Piecing a Backing
03-15-2011, 09:39 AM
#1
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Solon, Iowa
Posts: 860
Ok I need help with piecing a backing, I purchased what should have been large enough for a large queen size backing with extra and when the LQS cut it, she got distracted and shorted me 12 inches. She is trying to make it right, by sending me an additional 2 yards (all she had left of this fabric), and I can't locate any more of the fabric at any other LQS's. (It's a batik, by Hoffman).
So what I have is 2 pieces WOF x 96, 1 piece WOF by 88" and 1 piece by WOF x 72"
If I go WOF x 32" on the larger two pieces, I can get 3 each and WOF x 32 on the other one I can get 2. I should be able to get WOF by 32 on the piece she is sending me, but with seam allowances I would be very tight by the time it is machine quilted as to the width of the quilt. The top measures 94" x 112". Is this possible for this size of top, I really didn't want to have to spend another weekend trying to find something else suitable for the color selection as I have also purchased coordinating thread.
I am not using any of the backing material to make the binding, I have strips from the material on the front of the quilt for this.
Please help all advice is greatly appreciated, and I know this is technically not the way the back should be pieced.
Thanks
Patti
So what I have is 2 pieces WOF x 96, 1 piece WOF by 88" and 1 piece by WOF x 72"
If I go WOF x 32" on the larger two pieces, I can get 3 each and WOF x 32 on the other one I can get 2. I should be able to get WOF by 32 on the piece she is sending me, but with seam allowances I would be very tight by the time it is machine quilted as to the width of the quilt. The top measures 94" x 112". Is this possible for this size of top, I really didn't want to have to spend another weekend trying to find something else suitable for the color selection as I have also purchased coordinating thread.
I am not using any of the backing material to make the binding, I have strips from the material on the front of the quilt for this.
Please help all advice is greatly appreciated, and I know this is technically not the way the back should be pieced.
Thanks
Patti
03-15-2011, 09:57 AM
#2
Super Member
Join Date: Nov 2010
Location: Gastonia, NC
Posts: 1,021
If I understand your measurements correctly you should be able to do it this way and end up with 9 rectangles (wof x 32) this would be great for the back. Have fun and can't wait to see the pic when you're finished.
03-15-2011, 11:09 AM
#3
Senior Member
Join Date: Jan 2011
Location: Iowa
Posts: 314
I think I'd cut the three large pieces all to the same length - 88". Then I'd take the 72" piece and cut strips 16"xWOF. Add a 16" strip to the "top" of the first large piece, another to the "bottom" of the second large piece, and another to the "top" of the third large piece. That will give you three pieces that are approximately WOF x 103". Sew each of those three pieces together along the selvage edge, and you'll end up with a backing piece that is approximately 103"x120", plenty big enough for a 94"x112" top.
Good luck!
Good luck!
03-15-2011, 02:19 PM
#4
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Solon, Iowa
Posts: 860
Originally Posted by EIQuilter
I think I'd cut the three large pieces all to the same length - 88". Then I'd take the 72" piece and cut strips 16"xWOF. Add a 16" strip to the "top" of the first large piece, another to the "bottom" of the second large piece, and another to the "top" of the third large piece. That will give you three pieces that are approximately WOF x 103". Sew each of those three pieces together along the selvage edge, and you'll end up with a backing piece that is approximately 103"x120", plenty big enough for a 94"x112" top.
Good luck!
Good luck!
03-15-2011, 02:25 PM
#5
Senior Member
Join Date: Jan 2011
Location: Iowa
Posts: 314
Originally Posted by pstoner
Originally Posted by EIQuilter
I think I'd cut the three large pieces all to the same length - 88". Then I'd take the 72" piece and cut strips 16"xWOF. Add a 16" strip to the "top" of the first large piece, another to the "bottom" of the second large piece, and another to the "top" of the third large piece. That will give you three pieces that are approximately WOF x 103". Sew each of those three pieces together along the selvage edge, and you'll end up with a backing piece that is approximately 103"x120", plenty big enough for a 94"x112" top.
Good luck!
Good luck!
This won't look funny or weird?
03-15-2011, 02:28 PM
#6
Senior Member
Join Date: Jan 2011
Location: Dayton, OH
Posts: 661
Hi,
Go to the site for John Flynn quilting frames. He has a whole write up for piecing your back. He explains why you should not necessarily put a seam down the middle of your quilt. Saving fabric is one good reason to use this method. Also it helps when storing the quilt. He works through all the math, so just follow it step by step for your situation.
It can be found here:
add: http://
to: flynnquilt.com/workshop/FreeLessons/
see: Diagonal Pieced Back
Can't put it all together as a link or will lose the message.
Hope this helps.
Pam M
Go to the site for John Flynn quilting frames. He has a whole write up for piecing your back. He explains why you should not necessarily put a seam down the middle of your quilt. Saving fabric is one good reason to use this method. Also it helps when storing the quilt. He works through all the math, so just follow it step by step for your situation.
It can be found here:
add: http://
to: flynnquilt.com/workshop/FreeLessons/
see: Diagonal Pieced Back
Can't put it all together as a link or will lose the message.
Hope this helps.
Pam M
03-15-2011, 02:32 PM
#8
Senior Member
Join Date: Jan 2011
Location: Dayton, OH
Posts: 661
Hi Patti,
You might also think about adding a topper section to the back of your quilt. It is a section of matching blocks or fabric that co-ordinate with the top so that it can be turned down on the bed and look nice.
This would help with the amount of fabric needed for the back as you would not need as much. I would still use the diagonal piecing method for the back.
Pam M
You might also think about adding a topper section to the back of your quilt. It is a section of matching blocks or fabric that co-ordinate with the top so that it can be turned down on the bed and look nice.
This would help with the amount of fabric needed for the back as you would not need as much. I would still use the diagonal piecing method for the back.
Pam M
03-15-2011, 05:02 PM
#9
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Solon, Iowa
Posts: 860
Ok perhaps that I am missing something when reading his instructions "method for diagonally piecing a quilt back from one peice of fabric, is the most efficient way to make the back whenever the width of the quilt back is one and a half times or less than the width of the fabric you plan to use. If the width of your back fabric is 44", use Joh's metod whenerve the width you want your back is 66" or less"
My back needs to be 96" or wider.
and my wof is 45".
Go to the site for John Flynn quilting frames. He has a whole write up for piecing your back. He explains why you should not necessarily put a seam down the middle of your quilt. Saving fabric is one good reason to use this method. Also it helps when storing the quilt. He works through all the math, so just follow it step by step for your situation.
It can be found here:
add: http://
to: flynnquilt.com/workshop/FreeLessons/
see: Diagonal Pieced Back
Can't put it all together as a link or will lose the message.
Hope this helps.
Pam M[/quote]
My back needs to be 96" or wider.
and my wof is 45".
Go to the site for John Flynn quilting frames. He has a whole write up for piecing your back. He explains why you should not necessarily put a seam down the middle of your quilt. Saving fabric is one good reason to use this method. Also it helps when storing the quilt. He works through all the math, so just follow it step by step for your situation.
It can be found here:
add: http://
to: flynnquilt.com/workshop/FreeLessons/
see: Diagonal Pieced Back
Can't put it all together as a link or will lose the message.
Hope this helps.
Pam M[/quote]
03-15-2011, 05:07 PM
#10
Senior Member
Thread Starter
Join Date: Mar 2010
Location: Solon, Iowa
Posts: 860
Originally Posted by milp04
Hi Patti,
You might also think about adding a topper section to the back of your quilt. It is a section of matching blocks or fabric that co-ordinate with the top so that it can be turned down on the bed and look nice.
This would help with the amount of fabric needed for the back as you would not need as much. I would still use the diagonal piecing method for the back.
Pam M
You might also think about adding a topper section to the back of your quilt. It is a section of matching blocks or fabric that co-ordinate with the top so that it can be turned down on the bed and look nice.
This would help with the amount of fabric needed for the back as you would not need as much. I would still use the diagonal piecing method for the back.
Pam M
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
0
08-22-2011 02:39 PM
