sewdarnbusy

I use an edge stiching foot, set to 1/4" so I don't do too much ripping. However, paper peicing requires ME to rip every seam several times before I get it right. So I love my Fons & Porter Ripper.

patricej

let's approach the question from a different angle.

"Are my stitches too small maybe? I think it's 2.2 and I have a Janome 6600."

your stitches are not too small. they may not be the right size to work with that tool in the way you're used to using a seam ripper, but that doesn't mean there's anything wrong with either the stitches or the ripper.

there are two ways to use a seam ripper. (1) as a stitch picker; or (2) as a stitch cutter.

when we slip the long, straight tip under a stitch and use it to pull out the threads, or to cut that single stitch, we are stitch picking.

when we put the tool between the two layers of fabric and use the sharp curved "innie" to cut the stitches (one or more at a time) we are stitch cutting.

i've never used the gingher so i have to guess which method it's designed for. my guess is that it's designed as a stitch cutter. it looks ideal for that method. since it's a gingher i feel safe assuming it will serve you well and for a very long time if you use it that way.

i'm a stitch picker. it's the method that works best for me because i have a tendency to slip and cut holes in my fabric when i try to use the cutting technique. i buy tools that have very thin tips so they'll fit under small stitches. if i've misplaced my favorite tool and can only find the one with the "big clunky" tip, i just make my stitches big enough to fit it.

i use a Janome MC6600. while piecing, i find that a stitch sized 2.5 will accomodate just about any size ripper tip. for quilting, i crank it up to at least a 3.

soooooo, you can either increase your stitch size so you can use the tool for picking, or you can teach yourself to use it for cutting. if you do that, the stitch size won't matter at all. the only things required are good light and a steady hand. :-)

nanna

It is very pretty, knew I had to have it. I ripped the leg seam out on a pair of jeans, and it has been really dull since. Guess I can just display it in my sewing room...

patdesign

[quote=GwenH]Sounds like how I do it, only mine is not a clover, its a no name with a tiny blade.

gale

I decided to return the gingher one the next time I'm at Joann's. I found one today that looks just like it, only with a plastic handle, for 1/4 the price of the gingher on sale.

Grandma Kathy

I also purchased the Gingher ripper and am not impressed with it either. haven't taken it back yet but I should. I use the Fons & Porter seam ripper and it is great

ConnieF

Yes for quilting your sts set at 2.2 is to short...
Try a 3.0 to 3.5 is the normal unless doing a barjello or
a srtip pattern you are going to be cutting..

Another thing to also think about the more stitched per ich the weaker the seam will be.

Think of it this way a picec of vinal the closer the stitches the easier it tears.

Good luck,
ConnieF

Debo

I use the Harvel. It is wonderful! I call him Jack for Jack the Ripper! We know each other very well.

JoanneS

2/2 is VERY small. Try 2.5. That way, if you have to 're- sew', it's easier to rip out.

I use my seam ripper on the bobbin side and cut through about every 1/2 inch. Then pull the thread from the needle side - comes out like zipping a zipper. Use a piece of masking tape to pick up the loose threads.

hperttula123

I actually prefer to use a straight edge razor. They are super sharp!!!