Need help with pre-wound bobbins
#31
I always use prewound and found if you take your finger and gently run the bobbin around in your hand the end will pop out I love prewounds because of the fact that you can stitch out a bigger design with less change outs you can also put a couple in a plastic bag like you use for sandwiches and gently toss them around in the bag like you are trying to coat meat with flour. Hope this makes sense.
#32
Member
Join Date: May 2019
Posts: 1
My machine takes Singer #15 plastic sided bobbins. I have 3 thread boxes, , they hold 64 large spools and can hold the bobbin on the same tab as the thread. Sulky Slimline Universal Slimline Storage Box, so I have lots of colors. I bought 2 boxes of 36 prewound bobbins, the only duplicates were the black and white. Anyway...today I could not find the end of the thread, so now I'm here. I tried all the suggestions. I ended up closely looking at several bobbins I had not started to use yet, with a magnifying glass. They all had the end of the thread in the center of the spool. I had been trying to find it on either of the sides. I went back to the problem one and used the scotch tape pressing on the center all the way around, and the miracle happened and the end showed itself. I hope this helps.
#33
Super Member
Join Date: Oct 2011
Location: Hampstead N.C.
Posts: 1,870
I think better to throw out rather then donate to a thrift shop. I often shop in thrift shops and would not want to purchase this frustration. Just a thought.
There is no end to catch with scotch tape, tweezers, etc. As mentioned earlier, it seems to be a continuous loop. With a lot of cuss words and crude gestures, I have managed to use up several of my bobbins, but I believe I have come to the end of my rope and will probably donate them to a thrift store -- let someone else deal with them. Thank you all for your replies. It has been good to know that it has not been my ineptitude.
LeeJay
LeeJay
#34
Member
Join Date: Apr 2020
Posts: 1
Use tape
I normally wind my own bobbins, but I found some Singer pre-wounds at a really good price, so I bought a bunch of them. I am having so much trouble finding the end of the thread to start a new bobbin. Is there a trick to this, am I inept, do I need a special code word-- or what? I really like the convenience, but am getting ready to toss them
LeeJay
LeeJay
#35
Junior Member
Join Date: Jul 2017
Posts: 112
#37
I bought a brand new Singer Heavy Duty machine a bout 3-4 years ago. I have not needed it because I was using other machines; so I just set it (covered of course) under a table in my sewing room. Last month my other machine malfunctioned; so I just pulled out the new Singer. I have been sewing for years; so I do know how to sew. I set the Singer up and threaded it and put a full bobbin in. Imagine my surprise when I pressed on the foot pedal and I could hear the motor running, but the machine would not sew a stitch. It is back under the table, and I will not ever be buying another Singer. I have a Janome 9400, a Bernina, and Elna, and a Necchi. They all work. Considering Singer as a brand, I am really not in the frame of mind for "now, now, now."
Thread
Thread Starter
Forum
Replies
Last Post