Disappearing 4 Patch, pressing issues
#1
Member
Thread Starter
Join Date: Mar 2011
Posts: 15
Disappearing 4 Patch, pressing issues
Hello! I'm back into quilting after veering off into the land of knitting for a while. I'm putting together a disappearing 4 patch, where I'm turning every other block 90 degrees. I've pressed all the blocks the same, so now I've got joins where the seams are going in the same direction. What's the best way to put this together? I guess I can re-press all the offending seams in the opposite direction. Should I do all the re-pressing in advance? Or re-press as I go?
#3
Senior Member
Join Date: Sep 2013
Location: Saskatchewan
Posts: 838
I wouldn't bother repressing... I would just sew them as they are. Sometimes it happens, and it's not the end of the world.
I just finished a quilt top where because of how it was constructed, seams went every which way. Sometimes they locked, other times they were in the same direction. It would have been almost impossible to plan so that they would match, and repressing wasn't an option because some were sewn down elsewhere in the block. I just went with it, and it turned out fine; once it was assembled I couldn't even tell from the front.
PS: Welcome back to quilting!
I just finished a quilt top where because of how it was constructed, seams went every which way. Sometimes they locked, other times they were in the same direction. It would have been almost impossible to plan so that they would match, and repressing wasn't an option because some were sewn down elsewhere in the block. I just went with it, and it turned out fine; once it was assembled I couldn't even tell from the front.
PS: Welcome back to quilting!
#4
Super Member
Join Date: Oct 2012
Location: Minneapolis, Minnesota
Posts: 1,012
If you know the layout of your blocks, pressing them in advance would be quicker. You can also just leave them as is. In my experience, there are some patterns where having alternating seams is impossible.
And Mom, pressing seams open is totally acceptable. I've made many patterns, especially modern quilt patterns, where the instructions call for pressing seams open. It's a matter of choice, and I think it's certainly better than having two seam allowances going the same direction. It does take a lot longer, which is why I avoid it if possible.
And Mom, pressing seams open is totally acceptable. I've made many patterns, especially modern quilt patterns, where the instructions call for pressing seams open. It's a matter of choice, and I think it's certainly better than having two seam allowances going the same direction. It does take a lot longer, which is why I avoid it if possible.
#5
Member
Thread Starter
Join Date: Mar 2011
Posts: 15
Thanks everyone. I think I'll try re-pressing in advance. It might not be as bad as I think, as the blocks can be flipped 180 degrees if necessary. But also, I won't worry if I end up with seam allowances going in the same direction. (even though the thought grates on me!) I also just finished a small quilt where my final seams I pressed open. That is not easy. Especially when you forget to turn off the steam. Ouch!
#8
Super Member
Join Date: Apr 2016
Location: Blue Ridge Mountians
Posts: 7,075
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
21
02-13-2011 09:17 PM
craftybear
Links and Resources
3
08-03-2010 06:21 AM