Bent Doesn't Mean It's Broken
#1
Junior Member
Thread Starter
Join Date: Apr 2014
Posts: 200
Bent Doesn't Mean It's Broken
i was cleaning my singer 66-1 bobbin assembly (this is the dirtiest, grimiest machine i have worked on) and noticed that the bobbin case fin is kinda bent. duhhhh, it's not bent, it's normal. so i took a plier and tried hard to straighten it and guess what - i broke it. thought this is SS or metal at least but it looks like it's cast metal. oh well expensive lesson for me.
parts are full of oil gunk that alcohol will not even melt them. so i have to scrape it and use steel brush. i bet you the previous owner must have drenched it with 3-1 oil. it's not moving freely as i speak. it seems that it's hitting on something but i am trying to soak them in oil first.
anyone has extra parts ?? and this one is also missing the back clamp presser feet. PM me pls if you do have the bobbin case and presser feet for 66-1. thanks.
parts are full of oil gunk that alcohol will not even melt them. so i have to scrape it and use steel brush. i bet you the previous owner must have drenched it with 3-1 oil. it's not moving freely as i speak. it seems that it's hitting on something but i am trying to soak them in oil first.
anyone has extra parts ?? and this one is also missing the back clamp presser feet. PM me pls if you do have the bobbin case and presser feet for 66-1. thanks.
#2
Super Member
Join Date: Aug 2011
Location: Texas
Posts: 3,667
Wish I could help you out. I have a Singer 66, it was my great grandma's passed down to my Nanny, then me. My mom doesn't sew.
Mine was missing the throat plate, I found a very reasonably priced replacement on eBay. Maybe check there?
I know there's lots of very knowledgeable antique machines people here that I'm sure will have some helpful ideas for you.
Regards,
Kif
Mine was missing the throat plate, I found a very reasonably priced replacement on eBay. Maybe check there?
I know there's lots of very knowledgeable antique machines people here that I'm sure will have some helpful ideas for you.
Regards,
Kif
#4
Super Member
Join Date: Feb 2012
Posts: 8,091
singerguy,
I don't have a replacement bobbin case, but here's a tip. For machines like yours that defy normal cleaners I use Hoppe's #9 Gun Cleaning solvent. Works like a charm. Won't, or hasn't yet, damaged the finishes on any of the older black Singers I've used it on. You'll still need a brush but a tooth brush will do. Cotton balls and q-tips too. After that you can use denatured alcohol to remove the residue then oil it.
Joe
I don't have a replacement bobbin case, but here's a tip. For machines like yours that defy normal cleaners I use Hoppe's #9 Gun Cleaning solvent. Works like a charm. Won't, or hasn't yet, damaged the finishes on any of the older black Singers I've used it on. You'll still need a brush but a tooth brush will do. Cotton balls and q-tips too. After that you can use denatured alcohol to remove the residue then oil it.
Joe
#5
Member
Join Date: Sep 2011
Location: Shreveport, Louisiana
Posts: 87
Ha! I thought I was the only one who had broken bobbin cases like that! And I hope you didn't feel as stupid as I did.
I think that when you consider how old those machines are, it isn't a surprise that the metal i some areas is brittle. I just with I had thought of that BEFORE I tried to straighten it out.
There are new ones available from our beloved suppliers of old things, but don't forget that there are lots of "parts" machines out there, too. I had a couple of 99's that were beyond help, but the bobbin cases were fine. Believe me, I saved that part!
I think that when you consider how old those machines are, it isn't a surprise that the metal i some areas is brittle. I just with I had thought of that BEFORE I tried to straighten it out.
There are new ones available from our beloved suppliers of old things, but don't forget that there are lots of "parts" machines out there, too. I had a couple of 99's that were beyond help, but the bobbin cases were fine. Believe me, I saved that part!
Thread
Thread Starter
Forum
Replies
Last Post
Sewnoma
For Vintage & Antique Machine Enthusiasts
10
08-13-2015 05:23 AM
Ellageo
General Chit-Chat (non-quilting talk)
9
02-19-2015 07:43 AM
bearisgray
General Chit-Chat (non-quilting talk)
66
05-13-2011 07:22 PM