Vintage Sewing Machine Shop.....Come on in and sit a spell
Nancy
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
[ATTACH=CONFIG]379445[/ATTACH]
Nancy, turn that knob thing on the bottom of the arm - it should come off, then take off the hand wheel and see if it won't pivot around the pressure thing so you can oil
Nancy, turn that knob thing on the bottom of the arm - it should come off, then take off the hand wheel and see if it won't pivot around the pressure thing so you can oil
Last edited by miriam; 12-01-2012 at 06:15 AM.
I saw this on the Chicago CL and had to share. I am trying to continue the Rodney-mania here on QB. http://chicago.craigslist.org/chc/atq/3429761400.html It may not be as pretty without the pink controller though. ~G~
Nancy
Nancy[ATTACH=CONFIG]379446[/ATTACH]
It looks like we could slide the whole top off the front of the machine if we took off the foot pressure release knob? Anyone done this? Anyone have a machine cast like this one?
Last edited by BoJangles; 12-01-2012 at 06:38 AM.
I was looking close at the one in Chicago too, to see if it held any clues. It looks like it has oil ports in it like my Anker did. Alas, no help. Sorry Nancy. ~G~
Here you go Nancy...what looks like a "white scrape" is actually a wisp of cotton from when I was doing a totally unnecessary cleaning....it stuck to a little screw and I missed pulling it off until after I saw the picture! LOL!
[ATTACH=CONFIG]379447[/ATTACH]
[ATTACH=CONFIG]379447[/ATTACH]
Miriam, there is no way to pivot the top off without taking off the foot pressure release knob? I don't know what you mean? That release knob is drilled into the top - no way to pivot the face of the machine around? There are also no oiling points on the top - it is totally smooth - no hole anywhere to get oil in? I will take a photo of the top!
Nancy[ATTACH=CONFIG]379446[/ATTACH]
Nancy[ATTACH=CONFIG]379446[/ATTACH]
Super Member
Join Date: Feb 2012
Posts: 8,091
Geeze, my "Rodney" is not a fluke? I can see why some of them were named certain names, but "Rodney" just seems kinda weird to name a sewing machine! My Rod was just incredulous that anyone would name a machine Rodney - now two different versions? How funny is that!!!!! I'd get that one too, if I were within driving distance!
Miriam, those wires looked melted together, who knows why. But, did you see the machine had been serviced in 1995? We are trying to figure out how to get it open so I can clean and oil inside?
Cathy, this machine is cast in one piece from the top to the front. In order to get the top off to oil the machine, we'd have to take off the foot pressure release knob on top? I don't know how complicated it would be to put it back? There is no other way to oil the thing? Have you dealt with a machine like this before? I am afraid to use it much without oiling/cleaning it? I can oil the bottom and inside the back door, but there is no way to get oil in the front or top?
Nancy
Miriam, those wires looked melted together, who knows why. But, did you see the machine had been serviced in 1995? We are trying to figure out how to get it open so I can clean and oil inside?
Cathy, this machine is cast in one piece from the top to the front. In order to get the top off to oil the machine, we'd have to take off the foot pressure release knob on top? I don't know how complicated it would be to put it back? There is no other way to oil the thing? Have you dealt with a machine like this before? I am afraid to use it much without oiling/cleaning it? I can oil the bottom and inside the back door, but there is no way to get oil in the front or top?
Nancy
The presser foot tension adjuster is an assembly. It just unscrews like a regular one. It won't come apart.
There is probably a screw on the right side behind the hand wheel, and a screw or a spring latch under the front end.
It's not rocket surgery, you can do it .....
Joe
Super Member
Join Date: Nov 2006
Location: las vegas nv.
Posts: 2,452
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM