Go Back  Quiltingboard Forums >
  • Main
  • quilt binding question updated with picures on page 2 >
  • quilt binding question updated with picures on page 2

  • quilt binding question updated with picures on page 2

    Thread Tools
     
    Old 02-12-2008, 05:43 AM
      #11  
    bj
    Super Member
     
    bj's Avatar
     
    Join Date: Apr 2007
    Location: Ft. Worth, Texas
    Posts: 3,674
    Default

    I've done the binding totally by machine once, but I didn't like it as well. Cut binding 2.5", fold in half and press. Sew to top side of quilt, raw edge of binding at raw edge of quilt. Turn and pin in the ditch on the top side of quilt. Make sure your pin is catching the binding on the back. I pinned really close together. Stitch in the ditch on the top side of the quilt where the binding is attached. It will catch the binding on the back as you sew. I used my walking foot so I wouldn't get wrinkles on the back. It turned out okay, I just didn't like it as much. I'd suggest practicing on a small sandwich with both methods and see which one you like the look of the best. Good luck. I would also check out ShellyQ's demo that Vicki gave you the link to; it really is a very good one.
    bj is offline  
    Old 02-12-2008, 09:24 AM
      #12  
    Senior Member
     
    Steve's Avatar
     
    Join Date: Aug 2007
    Posts: 707
    Default

    Hey Barb, I've tried several ways but like the one described. Sew to back, double up binding fabric and hand stitch. It is amazing how quickly the hand stitching goes and how rapidly it improves given this kind of exercise.

    Also, binding I find a complete joy because it’s the next best thing to being there (I find myself humming a lot!). Once it’s finished, you get to tag or label and that’s it!
    Steve is offline  
    Old 02-12-2008, 09:36 AM
      #13  
    Administrator
     
    patricej's Avatar
     
    Join Date: Nov 2006
    Location: Southeast Georgia, USA
    Posts: 9,132
    Default

    ok, steve ... it's official. you are NUTS!!!! joy and humming while you bind? :shock:

    you need not worry about the Quilt Police. However, if I were you, I'd run like heck from those guys sneaking up behind you with the nets and straightjacket. :lol:
    patricej is offline  
    Old 02-12-2008, 09:49 AM
      #14  
    Senior Member
     
    Steve's Avatar
     
    Join Date: Aug 2007
    Posts: 707
    Default

    No, honest Patrice, getting that close to the finish line really does me (maybe I’m too new at this?). Also, I find if you run towards the nets and jackets it freaks 'em out and you miss the maintenance visit entirely! :wink:
    Steve is offline  
    Old 02-12-2008, 10:54 AM
      #15  
    Super Member
     
    Knot Sew's Avatar
     
    Join Date: Nov 2006
    Location: NY
    Posts: 5,652
    Default

    I cut my binding the same as everyone else, but at times I have sewed it on the back and brought it to the front and top stitched by machine.......I did a decorative stitch on one I finished for grandaughter..........this wasn't traditional but it wasn't for a contest........and the quilt police were someplase else that was warmer lol :D :D :D
    Knot Sew is offline  
    Old 02-12-2008, 11:43 AM
      #16  
    Junior Member
     
    marieg's Avatar
     
    Join Date: Jan 2008
    Posts: 125
    Default

    Ditto with sewmuch. I have to say the hand sewing on the back takes me forever. I don't put bias binding on a straight edge.
    marieg is offline  
    Old 02-12-2008, 12:07 PM
      #17  
    Senior Member
     
    joannl's Avatar
     
    Join Date: Aug 2007
    Location: Ohio
    Posts: 314
    Default

    My method is the same as most; 2.5 inches, on the bias (almost always), fold in half, stitch to front, flip to back & hand sew.
    Steve, I've been quilting for 36 years & I still enjoy hand stitching the binding to the back, it's kind of a zen thing. Well, except when I really need to get that baby quilt finished for the baby that was born last week!!! LOL
    Jo
    joannl is offline  
    Old 02-12-2008, 12:56 PM
      #18  
    Administrator
     
    patricej's Avatar
     
    Join Date: Nov 2006
    Location: Southeast Georgia, USA
    Posts: 9,132
    Default

    allrighty then ... a padded room for two ... comin' right up. :lol: :lol: :lol:

    the sight of steve rushing in my direction would freak me out, too. but don't tell him i said that. :wink:
    patricej is offline  
    Old 02-12-2008, 02:15 PM
      #19  
    Super Member
     
    Join Date: Aug 2007
    Location: Clay Springs AZ
    Posts: 3,229
    Default

    I have tried several experts methods. I sew mine in the ditch using a stiche in the ditch foot. It has a metal guide in the center that keeps you in the ditch.
    Also I use iron on thread, it holds the binding in place instead of pins that keep poking you.
    Also when you are sewing the binding on the front stop at 1/4 inch from the corner and turn your fabric at an angle and sew off at the point. This helps make the miter easier.
    Rose Marie is offline  
    Old 02-12-2008, 02:27 PM
      #20  
    Super Member
     
    Tiffany's Avatar
     
    Join Date: Dec 2007
    Location: Idaho Falls
    Posts: 1,907
    Default

    Originally Posted by ccbear66
    Ok I have a questions for all of you. I'm am ready to actually bind my first quilt. Usually my quilting lady does it for me. I have read several different methods. What method do you use and why. I think that I'm going to cut my binding 2 1/5 in. Does that sound about right? One more question do you sew all of it by machine or do you sew one side and then hand stitch it to the back. I have read both ways and don't know which way would be the best.
    Thanks in advance for your help.
    I use a two and a half inch binding for my big quilts and smaller bindings for smaller projects. I sew the binding to the top of the quilt by machine and then sew the binding to the back of the quilt by hand. I have a lot of friends who prefer to sew both the front and back by machine but I have noticed it does not look as neat and I have heard quilt judges remark on it when the stitching goes outside of the area it is supposed to (when the back has shifted and is not perfectly aligned it can cause the thread to veer off onto the back of the quilt or too far into the binding, giving a raised edge) and for me, I find I prefer to bind the back of it by hand rather than machine. I hope this helps.

    I have to agree, I love putting on the binding. It's probably one of my favorite parts of making a quilt. It's like being in a marathon and suddenly you run over the hill and there, off in the distance, is the finish line. It's energizing! :!: The hardest part for me is sandwhiching a quilt, especially the king sized ones. UGH! It's the least fun part and to me it signifies that I'm only halfway done, which I find a bit despressing for some reason.
    ~Tiffany
    Tiffany is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    tapper
    General Chit-Chat (non-quilting talk)
    15
    05-22-2015 07:05 AM
    ccbear66
    Pictures
    44
    10-16-2008 08:38 AM
    NewsletterBot
    Main
    2
    09-22-2007 08:19 PM
    vicki reno
    Main
    17
    03-14-2007 06:19 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter