Originally Posted by BoJangles (Post 4982860)

Have any of you tried using metallic thread on your 401a's or a similar machine? Yesterday, I changed needles (to a metallic needle), re-threaded several times, put the metallic thread on a spool behind the machine so the thread could relax before it hit the thread guides, played with the tension, did everything I could think of to get my new 401a to accept the metallic thread! No go - I spent an hour going 5 inches, cutting the bobbin thread off every 1/2" or so when it jammed, removing the slide plate, cleaning the bobbin area, re-threading the bobbin - everything I could think of! I would sew a 1/2 inch or so then it jammed up - had to cut the bobbin thread off underneath due to a huge mess. I switched to a 50 weight DMC thread and didn't have any issues at all? I really wanted to use metallic thread on a little Patchability I was doing!

Nancy

Originally Posted by BoJangles (Post 4982751)

Yep, makes sense to me too. Luckily, I have not had to tweak any of my treadles! My Betty (Davis Vertical Feed) is by far the hardest/most work out to treadle. I think that is probably because I only use her to put bindings on Queen/King sized quilts, and because she has to 'walk' the quilt to sew!

Nancy

Originally Posted by BoJangles (Post 4982804)

Geeze, Charlee that is an interesting article. Reminds me of what Glenn says about the fact that the wood is dead and doesn't need feeding or something like that. Glenn, I'd like to see your observations on that article. Does that mean I have to quit using Liquid Gold on my cabinets - I love the way they shine when I use it?

Nancy

Originally Posted by BoJangles (Post 4982860)

Have any of you tried using metallic thread on your 401a's or a similar machine? Yesterday, I changed needles (to a metallic needle), re-threaded several times, put the metallic thread on a spool behind the machine so the thread could relax before it hit the thread guides, played with the tension, did everything I could think of to get my new 401a to accept the metallic thread! No go - I spent an hour going 5 inches, cutting the bobbin thread off every 1/2" or so when it jammed, removing the slide plate, cleaning the bobbin area, re-threading the bobbin - everything I could think of! I would sew a 1/2 inch or so then it jammed up - had to cut the bobbin thread off underneath due to a huge mess. I switched to a 50 weight DMC thread and didn't have any issues at all? I really wanted to use metallic thread on a little Patchability I was doing!

Nancy

Originally Posted by Charlee (Post 4982896)

I tried to edit the post to add that our Glenn has been telling us this for a long time, but my computer was acting up! :)

Originally Posted by misseva (Post 4983476)

Regarding using something else for belts. I'm like faaaarrrrrrr away from anyone that sells belts. I ordered two leather ones and could not for the life of me get one stapled together. In trying to make a hole - the belt kept slipping and hole went in crooked and resulted in the belt splitting. Soooo I read here on the board that someone used the leg of a panty hose and I tried it. Works like a charm and cost was zero. And was much easier to put on - just stretch it as far as it would go and tie a knot.

Also I have a question. Can someone tell me the model number of a Singer electric machine - serial #AH300426. I think it was manufactured in 1947. It belongs to a friend and she needs a power cord that goes from machine to plug in. I've never seen the machine - just going by her description.