Did I make a mistake buying the Janome 6600?
#81
Super Member
Thread Starter
Join Date: Sep 2010
Location: California, USA
Posts: 1,318
Oh, isn't it funny how things work out and fall into place just at the right time.
I've lived in my house for almost 40 years and I am sure that if I ever give my garage a good cleaning, I am going to find some golden nuggets that I have forgotten about. Yesterday, my garage gave up one of its golden nuggets. I was putting some things away and I just noticed a flat box on the top shelf that I hadn't noticed before. Curiosity made me look inside and lo and behold I found one of those clear plastic sewing table extenders. I thought I must have bought it for my Bernina, but why would I put it in the garage and not use it? Then it hit me, I bought it from a friend for $20 about 5 years ago and it was suppose to fit a Viking sewing machine. I sold that Viking sewing machine to another friend's sister that was just taking up quilting.
What a find. I'm going to take it over to TAP plastic to have them cut out a bigger hole to fit the 6600. Those tables are pretty expensive nowadays and I think that the cut will be very nominal in comparison to buying a new table.
I've lived in my house for almost 40 years and I am sure that if I ever give my garage a good cleaning, I am going to find some golden nuggets that I have forgotten about. Yesterday, my garage gave up one of its golden nuggets. I was putting some things away and I just noticed a flat box on the top shelf that I hadn't noticed before. Curiosity made me look inside and lo and behold I found one of those clear plastic sewing table extenders. I thought I must have bought it for my Bernina, but why would I put it in the garage and not use it? Then it hit me, I bought it from a friend for $20 about 5 years ago and it was suppose to fit a Viking sewing machine. I sold that Viking sewing machine to another friend's sister that was just taking up quilting.
What a find. I'm going to take it over to TAP plastic to have them cut out a bigger hole to fit the 6600. Those tables are pretty expensive nowadays and I think that the cut will be very nominal in comparison to buying a new table.
#82
Super Member
Thread Starter
Join Date: Sep 2010
Location: California, USA
Posts: 1,318
Very pleased for you, I have had mine for about 8 years and haven't had a single problem with it. An idea for later on maybe is a tute for making it sit flush with the top of a table and this I one my husband did for me. The web thingo is http://frommartawithlove.com/diy-ike...table-tutorial. She suggests the INGO table but we go the $149 called BJORKUDDEN. We thought it was bit stronger as the machine is heavy. We didn't have the Kreg jig kit she mentions but it turned out perfectly. I think we practised making a smaller hole first and bought a finer fret saw blade when we realised the jigsaw needed more manoeuvering ability and when it was finished we placed it on the hanging board underneath with some rubber sheeting to cushion it a bit Anyway, just an idea. Cheers
By the way, I have been pricing all of the things I need for the machine and WOW what a wide range of prices for the same thing. The foot pedal sells any where from $69 to $110. The feet prices are a little closer, however. Even the power cord sells for $10 at one store and $20 at another. I've made a chart in Excel of who sells what and for how much so that I can purchase at the best possible prices. It looks like I will have to buy what I need a little at a time.
#84
Super Member
Thread Starter
Join Date: Sep 2010
Location: California, USA
Posts: 1,318
Hi everyone:
I just picked up all the parts for my 6600. The gentleman that sold me the parts tested out the machine and it purrs like a lion. I would say a kitten, but this machine has POWER. I am really impressed; it makes my Bernina 1530 seem like a kid's toy now. I'm really excited to learn about all the bells and whistles with this machine, as I also purchased several of the AcuFeed feet, including the blue dot bobbin holder.
One surprising thing about the machine was when the sewing machine plate was taken off, to expose the bobbin holder, the machine was as clean as a whistle, there wasn't one speck of dust or lint in the machine. If the outside of the machine didn't look like it was well-used, I would say that no one has sewn with this machine at all. I've never seen such a clean inside. It seems when you clean out your machine from the dust and lint, it still looks like it has been used. So, I was very surprised to see it so ultra-clean on the inside.
Thank you, everyone, for your great feed-back and well-wishes and letting me know not to worry about buying a pig-in-a-poke. It all turned out really well and I am looking forward to sewing my next quilt.
I just picked up all the parts for my 6600. The gentleman that sold me the parts tested out the machine and it purrs like a lion. I would say a kitten, but this machine has POWER. I am really impressed; it makes my Bernina 1530 seem like a kid's toy now. I'm really excited to learn about all the bells and whistles with this machine, as I also purchased several of the AcuFeed feet, including the blue dot bobbin holder.
One surprising thing about the machine was when the sewing machine plate was taken off, to expose the bobbin holder, the machine was as clean as a whistle, there wasn't one speck of dust or lint in the machine. If the outside of the machine didn't look like it was well-used, I would say that no one has sewn with this machine at all. I've never seen such a clean inside. It seems when you clean out your machine from the dust and lint, it still looks like it has been used. So, I was very surprised to see it so ultra-clean on the inside.
Thank you, everyone, for your great feed-back and well-wishes and letting me know not to worry about buying a pig-in-a-poke. It all turned out really well and I am looking forward to sewing my next quilt.
#85
Member
Join Date: Apr 2013
Posts: 17
I have a 6600 and love it. That was a good price even if you have to have it checked out. You can get accessories
just about anyplace. Look on eBay. I have a friend that paid $800 for a used one with all the normal accessories and she loves it. I have two Janomes. Just get a Janome dealer to fix it if needed.
just about anyplace. Look on eBay. I have a friend that paid $800 for a used one with all the normal accessories and she loves it. I have two Janomes. Just get a Janome dealer to fix it if needed.
#86
Junior Member
Join Date: May 2013
Location: Oxford, CT
Posts: 126
Heck NO! Even at $442, you got a steal! The 6600 is a tank. It will see thru anything & will last forever with very little maintenance. Do yourself a favor & have your local service center give it a "once over"...use good quality (non linty) thread & your new BFF will perform like the workhouse it is. Pat yourself on the back for getting "such a deal" 😃. Enjoy!
#87
Super Member
Join Date: Aug 2015
Location: Central Texas
Posts: 1,310
Try this site. They have all sorts of items for different type machines. You could pick the feet you would use first and add to your foot collection as you need them.
http://www.sewingmachinesplus.com/janome-sewing-machines.php
http://www.sewingmachinesplus.com/janome-sewing-machines.php
#88
Member
Join Date: Oct 2013
Location: Northern Michigan
Posts: 43
I love mine; just bought one for my oldest daughter and she is LUV with it. It replaced by Pfaff I lost in our house fire 5 years ago but I've been happy with this Janome. I hope you're pleasantly surprised once you get it working.
Thread
Thread Starter
Forum
Replies
Last Post
meyert
General Chit-Chat (non-quilting talk)
10
03-18-2014 09:33 AM
Margie
General Chit-Chat (non-quilting talk)
28
05-30-2010 10:21 PM