Juki 2010 problem
#1
Juki 2010 problem
I am having the thread wind around the needle as I FMQ. Have a topstitch needle, Superior 100/16 in, had been using the Singer 100/16. Did not have this problem before. Now don't know what is happening. Have rethreaded, changed needles, slowed down and sped up FMQ and have played with tension. Has anyone had this happen to them? This also has been happening doing straight line FMQ.
Feed dogs are down stitch length is at 0 and presser foot tension is set at the top per manual. Thanks in advance for any help you can give me.
Feed dogs are down stitch length is at 0 and presser foot tension is set at the top per manual. Thanks in advance for any help you can give me.
#3
No problem when straight stitching with regular foot. This problem just started a few days ago. Pryor to that no trouble. Could be me, but if it is don't know what I am doing differently.
#5
Super Member
Join Date: Apr 2012
Posts: 1,165
Is your thread curled coming off the spool?
Some instructions tell you to lower thread tension, no foot tension, and with the hopper foot releasing all tension on every lift, thread coming off curled could wind around.
Some instructions tell you to lower thread tension, no foot tension, and with the hopper foot releasing all tension on every lift, thread coming off curled could wind around.
Last edited by Weezy Rider; 10-14-2016 at 02:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post