Vintage Sewing Machine Shop.....Come on in and sit a spell
Sadly, I think SOMEONE actually sanded them off. Not me!
Nancy
Senior Member
Join Date: Jun 2012
Location: Minnesota, USA
Posts: 396
[ATTACH=CONFIG]373436[/ATTACH]Found this yesterday . $29 at Savers. Anyone know much about it? Model 21e. It's adorable!
Grant did you take that Minnesota out of a treadle and put it in that case? That bobbin winder won't work the way you have the machine now unless you know a secret I don't know? Did you get the machine with the friction pulley motor added? That was one of the problems when people put a motor on their treadles - the bobbin winder! Or maybe, you could put a tire on the bobbin winder so it will connect to the hand wheel when you try to use it? Interesting!
Nancy
Nancy
Oh, and yes, it does have a feed drop and zig zag. The stitch width is regulated by the lever just below the black knob. The black knob controlls the needle left and right setting. The center position is straight zig zag and the left setting is just zig and the right is just zag. I hope that makes sense.
Grant very nice machines! How and what did you use to get all the metal parts so clean, and shiny!?
Anamaria
Anamaria
I did not but I can tell that at one time it was in a Treadle. It has a generic conversion done to it and my guess it was a pretty late conversion. Later motor and bracket as well as a 50's tweed case. [ATTACH=CONFIG]373439[/ATTACH] The motor mount was drilled and tapped into the back of the machine to mount the motor bracket. There is not a motor lug on it. Ahhhh, the bobbin winder. Two different belts of different sizes. Slip one off and slip the other on to wind a bobbin. No clutch wheel loosening for this baby. lol. It works amazingly well and super simple. It took me a minute to figure it out but I remembered the other belts in with the accessories and it was simple. If you have a treadle, It is for sale.
Grant did you take that Minnesota out of a treadle and put it in that case? That bobbin winder won't work the way you have the machine now unless you know a secret I don't know? Did you get the machine with the friction pulley motor added? That was one of the problems when people put a motor on their treadles - the bobbin winder! Or maybe, you could put a tire on the bobbin winder so it will connect to the hand wheel when you try to use it? Interesting!
Nancy
Nancy
On the painted surfaces I ALWAYS use and swear by CAR WAX! I can't say that loud enough. It will not damage the paint and is cheap and no fumes or skin problems. I'm an old gearhead that had a show car. I use a product called Nevr-Dull Wadding Polish. It is safe for all metals and works great on sewing machine parts. You can get it at auto parts stores like Auto Zone. In the cracks a wooden toothpick is best. It does not scratch the paint or chrome and can really get in there.
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM