Oh, Halp! Fabric won't feed on my Bernina!
#41
There are lots of great "trouble Shooting Hints" on the feed!!!
i REMEMBER WHEN I FIRST HAD a problem like this... I took apart the top of my machine. cleaned and oiled the spots, took the plate off and bobbin carriage and I was so shocked to see how the threads and lent collects there... a person I know who services machines said that each time you finish a project and before you start a new, clean out the feed dogs,,,using a clean narrow brush (like one uses for painting)about a half inch size) brush around the bobbin case, put in a new needle and fresh bobbin..
It works for me and never have a build up of lint..
i REMEMBER WHEN I FIRST HAD a problem like this... I took apart the top of my machine. cleaned and oiled the spots, took the plate off and bobbin carriage and I was so shocked to see how the threads and lent collects there... a person I know who services machines said that each time you finish a project and before you start a new, clean out the feed dogs,,,using a clean narrow brush (like one uses for painting)about a half inch size) brush around the bobbin case, put in a new needle and fresh bobbin..
It works for me and never have a build up of lint..
#43
Super Member
Join Date: Jan 2011
Location: Minnesota
Posts: 4,840
Originally Posted by MarySews
Is the bobbin winder stil set to "wind"? Try pushing it away from the stem that would hold the bobbin.
#47
Well, I took Matilda to the Doctor today. Dr says there is definitely something wrong. She's going to give her a tune up and see if that will correct the issue, if not, she'll have to operate. :(
Thread
Thread Starter
Forum
Replies
Last Post
foufymaus
For Vintage & Antique Machine Enthusiasts
3
09-13-2013 02:34 PM
ButtercreamCakeArtist
Main
47
09-17-2007 05:49 PM