Vintage Sewing Machine Shop.....Come on in and sit a spell
Kyia - don't even try FMQ on a long bobbin machine, you will break the needle. It's all to do with the way the stitch is formed underneath. Any movement of the material in any direction other than a straight line with the feed dogs gives a pull on the needle with the thread. The needle will be pulled to the side and come crashing down on the foot, and it will be goodbye needle.
You will be fine with straight line quilting, but you will probably need to experiment a bit with different feet.
Thank you Muv. Will only do straight line quilting. Do you know where I can order a belt and needles??
Kyia
Kyia
Kyiav10
I am just about finished refurbishing this same machine with the same coffin top but a 5 drawer cabinet. Unfortunately, mine was missing the shuttle and the one that I purchased rubs just a bit so I have to look into that when time permits. We put a new leather belt on her yesterday but I fear we made it a bit too loose...we shall see...can always cut off a bit but can't add on if we cut off too much. I need to get a new tire for the bobbin winder. Don't know where my mind was when I ordered other parts but I have to get some parts for the 128 that I got a couple weeks ago and am working on now. When I get time to take photos of mine refurbished, I will post them but I have a pressing time limit on another project that must come first (a challenge quilt). I am really looking forward to sewing on my VS2. Isn't it funny that our machines are identical, along with the exact same coffin top. I got a puzzle box of attachments with mine but many are missing and the ruffler was the wrong one but it was broken anyway so ...
I had to replace the veneer on the top of the box and cabinet (it disintegrated into tiny pieces and a lot of dust) and have finished the staining and shellacking. It was exciting to finally get the machine in the cabinet yesterday. My husband stripped, primed and painted the iron and put gold paint on the Singer emblem on each side. It looks very stately now as should an elderly lady of her age. Glenn has posted really good instructions on refurbishing our lovely ladies. This is quite like the machine I learned to sew on about 65 years ago. Have fun working on your machine.
Donna
I am just about finished refurbishing this same machine with the same coffin top but a 5 drawer cabinet. Unfortunately, mine was missing the shuttle and the one that I purchased rubs just a bit so I have to look into that when time permits. We put a new leather belt on her yesterday but I fear we made it a bit too loose...we shall see...can always cut off a bit but can't add on if we cut off too much. I need to get a new tire for the bobbin winder. Don't know where my mind was when I ordered other parts but I have to get some parts for the 128 that I got a couple weeks ago and am working on now. When I get time to take photos of mine refurbished, I will post them but I have a pressing time limit on another project that must come first (a challenge quilt). I am really looking forward to sewing on my VS2. Isn't it funny that our machines are identical, along with the exact same coffin top. I got a puzzle box of attachments with mine but many are missing and the ruffler was the wrong one but it was broken anyway so ...
I had to replace the veneer on the top of the box and cabinet (it disintegrated into tiny pieces and a lot of dust) and have finished the staining and shellacking. It was exciting to finally get the machine in the cabinet yesterday. My husband stripped, primed and painted the iron and put gold paint on the Singer emblem on each side. It looks very stately now as should an elderly lady of her age. Glenn has posted really good instructions on refurbishing our lovely ladies. This is quite like the machine I learned to sew on about 65 years ago. Have fun working on your machine.
Donna
Thank you, Kyia
[ATTACH=CONFIG]359818[/ATTACH][ATTACH=CONFIG]359819[/ATTACH]I have just bought these two from a Charity Store for £20 the pair. They are in complete cases and the Vibra has a box full of tools, needles and feet and guides. Even got the instruction book. Can't open the shuttle slider yet. The Fiddlebase has it's little boat shuttle and bobbin, but I can't open the catch which allows you to lean the head back. Wait for hubby to come in and have a look. I'm so excited. I learned to sew on an old made in Japan 'SANGER' with a boat shuttle.
What a nice pair of machines! The Vibra is actually a Jones machine. If a company placed a large enough order with them they would put that company's name or brand name on the machines for them. Did it come with a packet of needles? Are they round shanked?
Don't tell the Americans how much we can find machines for. They might get jealous.
Look at different websites for belts, such as Treadle Lady and Sew Classic. They aren't difficult to get hold of.
Power Poster
Join Date: Jul 2010
Location: Eastern Washington
Posts: 29,525
Almond-- lovely machine! Looks just like mine! I am curious as to where you found that table......??
Kyia
That's a beautiful machine! The Singer VS2 are fun machines. I own one that makes a beautiful stitch. you can use standard needles, 15x1. As for treadle belt, you can either use aquarium hose or a leather treadle belt. All information as to where to purchase and how to install can be found with a google search.
That's a beautiful machine! The Singer VS2 are fun machines. I own one that makes a beautiful stitch. you can use standard needles, 15x1. As for treadle belt, you can either use aquarium hose or a leather treadle belt. All information as to where to purchase and how to install can be found with a google search.
Almond, That's a lovely 301 in card table! Looks like fun!
Hello Bluebell,
What a nice pair of machines! The Vibra is actually a Jones machine. If a company placed a large enough order with them they would put that company's name or brand name on the machines for them. Did it come with a packet of needles? Are they round shanked?
Don't tell the Americans how much we can find machines for. They might get jealous.
What a nice pair of machines! The Vibra is actually a Jones machine. If a company placed a large enough order with them they would put that company's name or brand name on the machines for them. Did it come with a packet of needles? Are they round shanked?
Don't tell the Americans how much we can find machines for. They might get jealous.
You do have some lovely machines that are different from what is readily available here in the States.
Bluebell, those are very lovely machines, enjoy!
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM