JukiTL2020Q Needle Threader
07-19-2020, 07:49 AM
#11
Super Member
Join Date: Aug 2013
Location: Florida
Posts: 5,965
Yes, it's a dud. Better off to just forget it's there. I did. I also replaced the little straight screw with a larger thumb screw from an older singer machine. So much better than having to get a screwdriver every time. And I can tighten it with a screwdriver if I need.
07-19-2020, 11:59 AM
#12
Junior Member
Join Date: Jan 2018
Posts: 253
I have the Juki 2010Q, and find the needle threader to work well provided you do it correctly. Granted, It is not as full proof as other computerized machines, but it does work. As others have mentioned, use your UP/Down button to raise the needle to the right height. Second, after you loop the thread around that back hook and then up in front of the needle, make sure you get your thread in that little plastic groove in front of the needle mechanism, and gently pull thread to the right of it and then back around the right side of the needle. It is like making a U turn from where you first inserted the thread into the hook in
back. You gently release the button, and wallah it is threaded.
Once you know the idiosyncrasies of how to do it, you will get it at least 80-90% of the time. I wish I could draw a picture for you. If you understand what I'm saying, try it, and let me know if it worked for you.
Here is a much better video that will show you how it is done. She shows the needle threading after she shows how to thread the machine. You can click on the Settings symbol on the bottom of the YouTube screen and change the speed down from Normal to either. 50 or 75. This helps see better. Watch it several times. Notice how she holds and positions the tread.
https://www.youtube.com/watch?v=X6D5...arlingMushroom
back. You gently release the button, and wallah it is threaded.
Once you know the idiosyncrasies of how to do it, you will get it at least 80-90% of the time. I wish I could draw a picture for you. If you understand what I'm saying, try it, and let me know if it worked for you.
Here is a much better video that will show you how it is done. She shows the needle threading after she shows how to thread the machine. You can click on the Settings symbol on the bottom of the YouTube screen and change the speed down from Normal to either. 50 or 75. This helps see better. Watch it several times. Notice how she holds and positions the tread.
https://www.youtube.com/watch?v=X6D5...arlingMushroom
Last edited by Schill93; 07-19-2020 at 12:17 PM.
07-19-2020, 01:41 PM
#13
Power Poster
Thread Starter
Join Date: Jul 2017
Location: Central Ohio
Posts: 15,236
Thanks for all the replies.
I watched every Youtube video available about 3 years ago.
Well, I rewatched them and suddenly my threader is working!!
I threaded it 3 times yesterday and it worked. Maybe my complaining did something haha
I watched every Youtube video available about 3 years ago.
Well, I rewatched them and suddenly my threader is working!!
I threaded it 3 times yesterday and it worked. Maybe my complaining did something haha
07-19-2020, 07:55 PM
#14
Super Member
Join Date: Jul 2013
Location: Houston, TX
Posts: 9,713
I have the 2200 QVP Mini which is basically the same machine. I've never been able to get the needle threader to work. When I took the guide class, the teacher had problems with it too. I finally just gave up on it.
