Go Back  Quiltingboard Forums >
  • Main
  • Managing Large Amount of Fabric >
  • Managing Large Amount of Fabric

  • Managing Large Amount of Fabric

    Thread Tools
     
    Old 08-15-2020, 06:09 AM
      #11  
    Member
    Thread Starter
     
    Chaz_Hoosier's Avatar
     
    Join Date: Aug 2020
    Posts: 20
    Default

    In other news, are those two hinge pins really supposed to be the only things holding the machine up when it is stored away? I was fixing the underside of the table while looking at a 25 pound sewing machine suspended over my face.
    Chaz_Hoosier is offline  
    Old 08-15-2020, 07:18 AM
      #12  
    Super Member
     
    Join Date: Sep 2011
    Location: Carroll, Iowa
    Posts: 3,477
    Default

    When I'm at the end of making my quilt and am adding borders I'll fold the length back and forth and lay it on my lap so as I run it thru the needle the weight is in my lap. Or if you have any pool noodles roll the length on that and lay it on your lap if possible. I have an extra sewing machine I use, placed at one end of my cutting table (4x8) and run the quilt thru this machine to add the borders and/or binding. This way most all the weight is laying on the table and not hanging down over the table. Sure beats breaking needles.
    Snooze2978 is offline  
    Old 08-15-2020, 07:49 AM
      #13  
    Super Member
     
    Join Date: Jun 2012
    Location: Southern California
    Posts: 1,046
    Default

    Are you pressing hems, folded in place, too? That helps eliminate any pulling on the fabric you may be doing to get it in place.
    SallyS is offline  
    Old 08-15-2020, 08:10 AM
      #14  
    Member
    Thread Starter
     
    Chaz_Hoosier's Avatar
     
    Join Date: Aug 2020
    Posts: 20
    Default

    Hems are all neatly pressed and hemmed--it's all in the fussy steps innit? I have tried neatly folding the panel with mind to how it feeds through the machine, and so far it's going OK. I better run out to Wally World to get more medium-duty needles just in case! Thank you for the tips, gang!
    Chaz_Hoosier is offline  
    Old 08-15-2020, 02:28 PM
      #15  
    Power Poster
     
    Jingle's Avatar
     
    Join Date: Dec 2009
    Location: Outside St. Louis
    Posts: 38,224
    Default

    I would get heavy duty needles. Medium duty would be too light, I think.

    Good luck with your drape making.
    Jingle is offline  
    Old 08-15-2020, 03:54 PM
      #16  
    Member
    Thread Starter
     
    Chaz_Hoosier's Avatar
     
    Join Date: Aug 2020
    Posts: 20
    Default

    Heavy duty needles are probably a good idea. Four needles gave their lives for these curtains. Their sacrifice was not in vain.
    Attached Thumbnails 20200815_175548.1.jpg  
    Chaz_Hoosier is offline  
    Old 08-15-2020, 04:26 PM
      #17  
    Gay
    Super Member
     
    Join Date: May 2012
    Location: S.E. Queensland, Australia
    Posts: 1,487
    Default

    I put a hook in the ceiling to hang long dresses while I sew the hems, so they don't hang to the floor.
    Perhaps you could do the same using a length of dowel (the metal type with a hole ) and feel wire through to hang the curtains, like an oversized coathanger.
    Another thought is similar to a frame some quilters have constructed with poly pipes (forgot what they're made of).
    Gay is offline  
    Old 08-16-2020, 05:16 AM
      #18  
    Super Member
     
    Join Date: Nov 2010
    Location: Utah
    Posts: 2,093
    Default

    If you can tighten the presser foot tension, it will help feed the fabric more evenly. On an old Singer, it's the round metal knob on the top, left.

    Also, Singer needles are smaller at the top, and can work loose. Use a Schmetz or Organ needle.

    Last edited by quiltedsunshine; 08-16-2020 at 05:18 AM.
    quiltedsunshine is offline  
    Old 08-16-2020, 06:53 AM
      #19  
    Super Member
     
    Join Date: Aug 2018
    Location: Greater Peoria, IL -- just moved!
    Posts: 6,164
    Default

    As you've found, there are tricks and techniques for dealing with large pieces of fabric. Grats to you for working through it and learning what worked for you, you'll be able to share that with the next person

    I don't think accordion folding the piece so you can keep it on your lap while supporting the unsewn weight was mentioned. Likewise, I've spent many hot months (it always seems like I have a quilt that requires me to finish it in the summer) with fabric slung over my shoulder...
    Iceblossom is offline  

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter