Originally Posted by jlhmnj
(Post 5736469)
Ebay has a excellent and in favor of the buyer refund policy. A full refund including shipping will be refunded to buyer if they go through the proper ebay channels for damaged merchandise.
Jon |
Originally Posted by miriam
(Post 5736482)
So it would pay to learn how to ship things very well if you sell from Ebay. I much prefer to sell locally from CL. No shipping and I can make sure someone knows how to work the sewing machine before it leaves... That way they know and I know it is in working order.
Jon |
Charlee, congrats on your sewing room and the new grandbaby! I know you will enjoy both!!!
|
I spent some time trying to figure out a machine... It is a Singer 401. The motor spins like crazy when you turn the clutch to bobbin winder mode. If you try to sew it starts out going great then gets slower and slower and s l o w e r.... The machine turns fine. We tired a different motor and a couple different foot controllers. Turn it back to bobbin and away she goes... It seems to be the machine. It is VERY well oiled.
|
Originally Posted by miriam
(Post 5737076)
I spent some time trying to figure out a machine... It is a Singer 401. The motor spins like crazy when you turn the clutch to bobbin winder mode. If you try to sew it starts out going great then gets slower and slower and s l o w e r.... The machine turns fine. We tired a different motor and a couple different foot controllers. Turn it back to bobbin and away she goes... It seems to be the machine. It is VERY well oiled.
I had a 401A that was locked up and wouldn’t move at all. Wiggle-jiggles finally led me to believe it was in the upper shaft, but I couldn’t find anything. I finally decided that it must be just a parts machine, but put a pipe wrench on the end of the shaft (with some leather covering the jaws) and gave it a nudge. It freed up immediately and spun like a champ, no damage. Something must have been in one end or the other of the main shaft bearings, and I forced it out. Maybe a thread? I never found a danged thing. Maybe yours has a similar problem in the making? CD in Oklahoma |
Thanks - I've tried two different motors and all the foot controllers that plug into the configuration. Same with every combo. I'll try letting it spin then put a bit of drag on it and see what it does. It is clean and moves freely. Maybe it needs more cleaning or something.
I've freed up countless 401s - I've seen some stuck up pretty much like glue. I can't remember this machine from when I cleaned it initially. I just went to check it before someone came to look at it and the dumb thing was was acting like that. Fortunately I had another one to sell the lady. When she left we fooled with the controllers and motors for a while. I'm thinking it may be time to get serious with some heavy duty cleaning down there in the gears. |
I prefer cl or estate sales. Some machines that I would have considered strongly I've walked away from seeing their true condition. A trick on Ebay they use is to show the good condition side of the machine, deceptively leaving damage obscure in the pictures... Then you have to pray it is packed properly and not abused. I insist on Fedex or UPS case the USPS specializes in doing a poor job on this sort of stuff.
Your mileage may vary. |
I prefer Fedex - they are pricy but they get it there in one piece - well so far so good.
|
I was reading some postings from earlier in the month about teaching grand kids to sew. Lauren, 6 has been interested and loves to contol the foot petal. Today I was making her a new Christmas stocking to replace the missing one, and I had her sew it up, contoling both the fabric and the foot control. Of course, I had a hand on it too. She loved it, and we even made a rice bag and cover for it for her mother. She was so pleased with her work. I oiled and greased my FW and then had her sew on paper, without thread. Later she sewed on some scrap fabric and loved it. I think I'll have a sewer there and will have to share my machine when I bring it up with me.
|
Originally Posted by DanofNJ
(Post 5737195)
I prefer cl or estate sales. Some machines that I would have considered strongly I've walked away from seeing their true condition. A trick on Ebay they use is to show the good condition side of the machine, deceptively leaving damage obscure in the pictures... Then you have to pray it is packed properly and not abused. I insist on Fedex or UPS case the USPS specializes in doing a poor job on this sort of stuff.
Your mileage may vary. Jon |
All times are GMT -8. The time now is 09:36 PM. |