Needle sizes needed
#1
Senior Member
Thread Starter
Join Date: Jan 2014
Location: Southern Illinois
Posts: 303
Needle sizes needed
I'm getting ready to star practicing my straight line and FMQ quilting. There are so many sizes of needles that I don't know what I'm going to need. All I have on hand is Schmetz quilting needles and some universal needles that came with my machine. What sizes do you experienced quilters use? I thought now would be a good time to order since Joanns has cheap shipping today. I sew with a Brother PQ 1500S machine if you need to know and I use Aurafil 50wt thread
#2
Power Poster
Join Date: Jun 2011
Location: Southern California
Posts: 19,131
I use Mettler thread on my Bernina 1530 and normally I use either a 12 or a 14 size of Schmetz quilting needles. There is an very informative chart when I Google Schmetz needles describing what each type of needle is for. Universal needles are a general purpose needles for using on both knits and woven.
http://www.schmetzneedles.com/learni...C-brochure.pdf
http://www.schmetzneedles.com/learni...C-brochure.pdf
#5
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,395
For stitch in the ditch quilting with my older (1980s pfaff) - I usually used an 80 schmetz regular or universal needle and the cotton covered coats and clark dual duty thread.
And - gasp - 15 to 20 yearrs and many washings later - the bindings are starting to fray, but otherwise the quilts are holding up well.
I try to use as small size as possible that will handle the job. ( whyy use a pitchfork when a table fork will do?)
For heavy denims, I do use the needles for jeans/ denim.
And - gasp - 15 to 20 yearrs and many washings later - the bindings are starting to fray, but otherwise the quilts are holding up well.
I try to use as small size as possible that will handle the job. ( whyy use a pitchfork when a table fork will do?)
For heavy denims, I do use the needles for jeans/ denim.
#6
Power Poster
Join Date: Jan 2011
Location: Southern USA
Posts: 15,943
I have the same Brother machine. I use Titanium coated Topstitch needles. They stay sharper much longer when machine quilting then other needles. Aurifil 50wt is 2 ply. I use a size 18/12
Here is the guideline I use:
Here is link to good online information about thread and needles. http://www.superiorthreads.com/education/
Here is the guideline I use:
- 12wt. - 30wt. Threads: 100/16 Needle
- 40wt. Threads: 90/14 Needle
- 50wt. Threads: 80/12 Needle
- 60wt. Threads: 70/10 Needle
- MonoPoly (Invisible monofilament): 70/10 Needle
Here is link to good online information about thread and needles. http://www.superiorthreads.com/education/
#7
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,395
I agree wholeheartedly with Onebyone. You most definitely want a topstitch needle. They have a larger eye and longer scarf. The scarf is the indentation in the needle that the thread lives in as the needle goes in and out of the fabric. A larger eye and longer scarf means less friction on the thread, and it won't fray and break.
I have the exact same machine, and when I had it on a frame, I used size 18 needles. If I went to a smaller size, I got lots of skipped stitches.
Hope this helps!
I have the exact same machine, and when I had it on a frame, I used size 18 needles. If I went to a smaller size, I got lots of skipped stitches.
Hope this helps!
#8
It usually depends on the weight of thread you're quilting with. If using .004 nylon, you could go as low as a size 70, but if you're using a 30-weight, you would need to step up to a size 80. Most machine quilting experts don't recommend using anything bigger than a size 80 because of the holes that are created with those bigger needle sizes.
#9
Senior Member
Join Date: Sep 2012
Location: Washington
Posts: 855
I have the same Brother machine. I use Titanium coated Topstitch needles. They stay sharper much longer when machine quilting then other needles. Aurifil 50wt is 2 ply. I use a size 18/12
Here is the guideline I use:
Here is link to good online information about thread and needles. http://www.superiorthreads.com/education/
Here is the guideline I use:
- 12wt. - 30wt. Threads: 100/16 Needle
- 40wt. Threads: 90/14 Needle
- 50wt. Threads: 80/12 Needle
- 60wt. Threads: 70/10 Needle
- MonoPoly (Invisible monofilament): 70/10 Needle
Here is link to good online information about thread and needles. http://www.superiorthreads.com/education/
#10
Member
Join Date: Oct 2012
Location: Northern Colorado
Posts: 76
It will also depend on the ply in addition to the weight. For example, you will need a bigger eye for a 60/3 than a 60/2 thread. I test the thread with the needle. Put the needle on a length of thread and hold it up at a 45 degree angle. Does the needle move? If it does not, go to a bigger needle. Does it fly down the length? If so, go to a smaller needle. The needle should "hop" down the thread. If it does, you have the right size.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
7
09-24-2011 10:03 AM