Bernina 430 BSR question
#1
Junior Member
Thread Starter
Join Date: Mar 2009
Location: Sonoma, Calif.
Posts: 175
Hi Everybody! Happy 4th of July (tomorrow)!
OK, here's the poop. I have a 2 year old Bernina 430 which is new to me (bought from a private party) and it came with a bsr AND the embroidery module. The original owner bought it, took the classes, then decided she didn't like sewing so she put it back in the original boxes and into a closet for a couple of years. I am so thankful I was able to give it a good home!
The thing is, I have been trying to practice with the BSR but it only will work in Mode 2. I am wondering if I need a computer patch, upgrade or something. I cannot get it to go into Mode 1 at all. Of course I know I need to take it to my local Bernina wizard but I was curious to see if any of you knew why because you guys know everything! Any help or advice would be greatly appreciated. Heidi
OK, here's the poop. I have a 2 year old Bernina 430 which is new to me (bought from a private party) and it came with a bsr AND the embroidery module. The original owner bought it, took the classes, then decided she didn't like sewing so she put it back in the original boxes and into a closet for a couple of years. I am so thankful I was able to give it a good home!
The thing is, I have been trying to practice with the BSR but it only will work in Mode 2. I am wondering if I need a computer patch, upgrade or something. I cannot get it to go into Mode 1 at all. Of course I know I need to take it to my local Bernina wizard but I was curious to see if any of you knew why because you guys know everything! Any help or advice would be greatly appreciated. Heidi
#3
Super Member
Join Date: Jul 2010
Location: Central Minnesota
Posts: 1,131
I rec'd a DVD with my 430, it's been very helpful. I had to refer to it for the #1 or #2. I can't remember at the moment the difference between the modes...possible check the Bernina USA web site or You tube, it has demos of most everything!
#4
Junior Member
Thread Starter
Join Date: Mar 2009
Location: Sonoma, Calif.
Posts: 175
Hi Candice. Thank you so much for your input. Well I went in and turned it on, held the start/stop button for a couple of seconds and nothing. Then turned it off and on again and held the scales button and it just went into mode 2, retried holding the start/stop again but it just stays at mode 2.
#5
Junior Member
Thread Starter
Join Date: Mar 2009
Location: Sonoma, Calif.
Posts: 175
Originally Posted by jhoward
I rec'd a DVD with my 430, it's been very helpful. I had to refer to it for the #1 or #2. I can't remember at the moment the difference between the modes...possible check the Bernina USA web site or You tube, it has demos of most everything!
#7
Super Member
Join Date: May 2009
Location: Central PA
Posts: 5,573
1. Lower feed dogs
2. Attach BSR foot to sewing machine.
3. Insert BSR plug into green socket.
The BSR symbol will appear on left side of display screen, foot icon will show foot #42 (BSR).
4. Press BSR/Balance button. Mode 1 or 2 will be selected (which ever was used last).
5. Select mode 1 or 2 by pressing appropriate number on screen.
6. Activate BSR and start stitching by stepping on foot control, or by unplugging the foot control and pushing the the start stop button. (A red light in foot will glow when machine is run in BSR mode.
When you are in Mode 1 there is constant power to need whenever you have the foot control pushed or you have pushed the start/stop button. The needle will move up and down slowly when you stop moving the fabric (until you take your foot off the pedal).
Hope this helps you get your machine going in Mode 1. However the only difference is that in Mode 2 the motor is engaged only when the fabric is moved under the foot. I like mode 1 if I have a bigger/heavier quilt on the machine. That way if a heavy part of the quilt falls off the machine....well....the needle goes up and down when the fabric moves and you can get some unauthorized quilting done before you get it stopped. LOL
2. Attach BSR foot to sewing machine.
3. Insert BSR plug into green socket.
The BSR symbol will appear on left side of display screen, foot icon will show foot #42 (BSR).
4. Press BSR/Balance button. Mode 1 or 2 will be selected (which ever was used last).
5. Select mode 1 or 2 by pressing appropriate number on screen.
6. Activate BSR and start stitching by stepping on foot control, or by unplugging the foot control and pushing the the start stop button. (A red light in foot will glow when machine is run in BSR mode.
When you are in Mode 1 there is constant power to need whenever you have the foot control pushed or you have pushed the start/stop button. The needle will move up and down slowly when you stop moving the fabric (until you take your foot off the pedal).
Hope this helps you get your machine going in Mode 1. However the only difference is that in Mode 2 the motor is engaged only when the fabric is moved under the foot. I like mode 1 if I have a bigger/heavier quilt on the machine. That way if a heavy part of the quilt falls off the machine....well....the needle goes up and down when the fabric moves and you can get some unauthorized quilting done before you get it stopped. LOL
#8
Junior Member
Thread Starter
Join Date: Mar 2009
Location: Sonoma, Calif.
Posts: 175
Well Candice that's just it....it never says Mode 1 to be able to select it. Here's what I do: turn it on, press the scales/bsr button (because the bsr is flashing on the screen) and bingo-right into Mode 2. Can't use it if the foot peddle is plugged in-of course. I really am thinking I'm needing a driver. The video wasn't any help neither was Bernina.com. I can still practice with it until I can make it to the dealer. Mode 1 was just something I wanted to try.
#9
Super Member
Join Date: May 2009
Location: Central PA
Posts: 5,573
Try plugging the foot control in and see if it gives you a Mode 1 option. I can't remember how I did it with my 440 (I now have a 730), but can you push on the area or the button below the area that it says mode 2 and get it to change? Like push the scale button a second time? As it says in my previous message, if it was turned off in mode 2 the last time it was used, that is where it would be set when it comes back on.
Good luck. The results of your FMQ don't change much with the different modes, just the amount of control you have with stopping and starting.
Good luck. The results of your FMQ don't change much with the different modes, just the amount of control you have with stopping and starting.
#10
Junior Member
Thread Starter
Join Date: Mar 2009
Location: Sonoma, Calif.
Posts: 175
Yahoo!! I did it! I'm not really sure how but I ran out of bobbin, fixed that, got back up to running, pushed the #1 stitch button and there it was Mode 1. Gonna run and try it again then write myself a big note and see if I can do it again in the morning. Thank you guys for all your help!
Thread
Thread Starter
Forum
Replies
Last Post