Go Back  Quiltingboard Forums >
  • Main
  • Piecing warn and natural batting >
  • Piecing warn and natural batting

  • Piecing warn and natural batting

    Thread Tools
     
    Old 12-04-2010, 03:53 PM
      #11  
    Senior Member
     
    yolanda's Avatar
     
    Join Date: Mar 2010
    Location: Southern California
    Posts: 927
    Default

    Oh! I used some Heat Press Batting Tape and it works great! I also used this stuff to patch some vintage blocks that were really weak. Here is a link: http://www.heatpressbattingtogether.com/

    My friend The Batty Lady sells this online but I've not checked her prices.

    Originally Posted by vicki s
    What is the best way to piece warm and natural batting together. Do you butt it together and zig zag or just put it in the quilt and be sure to anchor it good when quilting. Have lots of larger pieces but not quite big enough. Thanks. Vicki
    yolanda is offline  
    Old 12-04-2010, 03:54 PM
      #12  
    Cyn
    Super Member
     
    Join Date: Aug 2010
    Location: Jacksonville NC
    Posts: 6,510
    Default

    Butt together and zig zag has always worked well for me.
    Cyn is offline  
    Old 12-04-2010, 04:50 PM
      #13  
    Power Poster
     
    dunster's Avatar
     
    Join Date: Mar 2009
    Location: Lake Elsinore, CA
    Posts: 15,240
    Default

    I used to overlap the two pieces slightly, then use a rotary cutter to make a wavy line through them, then use needle and thread to whip the two pieces together - no overlap. However, last time I butted the two pieces together and used the thinnest fusible interfacing to join them. I cut the interfacing into 1.5" strips, laid it on the batting where the two pieces came together, laid a strip of cotton on top of that, and pressed with a hot iron. I did it on my cutting table, since it is much longer than my ironing board. I have that batting in a quilt on the longarm now, and the seam is hanging tight and close. I will use this method again next time. (This is for cotton batting, not for poly.)
    dunster is offline  
    Old 12-04-2010, 07:19 PM
      #14  
    Super Member
     
    Join Date: Feb 2010
    Location: lexington ky
    Posts: 1,418
    Default

    I actually have done both
    katiebear1 is offline  
    Old 12-04-2010, 07:47 PM
      #15  
    Senior Member
     
    QuiltQtrs's Avatar
     
    Join Date: Mar 2010
    Location: NW Arkansas
    Posts: 984
    Default

    Use your Walking Foot, butt edges together.
    QuiltQtrs is offline  
    Old 12-04-2010, 07:48 PM
      #16  
    DJ
    Super Member
     
    Join Date: Mar 2008
    Location: Pacific NW
    Posts: 4,394
    Default

    Originally Posted by ktbb
    there are several ways - I overlap the pieces slightly then run a rotary cutter down thru the doubled portion - when I throw away the scrappy edges that have been cut away, I then have two perfectly matched cut edges, and I butt them up against each other and use the widest zig=zag to stitch them together...no double thicknesses of batting to deal with in the final product..and I don't have to tug and push the edges to match.
    Just what I do, but I use the 3-step zig zag. Works great.
    DJ is offline  
    Old 12-04-2010, 08:01 PM
      #17  
    Junior Member
     
    quiltnutt's Avatar
     
    Join Date: Apr 2010
    Location: South Florida
    Posts: 116
    Default

    I use my velvet foot aka joining foot to piece the batting together.
    This foot has a wall in the middle of the foot. You place the batting one piece on either side of the wall. Use a large zig zag stitch to piece.
    The wall keeps the batting from overlapping and a ridge will not appear.
    I use this all the time for my quilts and charity quilts.
    quiltnutt is offline  
    Old 12-04-2010, 08:12 PM
      #18  
    Super Member
     
    amandasgramma's Avatar
     
    Join Date: May 2009
    Location: La Pine Oregon, USA
    Posts: 5,907
    Default

    I just longarmed a quilt where the owner had pieced the warm and natural with a zig zag.....just PLEASE use thread that matches the warm and natural!!!! They used GREEN thread on part of it...I didn't realize it until it was too later. I white piece on the front shows the green thread behind!!!!! ARRRRGH
    amandasgramma is offline  
    Old 12-05-2010, 04:45 AM
      #19  
    Senior Member
     
    Join Date: Jul 2010
    Location: Wisconsin
    Posts: 502
    Default

    I found some fusible lightweight interfacing at Joanne's and cut it with the rotary cutter in 1 1/2 inch strips to use for piecing batting, should work on Warm and Natural too. Much cheaper than the precut tape. Or is you have some from sewing, use it up this way.

    Carol J.
    Carol J. is offline  
    Old 12-05-2010, 05:14 AM
      #20  
    Super Member
     
    JAGSD's Avatar
     
    Join Date: May 2010
    Location: South Dakota
    Posts: 1,216
    Default

    Originally Posted by Carol J.
    I found some fusible lightweight interfacing at Joanne's and cut it with the rotary cutter in 1 1/2 inch strips to use for piecing batting, should work on Warm and Natural too. Much cheaper than the precut tape. Or is you have some from sewing, use it up this way.

    Carol J.
    Thanks for this hint, I to have used the precut roll of fusible and thought it was expensive, this sounds super!
    JAGSD is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    kim_s
    Main
    16
    11-21-2012 09:53 AM
    Christine-
    General Chit-Chat (non-quilting talk)
    30
    07-07-2012 11:51 PM
    dreamer2009
    General Chit-Chat (non-quilting talk)
    5
    04-04-2011 09:52 AM
    aneternalpoet
    Pictures
    110
    11-30-2010 11:58 AM
    MissTreated
    General Chit-Chat (non-quilting talk)
    59
    07-17-2010 04:25 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter