thread conditioning embroidery floss?
10-26-2018, 07:23 AM
#1
Super Member
Thread Starter
Join Date: Apr 2016
Location: Blue Ridge Mountians
Posts: 7,076
thread conditioning embroidery floss?
Does anyone condition DMC embroidery floss with beeswax or thread heaven when doing redwork? I never have because I think it would stiffen the loops and "fluffiness" of the DMC floss, and I have never heard it recommended in project instructions. But hey, I still have trouble with knotting even after I keep my thread short, watch my needle angles, etc. Wondered if any experts on the QB have any experience with keeping DMC floss unknotted or untwisted?
10-26-2018, 07:41 AM
#2
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,460
I have switched to the #8 perle cotton balls rather then floss for all my embroidery. No more worrying about keeping all the strands even and I use John James embroidery needles #8. I am using up my floss on tied quilts.
10-26-2018, 10:17 AM
#4
Super Member
Join Date: Jun 2007
Location: British Columbia
Posts: 8,045
I have never conditioned my embroidery floss. I do cut it about 18". and stop and let it dangle out the twists..and every once in awhile say a few bad words when it gets knotted, but why don't you try a little beeswax on a sample to see how it handles?
10-26-2018, 11:04 AM
#5
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,460
I don’t condition my perle cotton but I do let the needle dangle every so often if my thread twists. For some reason regular thread and perle cotton gets twist because I must rotate my needle as I sew.
10-26-2018, 03:21 PM
#6
Senior Member
Join Date: May 2010
Location: SW, MI
Posts: 827
Originally Posted by Tartan
I have switched to the #8 perle cotton balls rather then floss for all my embroidery. No more worrying about keeping all the strands even and I use John James embroidery needles #8. I am using up my floss on tied quilts.
10-26-2018, 05:55 PM
#9
Super Member
Thread Starter
Join Date: Apr 2016
Location: Blue Ridge Mountians
Posts: 7,076
Originally Posted by thimblebug6000
why don't you try a little beeswax on a sample to see how it handles?
Thanks for all ya"lls ideas.
10-27-2018, 07:29 AM
#10
Super Member
Join Date: Jun 2007
Location: British Columbia
Posts: 8,045
Originally Posted by Jane Quilter
Ok, thimblebug, I'm up for a challenge. The result of using beeswax on two strands of DMC floss: It make two strands act as a single thread. The stitches look more even in width, (a good thing) and appears as "thick" thread. No knots, no twists. hmmm....so I am going for it, as all stitch types were not tried, I will report if I find some negative results. Now I am wondering why it is not recommended in the literature......
Thanks for all ya"lls ideas.
Thanks for all ya"lls ideas.
Thread
Thread Starter
Forum
Replies
Last Post
Scrappy Gram
General Chit-Chat (non-quilting talk)
24
09-02-2014 12:24 PM
