AM
#43
Super Member
Thread Starter
Join Date: Dec 2015
Location: Ontario, Canada
Posts: 4,378
I will definitely try sewing it to the back first next time.
This board is so great. I would never have thought of that on my own, as sewing it to the front is just how I was always taught. Guess I need to be a rebel sometimes.
Watson
This board is so great. I would never have thought of that on my own, as sewing it to the front is just how I was always taught. Guess I need to be a rebel sometimes.
Watson
08-06-2018, 07:58 AM
#44
Super Member
Join Date: Aug 2015
Location: Central Texas
Posts: 1,310
I have the same issues - which is why I do the final stitching by hand. I don't like that lip of fabric on the back either; on baby quilts because they washed so much I will do a decorative stitch so it goes over both sides of the seam line and will stand up under many washings. I have tried all different widths; nothing has worked, so. . . . .
08-06-2018, 05:21 PM
#45
Super Member
Join Date: Mar 2010
Location: Upstate NY, north of Syracuse Area
Posts: 6,003
I cut my binding at 2-1/2" wide, fold in half, press, sew it on with 3/8" seam on the back. Turn over and stitch to the front. I check to make sure all of the front binding is sewn down. Get it ready to be laundered, then on to the next quilt. If I made competition or heirloom quilts I might worry about how the back of the binding looks, probably not. If I am pleased then whomever gets it will be pleased too.
08-07-2018, 04:30 AM
#47
Super Member
Join Date: May 2017
Location: Sunny Florida
Posts: 4,435
Fold the binding into the corner fold and hold it together. Continue stitching until you reach that corner turning point. Keep the needle down in the corner point.
Lift up the presser foot, turn the quilt and continue to sew the binding.
Here is a tutorial I have used to sew binding.
https://quiltwithmarcibaker.com/mitered-corners-for-quilt-binding-dont-miss-the-point-2/
This also shows How to Stitch Off the Corners.
Last edited by Rhonda K; 08-07-2018 at 04:32 AM.
08-07-2018, 04:38 AM
#48
Super Member
Join Date: Oct 2015
Location: Va.
Posts: 5,753
what a timely post. Rryder, I also have the Martelli zip binding and quarter inch foot set-up. I am determined to make it work for me and have bound this week a total of 3 quilts and have 2 more to do. On the third one, it seems to be getting better. How many did you have to complete before it really started looking good? (I think my first two times - the batting that was way too fluffy). My last one was using warm & natural and I really liked that....so maybe that's the key...find a batting that you can get to work and stick with it? How much practice do I need until I feel it's good? I do machine binding for Quilts of Valor and Project Linus and really want them to look nice.
i would not use this system for a quilt that will be shown or entered in competitions, but it does make it fairly quick and easy to do a completely machine sewn binding that looks pretty good and is secure and sturdy enough for a quilt that will get a lot of use.
Rob
08-07-2018, 08:30 AM
#49
Senior Member
Join Date: Jan 2015
Location: Southwest
Posts: 739
Thanks rryder....I'm getting better the more I do. On the 4th quilt.....I was finally able to "catch" the back side! Finally. I think I like it......finally. Both QOV and Project Linus prefer the machine binding.....so that's why I was so determined.
Glad to see someone out there who is successful using it. I go really slow and like your hint of checking every 6 inches or so. Thanks!
Glad to see someone out there who is successful using it. I go really slow and like your hint of checking every 6 inches or so. Thanks!
08-09-2018, 07:40 AM
#50
Senior Member
Join Date: Jun 2009
Location: Woburn, MA
Posts: 711
I have put all my bindings on by machine for many years now. I am also the binding queen at comfort quilt workshops. I cut my binding 2 1/2" wide, fold in half and iron. I then sew my binding on the back of the quilt, one third of the way from the edge. Then you fold up 1/3 and down the front 1/3. I can then sew on the binding edge (on the front) and see where the stitches are. I like to use the same fabric for the binding (or close in color) as the backing. That way you don't really see the stitches too much on the back and the front always looks great. Try it, you will like your results.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
0
11-03-2011 01:23 PM
craftybear
Links and Resources
1
10-20-2011 04:45 PM
craftybear
Links and Resources
3
05-07-2011 10:05 AM
craftybear
Links and Resources
3
12-25-2010 09:49 PM
